Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

H-S PRECISION
700 SHORT ACTION 308 DETACHABLE BOTTOM METALS

393000037

Add all the convenience of drop-free, box magazine to your favorite Remington 700 BDL. Spring-loaded finger latch inside the triggerguard drops the box magazine free, speeds loading and unloading. Made from durable stainless steel and finished with bake-on, matte, black Teflon® coating that's self-lubricating and resists scratches and wear. Updated version have positive locking springs on the bottom of both sides of the floor plate (holds the magazine box securely in place without the rubber o-ring), a polymer boot on bottom of box (easier to remove), and a guide slot and larger rear catch on back of box (ensures proper latch).

SPECS: Stainless steel, black, matte finish. 9.3 oz.(265 g) approximate wt. Fits H.S. Precision 2000 and Rem. 700 BDL long and short actions. Will fit Rem. ADL with modifications to stock. May require gunsmithing/fitting. Magazine Capacity – Five rounds with .223, .222 & .204, four rounds with standard calibers, ten rounds available for 308 and similar calibers, three or eight rounds with magnum calibers (8rd magazine holds 7 or 8, depending on cartridge).

Más...

Añade toda la comodidad de un cargador de caja desmontable a tu Remington 700 BDL favorito. Un pestillo de dedo con muelle dentro del guardamonte permite que el cargador se desprenda fácilmente, agilizando la carga y descarga. Fabricado en acero inoxidable duradero y acabado con una capa de Teflón® negro mate horneado que es autolubricante y resiste rayaduras y desgaste. La versión actualizada tiene resortes de bloqueo positivo en la parte inferior de ambos lados de la placa base (mantiene el cargador de la caja firmemente en su lugar sin la junta tórica de goma), una base de polímero en la parte inferior de la caja (más fácil de retirar), y una ranura guía y un enganche trasero más grande en la parte posterior de la caja (asegura un cierre adecuado).

ESPECIFICACIONES: Acero inoxidable, negro, acabado mate. Peso aproximado de 9.3 oz.(265 g). Compatible con H.S. Precision 2000 y Rem. 700 BDL de acción larga y corta. Se puede adaptar a Rem. ADL con modificaciones en la culata. Puede requerir ajuste por un armero. Capacidad del cargador – Cinco balas para .223, .222 & .204, cuatro balas para calibres estándar, diez balas disponibles para 308 y calibres similares, tres u ocho balas para calibres magnum (el cargador de 8 tiene capacidad para 7 u 8, dependiendo del cartucho).

Más...

Evaluaciones de clientes para H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD

Número de evaluaciones: 8
De brownells.com: 8
Evaluación media: 3,8

Better than I expected! (28/12/2013)

This was listed as a drop in kit. But on my Remington 700 bdl, this was not the case. I needed to do a good deal of inletting and relief work to seat this kit properly. No modifying of the kit itself was needed. I used my dremmel tool and slow removal of material until I had a sound fit. Once the main body was seated there were gaps around the edges. I will be using Brownells stainless steel bedding kit to fill these gaps and insure nothing will move about. This kit allows flawless feeding of ammo to battery, and is of better quality than I had anticipated.

Just what I was hoping it would be. (21/05/2014)

I purchased this to upgrade my Remington 700 ADL to a Hogue BDL Stock + the Detachable Magazine. First is that with this Hogue stock I had to do some minor filing and fitting. It does not drop in. It is worth the work and not too hard, if you take your time. It is a great fit and improvement over firing one round at a time. Parts quality is the best I've seen. If you are the patient type you will not be disappointed.

Complete garbage (14/11/2014)

I have a H-S precision stock and this bolts in great and that's it. The rest of the product fails in historic proportions. The bullets don't feed at all. The last round never comes out of the magazine cleanly ever! I am extremely disappointed in this product especially for how much it costs and the "reputation" H-S precision has....

Also if you are a precision shooter and think your hand loads will fit. Think again. I had to the shorten the overal length to get the round to fit in the magazine itself. Again I would NEVER RECOMMEND this to anyone.

Works perfectly (12/05/2015)

I have this system with 5- and 10-round H-S magazines, fitted into the H-S Precision stock that comes from Remington as part of their Model 5R Milspec. While the system is not drop-in, it is *almost* drop-in. The only conflict is the internal latch that holds onto the magazine. When you release the latch moves outward and this conflicts with the stock crosspiece. I got out a riffler file and made a slim diagonal channel in the soft crosspiece material (no neet to touch the aluminum chassis underneath) and in 10 minutes I had a perfect drop-in fit. On my Manners T5A the same fitment is required, plus a slight enlargement of the rearmost portion of the mag well. Manners will perform this themselves at no cost on a BDL-inlet stock if you ask them at time of purchase.

