Rubber-Coated Surface Provides Maximum Control In Adverse Environments
Same contours and hard-molded polymer construction as the original MOE Grip. Durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.The MOE+ Grip has the addition of an anti-slip overmolded rubber coating for enhanced weapon control in wet conditions or when hand is sweaty. A polymer cap storage secures small items inside the internal compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately).
SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, and Foliage Green. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.
Más...
Superficie Recubierta de Goma Ofrece Máximo Control en Entornos Adversos
Contornos idénticos y construcción de polímero moldeado duro como el original MOE Grip. Empuñadura de pistola de reemplazo duradera, económica y fácil de instalar que ofrece al tirador un agarre sólido y seguro. Construcción de una sola pieza rígida y completamente soportada del mismo polímero reforzado de alto impacto que el grip MIAD, con textura rugosa en los lados y ranuras horizontales profundas en la correa frontal y trasera. La cola de castor curvada similar al inserto B2 de MIAD llena la unión entre el grip y el receptor para ayudarte a mantener un agarre cómodo y proteger la tela de tu mano durante disparos sostenidos. El MOE+ Grip tiene la adición de un revestimiento de goma antideslizante sobre moldeado para un control mejorado del arma en condiciones húmedas o cuando la mano está sudorosa. Una tapa de polímero asegura objetos pequeños dentro del compartimento interno, y el MOE+ acepta núcleos de grip Magpul MIAD (se venden por separado).
ESPECIFICACIONES: Polímero moldeado reforzado, disponible en Negro, Tierra Oscura, Verde O.D. y Verde Follaje. Compatible con receptores inferiores estándar mil-spec AR-15/M16. También se adapta a la mayoría de rifles estilo AR .308 que aceptan empuñaduras AR-15/M16. Incluye hardware de montaje.
Más...
Evaluaciones de clientes para MAGPUL MOE+ GRIP POLYMER FOR AR15/M4 ODG
Número de evaluaciones: 19
De brownells.com: 19
Evaluación media: 4,3
Great texture(24/04/2014)
Finally, the new Gray line. I replaced my FDE Hogue grip on my Smith and Wesson M&P with this one and love it. Fits true to the gun and looks great.
Great grip(28/11/2016)
I've had several brands and models of grips on my AR. But this is the best of the lot. I really like the rubber coating on the grip, If you want to upgrade your AR grips, I highly recommend this one.
grade A++++++++++(24/12/2011)
a very good oem replacement good ergonomics and storage in the center of the grip
Great design features(27/03/2012)
Has all the design ergonomics, features and good looks of the original MOE grip but with a rubberized exterior lining. I do like the cushiony feeling of the rubber exterior but it is somewhat slippery being non textured. I would have preferred a peebled surface to improve the grip feel. It is still a very good grip overall.
Magpul MOE+ Pistol Grip(28/08/2012)
This grip is by far better than holding onto the hard plastic type supplied with a LPK. It seems to be very sturdy and well made. Only problem I have with it, is the suppled screw. It did not tighten. I noticed it was shorter than the screw supplied with the LPK I purchased. Ended up using the screw and lockwasher supplied with the LPK. Now, the grip is on nice and tight. Thought it was just this one time problem, but a friend asked to put a MOE+ on his AR and we had the same problem with the screw (2 different lowers). This is is still a nice grip and I will get another.
best magpul grip yet(11/01/2013)
affordable and well built, very comfortable highly recommend this to those who like hogue grips. this is hard durable grip with a covering of rubber
Nice grip(10/08/2013)
I installed it on a mega arms billet lower. The finish is nice and clean. The grip + has a better feel then the regular moe. The only issue that I have is that there is small gaps between the trigger guard and also in the rear. It still has a overall nice and tight fit. I will purchase another for my next build.
Good grip(08/12/2013)
I recently put a CQD sling mount on my rifle and found my CAA G27 grip would no longer fit properly due to the beavertail extending to the end of the back plate. so I bought this as its replacement. Its a good grip ovarall and i like the feel. On the downside the storage compartment door can be a pain to open and their is a 1/8" gap between the beavertail and lower reciever.
