Cam operated quick-detach lever with an extra large finger loop replaces existing thumbnut mounting screw on EOTech for rapid installaton and removal. Does not change the mounting height of EOTech and allows co-witnessing with iron sights.
SPECS: 4140 steel, matte black. 500 Series - 25⁄8" (6.7cm) long x 13⁄32" (1cm) wide. Fits EOTech models 511, 512, 551, and 552. XPS Series - 3" (7.6cm) long x 9⁄16" (1.4cm) wide. Fits EOTech XPS2 and XPS3 sights.
Más...
Rock Solid, palanca de desconexión rápida
Cam operado desconexión rápida palanca con un dedo extra grande lazo reemplaza existente Tuerca Tornillo de montaje de EOTech para rápida instalación y remoción. No cambia la altura de montaje de EOTech y permite Co testificación con monumentos de hierro.
Especificaciones: acero 4140, negro mate. 500 serie - 25 ⁄ 8"(6,7 cm) largo x 13 ⁄ 32" (1 cm) de ancho. Se adapta a modelos de EOTech 511, 512, 551 y 552. Serie XPS - 3"(7,6 cm) de largo x 9 ⁄ 16" (1,4 cm) de ancho. Se adapta a lugares EOTech XPS2 y XPS3.
Más...
Evaluaciones de clientes para GG&G ACCUCAM LEVER FOR EOTECH 500 SERIES
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 5
Excellent, this is a must have(02/07/2010)
uses include 3 gun, hunting, general range sighting in etc. This piece is a must have for your optic as you can take it off with a throw of the lever to go open sights if necessary. This piece is expertly machined and never once have I had to make any adjustments to anything, throwing it back on and that takes only seconds...not once out of dozens of times. Installation is a snap. No cons on this piece of equipment.
Also works with the 512(23/07/2010)
I currently own two of these. One for my 552, and one for my 512. No need to un-tighten and re-tighten the thumbscrew when you wish to remove the holo, just pull on the lever, and it's off. No need to remove your gloves when it's cold. (I'm from Canada - I know what I'm talking about!) When re-mounted, it zero's immediately.
Excellent product and extremely well made. Worth every penny!
Great piece of gear!(23/07/2015)
I have always been a fan of GG and G. This lever is why. I bought my first one in 2005 for a personally owned eotech, and another in 2007 for my issued ACOG. I use them on duty, and both have been on multiple deployments. The finish is worn off them from rubbing on my kit for ten years, but they haven't rusted and still hold zero. As long as you return the optic to the same slot and apply forward pressure on the optic as you close the lever, you will not have a zero shift. I swap between my EOTech and ACOG as needed and remove them for cleaning with complete confidence.
They don't protrude excessively and the loop is plenty big enough to stick your gloved finger into. Removal is very quick (important when your ACOG hangs over your back up rear sight preventing it from opening). I have tried those little levers from ARMS and Larue and they are much harder to manipulate. It's clamping force is adjustable, just be careful as over tightening it can damage your receiver's rail. I took a chunk out of a rail on one of my issued rifles once...
We AR guys spend a lot of money on gimmicks that just wind up in the parts bin. I am an infantryman and my gear takes a beating. I have also attached just about everything you can to a rifle. I have learned that many widgets either don't work, aren't worth the weight/get in the way, or aren't tough enough to haul around all day everyday. These levers work, weigh nothing, and have survived everything I have put them through. If you need them, they are a fantastic product. I have been eyeballing a shiny new EOTech. If I buy it, this will definitely be purchased with it.
N.º de producto: 336000017 GG&G ACCUCAM LEVER FOR EOTECH 500 SERIES Ref Fabricante: GGG-1190813157000676 Cam operado desconexión rápida palanca con un dedo extra grande lazo reemplaza existente Tuerca Tornillo de montaje de EOTech para rápida instalación y remoción. No cambia la altura de montaje de EOTech y permite Co testificación con monumentos de hierro.