As to functionality, it is perfect. If your rounds don't fit this magazine then they don't fit any magazine. then they must not conform to 7.62 NATO specs. I have run several types of ammo plus handloads with an OALT of 2.793" and they fit fine. 145gr commercial ammo has a bunch of extra room. 175gr commercial match ammo not so much, but it fits.

Very good product (09/04/2016)

Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.

Box magazine conversion #1 upgrade !! (29/07/2013)

Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.

Requires Gunsmithing (30/09/2013)

This part required a gunsmith to install on a Remington PSS with the H-S precision stock. Had to opened up with a mill.

The mags will not retain and feed rounds reliably without being tuned. The lips are far too wide apart and are flat, as opposed to curved, which would feed better.

The AI variants are much better products and better quality as well.

Great looking product! (12/08/2015)

Did my homework and selected this product for my Rem 700 Sendero based on reviews. When I installed it my first problem was the front action screw now intruded into the action and prevented the bolt from closing. The second issue was the back of the magazine made contact with the lower back bridge of the action and therefore was difficult to install and wouldn't drop from the action when the release was pressed. I installed a .012 shim to correct the problem but then had a problem feeding the last round, (yep, all it takes it .012 to jack it up). I almost sent it back but decided to try removing .015 from the front action screw. The bolt can now close and after testing over three ten round mags I can say it feeds correctly. In defense of HS Precision I seem to always have weird problems when buying and installing stuff like this. I would give it five stars if instructions addressing how to resolve potential problems had been included. I expect it to work as advertised and will repost if I have any major failures. I like that it's a double stack mag and think it's the best looking of all the DBM's on the market.

Leer 8 mas calificaciones en brownells.com

629.9 639.9 2 EUR

N.º de producto: 393000037
H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD
Ref Fabricante: AP307 Añade toda la comodidad de un cargador de caja desmontable a tu Remington 700 BDL favorito. Un pestillo de dedo con muelle dentro del guardamonte permite que el cargador se desprenda fácilmente, agilizando la carga y descarga. Fabricado en acero inoxidable duradero y acabado con una capa de Teflón® negro mate horneado que es autolubricante y resiste rayaduras y desgaste. La versión actualizada tiene resortes de bloqueo positivo en la parte inferior de ambos lados de la placa base (mantiene el cargador de la caja firmemente en su lugar sin la junta tórica de goma), una base de polímero en la parte inferior de la caja (más fácil de retirar), y una ranura guía y un enganche trasero más grande en la parte posterior de la caja (asegura un cierre adecuado).

639.9 EUR 4 639,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Black Hacer: Remington Modelo: 700

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Añade un cargador de caja desmontable a tu Remington 700 BDL para facilitar la carga y descarga.
Fabricado en acero inoxidable con acabado de Teflón® negro mate, resistente a rayaduras y desgaste.
Compatible con H.S. Precision 2000 y Rem. 700 BDL, con capacidad para hasta 10 balas en calibres .308 y similares.

Atributos

Acabado: Black Hacer: Remington Modelo: 700 Peso de entrega: 0,204kg Altura de envío: 33mm Ancho de envío: 119mm Longitud de envío: 150mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

N.º de producto: 393000031
H-S PRECISION SHORT ACTION MAGAZINE 308
Ref Fabricante: AP305 Añade toda la comodidad de un cargador de caja desmontable a tu Remington 700 BDL favorito. Un pestillo de dedo con muelle dentro del guardamonte permite que el cargador se desprenda fácilmente, agilizando la carga y descarga. Fabricado en acero inoxidable duradero y acabado con una capa de Teflón® negro mate horneado que es autolubricante y resiste rayaduras y desgaste. La versión actualizada tiene resortes de bloqueo positivo en la parte inferior de ambos lados de la placa base (mantiene el cargador de la caja firmemente en su lugar sin la junta tórica de goma), una base de polímero en la parte inferior de la caja (más fácil de retirar), y una ranura guía y un enganche trasero más grande en la parte posterior de la caja (asegura un cierre adecuado).

629.9 EUR 4 629,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Black Hacer: Remington Modelo: 700

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Mejora tu Remington 700 con el cargador desmontable H-S Precision. 🛠️ Acero inoxidable y fácil de usar, ideal para la caza y el tiro.

Más...

Evaluaciones de clientes para H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD

Número de evaluaciones: 8
De brownells.com: 8
Evaluación media: 3,8

Better than I expected! (28/12/2013)

Just what I was hoping it would be. (21/05/2014)

Complete garbage (14/11/2014)

Works perfectly (12/05/2015)

Very good product (09/04/2016)

Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.

Box magazine conversion #1 upgrade !! (29/07/2013)

Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.

Requires Gunsmithing (30/09/2013)