Disappointed(06/12/2011)
I don't like it. The front and back of the MOE+ are kinda squishy so I find myself gripping it just a bit harder to keep control of the rifle. Problem is that the MOE+ is also fairly smooth so the harder I grip, the more the heel of my hand slips off of the backstrap. I've got an assortment of MIAD and plain MOE grips and maybe I'm just used to the hard plastic, but I just can't get comfortable with the MOE+. I tried the MOE+ on a 10.5" SBR and a 16" carbine.
Great choice,(10/12/2011)
I was up in the air between this and the K grip for my 300 black SBR. I chose the + as It was replacing a standard moe grip and the k grip was just too small for my hands. Hands down this thing feels better in my hand than the standard moe. I dont see why anyone would have problems with this at all. It is one of the least squishy rubber grips on the market having very little ruber over a plastic base, it is really the perfect feel. It is slightly tacky so it grips well with gloves or just your hands. I just don't understand how someone could give this a bad review unless they worked for troy or one of the other grip makers. This grip will go on all of my AR-15s period.
Great Choice(07/05/2012)
My preference is still the Magpul MIAD, but this is a very similar grip for a much lower price. Reminds me of my 1911 grip. Good choice!
MOE + Grip(16/11/2012)
This fits great in my hand. Not to squishy and not to firm. The bottom cover takes some time to remove, but several times of opening and closing makes one getting used to it. I like the idea of extra storage(ear plugs).
quality has gone down(28/08/2013)
Ordered my second grip and it does not fit nearly as good as the one I bought over a year ago, I don't know if Magpul QC is going down to meet higher demands for it's products or I just got a lemon.
favorite grip so far(28/11/2013)
I am not a professional, but have built several ar-15 rifles and ar pistols and this grip has a feel like none other. The grip has a softness that allows the shooter to maintain a firm grip - even in wet conditions. The storage options are another nice feature of all the magpul grips.
New Favorite(01/12/2013)
Much better grip & "feeling" than regular grip. I've upgraded my go to guns with this grip.
MOE+ (03/09/2014)
The non slip texture feels great and the ergonomics of the grip angle keep the hand and trigger finger in the correct position for multiple shootings position. I have used several other grips, including the Hogue finger groove and found it to be a bit small. This over the K because it just feels a bit bigger.
nice product!(28/07/2015)
I love this grip! feels much better then the stock grip that came with my AR... only downside is that it is a little hard to get the storage compartment open, not sure if it is just mine or if that is a common problem.
Great Grip(23/11/2015)
I purchased this grip for a 308 build. i am using Aero Precision receivers ( DPMS LR308 spec), and this grip fit perfectly. I have large hands, and this grip fills my hand. I really like the rubber feel of this grip, it gives great control. The compartment in the base is a nice addition. Another great product from Magpul!!
Pistol grip(28/05/2017)
I got this for a 300blackout Sitka Deer hunting gun (think Southeast Alaska wet and rainy), but after a little use I decided to put it on a pistol build and that's where it stayed. I'm not really a hogue grip kinda guy (had one and got rid of it) but this is somewhere in between the hogue rubber duckie feel and a hard plastic feel, great for the pistol though.
N.º de producto: 100007572 MAGPUL MOE+ GRIP POLYMER FOR AR15/M4 ODG Ref Fabricante: MAG416-ODG873750000732 Contornos idénticos y construcción de polímero moldeado duro como el original MOE Grip. Empuñadura de pistola de reemplazo duradera, económica y fácil de instalar que ofrece al tirador un agarre sólido y seguro. Construcción de una sola pieza rígida y completamente soportada del mismo polímero reforzado de alto impacto que el grip MIAD, con textura rugosa en los lados y ranuras horizontales profundas en la correa frontal y trasera. La cola de castor curvada similar al inserto B2 de MIAD llena la unión entre el grip y el receptor para ayudarte a mantener un agarre cómodo y proteger la tela de tu mano durante disparos sostenidos. El MOE+ Grip tiene la adición de un revestimiento de goma antideslizante sobre moldeado para un control mejorado del arma en condiciones húmedas o cuando la mano está sudorosa. Una tapa de polímero asegura objetos pequeños dentro del compartimento interno, y el MOE+ acepta núcleos de grip Magpul MIAD (se venden por separado).
