Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

CHECK-MATE INDUSTRIES
1911 9RD 9MM MAGAZINES

850020492329 100004787

Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding

These high-quality magazines have a unique, straight feed lip contour that helps maintain a consistent feed angle for reliable chambering of 9mm ammo. Body tube is through-hardened for superior strength and durability, then polished inside and out to eliminate drag. Follower has an extended front skirt, an anti-friction dry-film finish, and proper dimple placement for precise feed and function with every round. Floorplate is pre-drilled to accept aftermarket screw-on base pads (not included) with .524" center-to-center hole spacing. High-performance spring offers outstanding reliability and long life.

SPECS: Stainless steel, natural silver finish.

Más...

Geometría Única de Labio de Alimentación Mantiene un Ángulo Constante para una Alimentación Fiable

Estos cargadores de alta calidad tienen un contorno único de labio de alimentación recto que ayuda a mantener un ángulo de alimentación constante para un recamar confiable de munición de 9mm. El tubo del cuerpo está endurecido al máximo para una mayor resistencia y durabilidad, luego pulido por dentro y por fuera para eliminar la fricción. El seguidor tiene una falda frontal extendida, un acabado anti-fricción de película seca, y una colocación precisa de los puntos de apoyo para una alimentación y función exactas con cada disparo. La base del cargador está pre-perforada para aceptar almohadillas de base atornillables de posventa (no incluidas) con una separación entre agujeros de .524". El resorte de alto rendimiento ofrece una fiabilidad excepcional y una larga vida útil.

ESPECIFICACIONES: Acero inoxidable, acabado plateado natural.

Más...

Evaluaciones de clientes para CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4

No go with HP's (01/07/2010)

I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right

Works Great with 1911 STI (19/11/2010)

Bought 10 mags for use with a STI 1911 in 9mm.shot 3 boxes of Federal ([...]) 115gr fmj.not one single problem, also de gun is new.with 124g Montana, reloads with a minor power factor, 2 FTF, L 1.150. Well made mags.Buy the Ed Brown pads, 6 in a bag, perfect fit.Also part of the FTF was that the Recoil Spring is not for the lower loads od the reloads.I shoot USPSA 6 times a month (700-800 Rds)Also IDPA twice a month

Good Buy (03/01/2011)

Nice mags. Bought three for my STI sentry 9mm and they work very well. One mag was a little tight putting in the ninth round, but it loosened up after a range session. Other than that no problems. Will buy more in the future. I'd give 'em five stars if the base plate was removable and holes were threaded. Ed Brown bumper pads worked well, though.

Meh, might be the gun, but I think not (01/02/2012)

I bought three of these magazines to go with the Caspian 9mm 1911 I built for my wife. There is a lot of variation in these magazines, as two go into the magwell pretty easily, but the third does not--feels like the body of the magazine is too wide for the frame.

When test firing the gun (please take note of this--this was my first time firing the gun), the rounds seemed to have a tendency to nose dive into the (admittedly) short ramp on the Kart EZ Fit barrel I installed. This happened just about every round.

Also, the rounds do not seat all the way to the rear of the magazine, often feeling like the slide doesn't get a good bite onto the back of the case to feed it into the chamber properly.

Putting the last round into the magazine was pretty bad, too.

Please keep in mind, I also only fired 100 rounds during this first range session, so it was about 33-34 rounds per magazine. They may loosen up over time--I'm not convinced, however.

I am also using an STI Recoil Master, so I don't know if that's causing the problem. I do know, however, that I've had to push the rounds around after feeding them into the magazine to get them to push the nose of the bullet above the front lip of the magazine body.

I want to try a couple of different magazine types, but at this time, I can't recommend these magazines for someone who needs the gun to be completely reliable.

And who doesn't want that?

Check-Mate 9mm Mags (18/08/2012)

I have been using these in a 9mm Combat Commander for IPSC Competition. I have had no feed issues and they drop cleanly from the pistol.

Excellent build (26/07/2014)

Received the mags today and have to say, these are so good I will be changing the factory mags from my STI Spartan to these for a full set. The build quality is outstanding and the follower sits the cartridge up high for a smooth reliable feed.

Best mag for my 9 mm SA RO (26/09/2014)

Great product and great price. They are cheaper here than through SA.

Leer 7 mas calificaciones en brownells.com

42.9 42.9 1 EUR

N.º de producto: 100004787
CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD
Ref Fabricante: CM9MM9S 850020492329 Estos cargadores de alta calidad tienen un contorno único de labio de alimentación recto que ayuda a mantener un ángulo de alimentación constante para un recamar confiable de munición de 9mm. El tubo del cuerpo está endurecido al máximo para una mayor resistencia y durabilidad, luego pulido por dentro y por fuera para eliminar la fricción. El seguidor tiene una falda frontal extendida, un acabado anti-fricción de película seca, y una colocación precisa de los puntos de apoyo para una alimentación y función exactas con cada disparo. La base del cargador está pre-perforada para aceptar almohadillas de base atornillables de posventa (no incluidas) con una separación entre agujeros de .524". El resorte de alto rendimiento ofrece una fiabilidad excepcional y una larga vida útil.

42.9 EUR 32 42,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Silver Capacidad: 9-Round Cartucho: 9 mm Luger Hacer: 1911 Material: Stainless Steel Modelo: Government, Commander Cantidad: 1

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Cargador de alta calidad con un contorno de labio de alimentación recto para una alimentación constante y confiable de munición de 9mm.
Cuerpo de acero inoxidable endurecido y pulido para eliminar la fricción, con un seguidor de acabado anti-fricción y puntos de apoyo precisos.
Base pre-perforada para almohadillas de base atornillables y un resorte de alto rendimiento para una fiabilidad excepcional y larga vida útil.

Atributos

Acabado: Silver Capacidad: 9-Round Cartucho: 9 mm Luger Hacer: 1911 Material: Stainless Steel Modelo: Government,Commander Peso de entrega: 0,113kg Altura de envío: 33mm Ancho de envío: 117mm Longitud de envío: 262mm UPC : 850020492329

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Descubre los cargadores 1911 9RD 9MM de CHECK-MATE INDUSTRIES. Alta calidad y fiabilidad para tu munición 9mm. ✨ ¡Haz tu pedido ahora!

Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding

SPECS: Stainless steel, natural silver finish.

Más...

Geometría Única de Labio de Alimentación Mantiene un Ángulo Constante para una Alimentación Fiable

ESPECIFICACIONES: Acero inoxidable, acabado plateado natural.

Más...

Evaluaciones de clientes para CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4

No go with HP's (01/07/2010)

I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right

Works Great with 1911 STI (19/11/2010)