Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

MAGPUL
AR-15/16 PMAG RANGER® FLOORPLATE 3 PACK

873750001906 100003501

Fast, Easy Mag Changes In High Stress Situations

Replacement floorplate brings the speed and controllability of the original Magpul Ranger Floorplate to both 20- and 30-round PMAGs for fast, secure tactical magazine changes. Smoothly contoured, easy-to-grasp finger loop and grooved thumb dimple aid in positive extraction from tight mag pouches and help you hang onto the empty magazine with just a finger after a tactical reload. Made from tough, reinforced polymer overmolded with soft, non-slip synthetic rubber that also cushions the magazine from impact if dropped on a hard surface. Includes molded-in para-cord hole for custom loop configurations. Easy, drop-in installation: remove the PMAG’s factory floorplate as you do for cleaning, and replace it with the Ranger Floorplate. Sold in 3-paks and available in Black. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

Más...

Cambios de cargador rápidos y fáciles en situaciones de alto estrés

La base de reemplazo ofrece la velocidad y controlabilidad de la base original Magpul Ranger a los PMAGs de 20 y 30 rondas para cambios de cargador tácticos rápidos y seguros. El lazo para el dedo de contorno suave y fácil de agarrar, junto con el hueco estriado para el pulgar, ayudan en la extracción positiva de bolsillos de cargador ajustados y permiten mantener el cargador vacío con solo un dedo después de una recarga táctica. Hecho de polímero reforzado resistente, revestido con goma sintética antideslizante y suave que también protege el cargador de impactos si se cae sobre una superficie dura. Incluye un orificio moldeado para cordón de paracaídas para configuraciones de lazo personalizadas. Instalación fácil y rápida: retire la base de fábrica del PMAG como lo hace para la limpieza, y reemplácela con la base Ranger. Se vende en paquetes de 3 y está disponible en color negro. Mag212 se ajusta al PMAG original y M2, NO a los PMAGS GEN 3 de 556.

ESPECIFICACIONES: Polímero reforzado, revestido de goma. 3 por paquete. Mag212 se ajusta al PMAG original y M2, NO a los PMAGS GEN 3 de 556.

Más...

Evaluaciones de clientes para MAGPUL RANGER PLATE 5.56X45MM FOR PMAG 30RD AR-15 MAGAZINE BLK 3/PK

Número de evaluaciones: 14
De brownells.com: 14
Evaluación media: 4,8

Typical MAGPUL Quality (14/01/2010)

Easy to install and gives you a little something extra to grab

Easy access (09/12/2009)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (01/12/2012)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (09/09/2017)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (11/09/2009)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (02/10/2009)

The Magpul PMAG Ranger plates are a quick an effective solution for not only protecting your mags but also making them more effective. The angle on the bottom of the Ranger plate puts you at nearly the perfect angle for shooting while proned out on the ground. The loop also increases speed of mag exchanges and makes ripping the mag much smoother. I use them on all of my mags!

Should be standard equipment (17/11/2009)

With this on a mag that extends below the grip, you almost don't need a bipod or monopod for support-- works great for that reason alone.

Magpul Plates (06/12/2010)

These worked great. Easy to install.

saves your mag if you drop em a lot (08/08/2011)

gives you a little extra grip and a nice bumper if you drop a loaded mag on the concrete

Quite goood (27/05/2013)

Fits DPMS P-mags. Installation takes 1/2 minute. Protects your mags when dropping it on concrete floor.

Its a great (29/01/2016)

These fit perfectly on the Gen 3 magazines. It actually takes 5 seconds to remove floor plate and install the Ranger plate (unless you let the spring escape). My shooting days with the M16 goes back to the late 1960's and continue thru the present. The MagPul Gen3 with Ranger plate is great.

Correction (13/07/2016)

This is the correct floor plate for the Gen 2 PMAG and won't fit on the Gen 3 Magazine. (Model # MAG561 is the Gen 3 PMAG plate.) It takes all of 5 seconds (unless you let the spring escape) to remove the original plate and install this one. In addition to all the speed elements, this allows for effortless removal of magazines from tightly packed pouches of all types. It is well worth it to equip all your Gen 2 PMAGs with this plate.