Empuñadura de reemplazo duradera y económica con construcción de polímero reforzado de alto impacto y textura rugosa para un agarre seguro.
Incluye revestimiento de goma antideslizante para un mejor control en condiciones húmedas o cuando la mano está sudorosa.
Compatible con receptores inferiores estándar mil-spec AR-15/M16 y la mayoría de rifles estilo AR .308; incluye hardware de montaje.
Atributos
Color:
O.D. Green
Hacer:
AR-15
Material:
Polymer
Peso de entrega: 0,122kgAltura de envío: 38mmAncho de envío: 76mmLongitud de envío: 165mm
UPC
: 873750000732
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.y.1
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
New
N.º de producto: 100006786 MAGPUL MOE+ GRIP POLYMER FOR AR15/M4 BLACK Ref Fabricante: MAG416-BLK873750000718 Contornos idénticos y construcción de polímero moldeado duro como el original MOE Grip. Empuñadura de pistola de reemplazo duradera, económica y fácil de instalar que ofrece al tirador un agarre sólido y seguro. Construcción de una sola pieza rígida y completamente soportada del mismo polímero reforzado de alto impacto que el grip MIAD, con textura rugosa en los lados y ranuras horizontales profundas en la correa frontal y trasera. La cola de castor curvada similar al inserto B2 de MIAD llena la unión entre el grip y el receptor para ayudarte a mantener un agarre cómodo y proteger la tela de tu mano durante disparos sostenidos. El MOE+ Grip tiene la adición de un revestimiento de goma antideslizante sobre moldeado para un control mejorado del arma en condiciones húmedas o cuando la mano está sudorosa. Una tapa de polímero asegura objetos pequeños dentro del compartimento interno, y el MOE+ acepta núcleos de grip Magpul MIAD (se venden por separado).
35.9EUR14935,90 €
*
Plazo de entrega de aproximadamente 6-10 días. Más de 10 pcs. en el almacén de Europa
N.º de producto: 100007570 MAGPUL MOE+ GRIP POLYMER FOR AR15/M4 FDE Ref Fabricante: MAG416-FDE873750000725 Contornos idénticos y construcción de polímero moldeado duro como el original MOE Grip. Empuñadura de pistola de reemplazo duradera, económica y fácil de instalar que ofrece al tirador un agarre sólido y seguro. Construcción de una sola pieza rígida y completamente soportada del mismo polímero reforzado de alto impacto que el grip MIAD, con textura rugosa en los lados y ranuras horizontales profundas en la correa frontal y trasera. La cola de castor curvada similar al inserto B2 de MIAD llena la unión entre el grip y el receptor para ayudarte a mantener un agarre cómodo y proteger la tela de tu mano durante disparos sostenidos. El MOE+ Grip tiene la adición de un revestimiento de goma antideslizante sobre moldeado para un control mejorado del arma en condiciones húmedas o cuando la mano está sudorosa. Una tapa de polímero asegura objetos pequeños dentro del compartimento interno, y el MOE+ acepta núcleos de grip Magpul MIAD (se venden por separado).