154.9EUR2154,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Acabado: BlackAltura: .276''Estilo: Quick DetachHacer: Universal RiflesNumero de bases: 1-Piece
Acabado:
Black
Altura:
.276''
Estilo:
Quick Detach
Hacer:
Universal Rifles
Numero de bases:
1-Piece
Peso de entrega: 0,068kgAltura de envío: 10mmAncho de envío: 43mmLongitud de envío: 122mm
UPC
: 813157000676
Cam operated quick-detach lever with an extra large finger loop replaces existing thumbnut mounting screw on EOTech for rapid installaton and removal. Does not change the mounting height of EOTech and allows co-witnessing with iron sights.
SPECS: 4140 steel, matte black. 500 Series - 25⁄8" (6.7cm) long x 13⁄32" (1cm) wide. Fits EOTech models 511, 512, 551, and 552. XPS Series - 3" (7.6cm) long x 9⁄16" (1.4cm) wide. Fits EOTech XPS2 and XPS3 sights.
Más...
Rock Solid, palanca de desconexión rápida
Cam operado desconexión rápida palanca con un dedo extra grande lazo reemplaza existente Tuerca Tornillo de montaje de EOTech para rápida instalación y remoción. No cambia la altura de montaje de EOTech y permite Co testificación con monumentos de hierro.
Especificaciones: acero 4140, negro mate. 500 serie - 25 ⁄ 8"(6,7 cm) largo x 13 ⁄ 32" (1 cm) de ancho. Se adapta a modelos de EOTech 511, 512, 551 y 552. Serie XPS - 3"(7,6 cm) de largo x 9 ⁄ 16" (1,4 cm) de ancho. Se adapta a lugares EOTech XPS2 y XPS3.
Más...
Evaluaciones de clientes para GG&G ACCUCAM LEVER FOR EOTECH 500 SERIES
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 5
Excellent, this is a must have(02/07/2010)
uses include 3 gun, hunting, general range sighting in etc. This piece is a must have for your optic as you can take it off with a throw of the lever to go open sights if necessary. This piece is expertly machined and never once have I had to make any adjustments to anything, throwing it back on and that takes only seconds...not once out of dozens of times. Installation is a snap. No cons on this piece of equipment.
Also works with the 512(23/07/2010)
I currently own two of these. One for my 552, and one for my 512. No need to un-tighten and re-tighten the thumbscrew when you wish to remove the holo, just pull on the lever, and it's off. No need to remove your gloves when it's cold. (I'm from Canada - I know what I'm talking about!) When re-mounted, it zero's immediately.
Excellent product and extremely well made. Worth every penny!
Great piece of gear!(23/07/2015)
I have always been a fan of GG and G. This lever is why. I bought my first one in 2005 for a personally owned eotech, and another in 2007 for my issued ACOG. I use them on duty, and both have been on multiple deployments. The finish is worn off them from rubbing on my kit for ten years, but they haven't rusted and still hold zero. As long as you return the optic to the same slot and apply forward pressure on the optic as you close the lever, you will not have a zero shift. I swap between my EOTech and ACOG as needed and remove them for cleaning with complete confidence.
They don't protrude excessively and the loop is plenty big enough to stick your gloved finger into. Removal is very quick (important when your ACOG hangs over your back up rear sight preventing it from opening). I have tried those little levers from ARMS and Larue and they are much harder to manipulate. It's clamping force is adjustable, just be careful as over tightening it can damage your receiver's rail. I took a chunk out of a rail on one of my issued rifles once...
We AR guys spend a lot of money on gimmicks that just wind up in the parts bin. I am an infantryman and my gear takes a beating. I have also attached just about everything you can to a rifle. I have learned that many widgets either don't work, aren't worth the weight/get in the way, or aren't tough enough to haul around all day everyday. These levers work, weigh nothing, and have survived everything I have put them through. If you need them, they are a fantastic product. I have been eyeballing a shiny new EOTech. If I buy it, this will definitely be purchased with it.