Awesome Product (24/09/2017)

These Ranger Floorplates make it easy to grab and change magazines if you're wearing body armor or a plate carrier. Perfect fit and very functional!

DO NOT WORK W/10 RD PMAGS (03/03/2018)

Itâs a good solid product, but I bought these for some 10 round hunting mags and they donât fit. They work just fine on my 30 and 40 round mags. The way the 10 rounders are molded at the rail for the base plate doesnât line up with the Rangers and the way theyâre molded at the rail. I didnât see anywhere clearly stating they would not work with 10 round Pmags, and these are the 3rd Gen mags too. If I missed it, my fault, but it is certainly not clearly stated anywhere obvious. For that reason this product gets 4/5 stars. If youâre buying them for bigger mags, you should consider this a 5/5.

Disappointed and considering returning them as they arenât working out for what I wanted them for, but Iâll probably just put them on some 40 round mags.

Leer 14 mas calificaciones en brownells.com

34.9 34.9 1 EUR

New

N.º de producto: 100003501
MAGPUL RANGER PLATE 5.56X45MM FOR PMAG 30RD AR-15 MAGAZINE BLK 3/PK
Ref Fabricante: MAG212-BLK 873750001906 La base de reemplazo ofrece la velocidad y controlabilidad de la base original Magpul Ranger a los PMAGs de 20 y 30 rondas para cambios de cargador tácticos rápidos y seguros. El lazo para el dedo de contorno suave y fácil de agarrar, junto con el hueco estriado para el pulgar, ayudan en la extracción positiva de bolsillos de cargador ajustados y permiten mantener el cargador vacío con solo un dedo después de una recarga táctica. Hecho de polímero reforzado resistente, revestido con goma sintética antideslizante y suave que también protege el cargador de impactos si se cae sobre una superficie dura. Incluye un orificio moldeado para cordón de paracaídas para configuraciones de lazo personalizadas. Instalación fácil y rápida: retire la base de fábrica del PMAG como lo hace para la limpieza, y reemplácela con la base Ranger. Se vende en paquetes de 3 y está disponible en color negro. Mag212 se ajusta al PMAG original y M2, NO a los PMAGS GEN 3 de 556.

34.9 EUR 35 34,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Hacer: AR-15

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

La base de reemplazo ofrece velocidad y controlabilidad para cambios de cargador tácticos rápidos y seguros en PMAGs de 20 y 30 rondas.
Hecho de polímero reforzado con revestimiento de goma antideslizante, protege el cargador de impactos y facilita la extracción de bolsillos ajustados.
Incluye un orificio moldeado para cordón de paracaídas y se vende en paquetes de 3; compatible con PMAG original y M2, no con PMAGS GEN 3 de 556.

Atributos

Color: Black Hacer: AR-15 Peso de entrega: 0,077kg Altura de envío: 32mm Ancho de envío: 140mm Longitud de envío: 210mm UPC : 873750001906

Detalles del artículo

Hecho en USA

Mejora tu AR-15 con el PMAG RANGER® FLOORPLATE. 🛠️ Cambios rápidos y seguros en 3 paquetes. ¡Consigue el tuyo ahora!

Fast, Easy Mag Changes In High Stress Situations

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

Más...

Cambios de cargador rápidos y fáciles en situaciones de alto estrés

ESPECIFICACIONES: Polímero reforzado, revestido de goma. 3 por paquete. Mag212 se ajusta al PMAG original y M2, NO a los PMAGS GEN 3 de 556.

Más...

Evaluaciones de clientes para MAGPUL RANGER PLATE 5.56X45MM FOR PMAG 30RD AR-15 MAGAZINE BLK 3/PK

Número de evaluaciones: 14
De brownells.com: 14
Evaluación media: 4,8

Typical MAGPUL Quality (14/01/2010)

Easy to install and gives you a little something extra to grab

Easy access (09/12/2009)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (01/12/2012)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (09/09/2017)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (11/09/2009)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (02/10/2009)