35.9EUR8935,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Color: Dark EarthHacer: AR-15Material: Polymer
N.º de producto: 100014441 MAGPUL MOE+ GRIP POLYMER FOR AR15/M4 STEALTH GRAY Ref Fabricante: MAG416-GRY873750011752 Contornos idénticos y construcción de polímero moldeado duro como el original MOE Grip. Empuñadura de pistola de reemplazo duradera, económica y fácil de instalar que ofrece al tirador un agarre sólido y seguro. Construcción de una sola pieza rígida y completamente soportada del mismo polímero reforzado de alto impacto que el grip MIAD, con textura rugosa en los lados y ranuras horizontales profundas en la correa frontal y trasera. La cola de castor curvada similar al inserto B2 de MIAD llena la unión entre el grip y el receptor para ayudarte a mantener un agarre cómodo y proteger la tela de tu mano durante disparos sostenidos. El MOE+ Grip tiene la adición de un revestimiento de goma antideslizante sobre moldeado para un control mejorado del arma en condiciones húmedas o cuando la mano está sudorosa. Una tapa de polímero asegura objetos pequeños dentro del compartimento interno, y el MOE+ acepta núcleos de grip Magpul MIAD (se venden por separado).
Rubber-Coated Surface Provides Maximum Control In Adverse Environments
Same contours and hard-molded polymer construction as the original MOE Grip. Durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.The MOE+ Grip has the addition of an anti-slip overmolded rubber coating for enhanced weapon control in wet conditions or when hand is sweaty. A polymer cap storage secures small items inside the internal compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately).
SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, and Foliage Green. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.
Más...
Superficie Recubierta de Goma Ofrece Máximo Control en Entornos Adversos
Contornos idénticos y construcción de polímero moldeado duro como el original MOE Grip. Empuñadura de pistola de reemplazo duradera, económica y fácil de instalar que ofrece al tirador un agarre sólido y seguro. Construcción de una sola pieza rígida y completamente soportada del mismo polímero reforzado de alto impacto que el grip MIAD, con textura rugosa en los lados y ranuras horizontales profundas en la correa frontal y trasera. La cola de castor curvada similar al inserto B2 de MIAD llena la unión entre el grip y el receptor para ayudarte a mantener un agarre cómodo y proteger la tela de tu mano durante disparos sostenidos. El MOE+ Grip tiene la adición de un revestimiento de goma antideslizante sobre moldeado para un control mejorado del arma en condiciones húmedas o cuando la mano está sudorosa. Una tapa de polímero asegura objetos pequeños dentro del compartimento interno, y el MOE+ acepta núcleos de grip Magpul MIAD (se venden por separado).
ESPECIFICACIONES: Polímero moldeado reforzado, disponible en Negro, Tierra Oscura, Verde O.D. y Verde Follaje. Compatible con receptores inferiores estándar mil-spec AR-15/M16. También se adapta a la mayoría de rifles estilo AR .308 que aceptan empuñaduras AR-15/M16. Incluye hardware de montaje.
Más...
Evaluaciones de clientes para MAGPUL MOE+ GRIP POLYMER FOR AR15/M4 ODG
Número de evaluaciones: 19
De brownells.com: 19
Evaluación media: 4,3
Great texture(24/04/2014)
Finally, the new Gray line. I replaced my FDE Hogue grip on my Smith and Wesson M&P with this one and love it. Fits true to the gun and looks great.
Great grip(28/11/2016)
I've had several brands and models of grips on my AR. But this is the best of the lot. I really like the rubber coating on the grip, If you want to upgrade your AR grips, I highly recommend this one.
grade A++++++++++(24/12/2011)
a very good oem replacement good ergonomics and storage in the center of the grip
Great design features(27/03/2012)
Has all the design ergonomics, features and good looks of the original MOE grip but with a rubberized exterior lining. I do like the cushiony feeling of the rubber exterior but it is somewhat slippery being non textured. I would have preferred a peebled surface to improve the grip feel. It is still a very good grip overall.
Magpul MOE+ Pistol Grip(28/08/2012)
This grip is by far better than holding onto the hard plastic type supplied with a LPK. It seems to be very sturdy and well made. Only problem I have with it, is the suppled screw. It did not tighten. I noticed it was shorter than the screw supplied with the LPK I purchased. Ended up using the screw and lockwasher supplied with the LPK. Now, the grip is on nice and tight. Thought it was just this one time problem, but a friend asked to put a MOE+ on his AR and we had the same problem with the screw (2 different lowers). This is is still a nice grip and I will get another.
best magpul grip yet(11/01/2013)
affordable and well built, very comfortable highly recommend this to those who like hogue grips. this is hard durable grip with a covering of rubber
Nice grip(10/08/2013)
I installed it on a mega arms billet lower. The finish is nice and clean. The grip + has a better feel then the regular moe. The only issue that I have is that there is small gaps between the trigger guard and also in the rear. It still has a overall nice and tight fit. I will purchase another for my next build.
