Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

EGW
1911 HEAVY DUTY SLIDE STOP

841370101542 296000162

Machines From Hardened Steel For Maximum Strength & Durability; Standard & Oversized Pins Available

Heavy duty slide stop is precision machined from steel bar stock, then heat-treated for superb hardness and durability. Ensures a precise fit to frame for secure, consistent lockup; prevents slop or “play” that can compromise accuracy. Available with standard .200" diameter pin or oversized .203" pin for custom fitting to ensure the tightest possible lockup for maximum accuracy. Both sizes available in blued 4140 carbon steel or stainless steel, both with a fine bead-blasted matte finish. Fine-line serrations on pad give your finger secure purchase to release the slide on the first pass.

SPECS: Carbon steel, matte blued (BL), or stainless steel (SS), matte finish. Pin diameter: .200" (5.1mm) or .203" (5.2mm). Calibers listed in table.

Más...

Mecanizado De Acero Endurecido Para Máxima Fuerza y Durabilidad; Pasadores Estándar y Sobredimensionados Disponibles

El retén de corredera de servicio pesado está mecanizado con precisión a partir de barra de acero, luego tratado térmicamente para obtener una dureza y durabilidad excelentes. Asegura un ajuste preciso al armazón para un bloqueo seguro y consistente; evita la holgura o "juego" que puede comprometer la precisión. Disponible con pasador estándar de .200" de diámetro o pasador sobredimensionado de .203" para un ajuste personalizado que asegure el bloqueo más ajustado posible para una máxima precisión. Ambos tamaños disponibles en acero al carbono 4140 azulado o acero inoxidable, ambos con un fino acabado mate granallado. Las finas estrías en la almohadilla ofrecen a tu dedo un agarre seguro para liberar la corredera en el primer intento.

ESPECIFICACIONES: Acero al carbono, acabado mate azulado (BL), o acero inoxidable (SS), acabado mate. Diámetro del pasador: .200" (5.1mm) o .203" (5.2mm). Calibres indicados en la tabla.

Más...

Evaluaciones de clientes para EGW 9MM/.38 SUPER, SS, .203"

Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 4,3

Worked better than I expected (22/03/2011)

Used this part in a Colt Series 80 that had developed some slop in the [frame] slide stop holes. The .203 oversize was ideal. This slide stop just fit my Wilson Combat .278 link so now the slide/barrel/frame time just right. I did not have to modify this part to install but is is possible if your link is near min spec you will need to hone the link hole.

Not Drop In (18/05/2014)

The quality of the slide stop is typical EGW but these are not drop in. You will have to file your barrel feet to make them fit.

Excellent part (14/10/2009)

These are a very high quality part. They utilize the traditional colt style pad which I like. I also like the fact that these are fully machined from solid steel vs. being cast. I will be using these from now on.

Highest Quality! (02/12/2013)

As Gunsmith, I use this Slide Stop (both CS and SSTL, 45acp and 9mm)exclusively on all of my Customer's pistols and my own. They always function perfectly and never fail. The pin is always 0.200", which is ideal for a great lock-up. Remember, you get what you pay for!!

not good for me (12/12/2014)

EGW generally has a fine product. The overall detail and machine work on this one was fine. The problem I had was the rear lug that meets the Mag follower was cut very different than from 1911 spec as well as any SS I had on hand to compare it with. Therefore, it would work with some mags (as far as holding the slide back when empty) but definitely would not with other mags (mostly the older style). Measuring the rear lug from the bottom was .2035 long. The others I had were .2065. Not much of a difference, but the contours were definitely different and maybe that's the problem.The shaft was a perfect .200 though!

para parts made out mim sloppy parts (22/02/2016)

my slide stop pin egg shaped .194 to .198 good old mim parts now nice and tight

Leer 6 mas calificaciones en brownells.com

79.9 79.9 8 EUR

N.º de producto: 296000162
EGW 9MM/.38 SUPER, SS, .203"
Ref Fabricante: 11010 841370101542 El retén de corredera de servicio pesado está mecanizado con precisión a partir de barra de acero, luego tratado térmicamente para obtener una dureza y durabilidad excelentes. Asegura un ajuste preciso al armazón para un bloqueo seguro y consistente; evita la holgura o "juego" que puede comprometer la precisión. Disponible con pasador estándar de .200" de diámetro o pasador sobredimensionado de .203" para un ajuste personalizado que asegure el bloqueo más ajustado posible para una máxima precisión. Ambos tamaños disponibles en acero al carbono 4140 azulado o acero inoxidable, ambos con un fino acabado mate granallado. Las finas estrías en la almohadilla ofrecen a tu dedo un agarre seguro para liberar la corredera en el primer intento.

79.9 EUR 3 79,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Stainless Steel Calibre: 38/357 Caliber (.357-.359), 9 mm (.355-.356), 40/10 mm (.400-.401) Hacer: 1911 Modelo: Government, Commander, Officers

EGW 1911 HEAVY DUTY SLIDE STOP

Evaluaciones de clientes para EGW 9MM/.38 SUPER, SS, .203"

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para EGW 9MM/.38 SUPER, SS, .203"

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

EGW
1911 HEAVY DUTY SLIDE STOP