Good grip(08/12/2013)
I recently put a CQD sling mount on my rifle and found my CAA G27 grip would no longer fit properly due to the beavertail extending to the end of the back plate. so I bought this as its replacement. Its a good grip ovarall and i like the feel. On the downside the storage compartment door can be a pain to open and their is a 1/8" gap between the beavertail and lower reciever.
Disappointed(06/12/2011)
I don't like it. The front and back of the MOE+ are kinda squishy so I find myself gripping it just a bit harder to keep control of the rifle. Problem is that the MOE+ is also fairly smooth so the harder I grip, the more the heel of my hand slips off of the backstrap. I've got an assortment of MIAD and plain MOE grips and maybe I'm just used to the hard plastic, but I just can't get comfortable with the MOE+. I tried the MOE+ on a 10.5" SBR and a 16" carbine.
Great choice,(10/12/2011)
I was up in the air between this and the K grip for my 300 black SBR. I chose the + as It was replacing a standard moe grip and the k grip was just too small for my hands. Hands down this thing feels better in my hand than the standard moe. I dont see why anyone would have problems with this at all. It is one of the least squishy rubber grips on the market having very little ruber over a plastic base, it is really the perfect feel. It is slightly tacky so it grips well with gloves or just your hands. I just don't understand how someone could give this a bad review unless they worked for troy or one of the other grip makers. This grip will go on all of my AR-15s period.
Great Choice(07/05/2012)
My preference is still the Magpul MIAD, but this is a very similar grip for a much lower price. Reminds me of my 1911 grip. Good choice!
MOE + Grip(16/11/2012)
This fits great in my hand. Not to squishy and not to firm. The bottom cover takes some time to remove, but several times of opening and closing makes one getting used to it. I like the idea of extra storage(ear plugs).
quality has gone down(28/08/2013)
Ordered my second grip and it does not fit nearly as good as the one I bought over a year ago, I don't know if Magpul QC is going down to meet higher demands for it's products or I just got a lemon.
favorite grip so far(28/11/2013)
I am not a professional, but have built several ar-15 rifles and ar pistols and this grip has a feel like none other. The grip has a softness that allows the shooter to maintain a firm grip - even in wet conditions. The storage options are another nice feature of all the magpul grips.
New Favorite(01/12/2013)
Much better grip & "feeling" than regular grip. I've upgraded my go to guns with this grip.
MOE+ (03/09/2014)
The non slip texture feels great and the ergonomics of the grip angle keep the hand and trigger finger in the correct position for multiple shootings position. I have used several other grips, including the Hogue finger groove and found it to be a bit small. This over the K because it just feels a bit bigger.
nice product!(28/07/2015)
I love this grip! feels much better then the stock grip that came with my AR... only downside is that it is a little hard to get the storage compartment open, not sure if it is just mine or if that is a common problem.
Great Grip(23/11/2015)
I purchased this grip for a 308 build. i am using Aero Precision receivers ( DPMS LR308 spec), and this grip fit perfectly. I have large hands, and this grip fills my hand. I really like the rubber feel of this grip, it gives great control. The compartment in the base is a nice addition. Another great product from Magpul!!
Pistol grip(28/05/2017)
I got this for a 300blackout Sitka Deer hunting gun (think Southeast Alaska wet and rainy), but after a little use I decided to put it on a pistol build and that's where it stayed. I'm not really a hogue grip kinda guy (had one and got rid of it) but this is somewhere in between the hogue rubber duckie feel and a hard plastic feel, great for the pistol though.