Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

SADLAK INDUSTRIES
AR-15/M16 GAS BLOCKS

100008732

Minimal Profile to Fit Under Handguard Or With Integral Accessory Rail

All of SADLAK’s Gas Blocks are made in the USA by craftsmen with years of experience delivering consistent quality. All the bores are precision honed and all critical measurements are 100% inspected to insure consistency and quality. Available in a multitude of sizes and styles, Sadlak’s Gas Blocks are a great option if you are building an AR or if you are just looking to upgrade. The Gas Blocks are available in .625”, .750”, .875”, or .936”. They also feature option such as Clamp-Style, Slip-On, Skeletonized, or Adjustable, and all attaching hardware is included. All Gas Blocks except for the Picatinny Rail Gas Block are Low-Profile. Finishes include Black Nitride or Manganese Phosphate. The Sadlak Gas Blocks Mounts securely to barrel with included setscrews. Clamp-on models squeeze around the barrel as you tighten the side-mounted setscrews. Slip-on models are anchored by setscrews on the underside. Low Profile fits under a free-float handguard and lets you use a longer on carbine-length barrels for a clean, streamlined look with more gripping surface. Extended Nose is like Low-Profile, but with an extended sleeve that covers taper pin holes left by the issue A2-style sight tower.

SPECS: 6061 T6 aluminum, hardcoat anodized, black, or 1018 alloy steel, Parkerized, black. Barrel O.D. measured at gas port.

SKU	BBL. DIA.	LENGTH	WIDTH	HEIGHT	WEIGHT
100-006-899	.625"	.95" (24mm)	.775" (20mm)	1.3" (33mm)	1.4oz (40g)
100-005-337	.750"	.95" (24mm)	.90" (23mm)	1.4" (36mm)	1.4oz (40g)
100-005-339	.750"	.95" (24mm)	.90" (23mm)	1.5" (38mm)	1.8oz (51g)
100-008-732	.750"	1.85" (47mm)	.90" (23mm)	1.4" (36mm)	1.9oz (54g)
100-006-900	.875"	.95" (24mm)	1.0" (26mm)	1.4" (36mm)	1.6oz (45g)
100-005-340	.936"	1.4" (36mm)	1.2" (30mm)	1.7" (43mm)	1.4oz (40g)

100-005-342	.936"	1.7" (43mm)	1.2" (30mm)	1.7" (43mm)	2.6oz (74g)

Más...

Perfil Mínimo para Ajustar Debajo del Guardamanos o con Riel de Accesorios Integral

Todos los Gas Blocks de SADLAK están fabricados en EE.UU. por artesanos con años de experiencia, entregando una calidad constante. Todos los orificios están precisamente bruñidos y todas las medidas críticas son inspeccionadas al 100% para asegurar la consistencia y calidad. Disponibles en una multitud de tamaños y estilos, los Gas Blocks de Sadlak son una excelente opción si estás construyendo un AR o si simplemente buscas mejorar. Los Gas Blocks están disponibles en .625”, .750”, .875”, o .936”. También ofrecen opciones como de Estilo Abrazadera, Deslizante, Esqueletizado o Ajustable, e incluyen todo el hardware de montaje. Todos los Gas Blocks, excepto el Gas Block con Rail Picatinny, son de Perfil Bajo. Los acabados incluyen Nitruro Negro o Fosfato de Manganeso. Los Gas Blocks de Sadlak se montan de manera segura al cañón con tornillos de ajuste incluidos. Los modelos de abrazadera se cierran alrededor del cañón a medida que aprietas los tornillos de ajuste laterales. Los modelos deslizantes están anclados por tornillos de ajuste en la parte inferior. Perfil Bajo se ajusta debajo de una guardamanos flotante y permite usar un guardamanos más largo en cañones de longitud de carabina para un aspecto limpio y aerodinámico con más superficie de agarre. Nariz Extendida es como el Perfil Bajo, pero con una manga extendida que cubre los agujeros de los pasadores cónicos dejados por la torreta de mira estilo A2 de serie.

ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro, o acero aleado 1018, Pavonado, negro. Diámetro exterior del cañón medido en el puerto de gas.

SKU	DIA. DEL CAÑÓN	LARGO	ANCHO	ALTO	PESO
100-006-899	.625"	.95" (24mm)	.775" (20mm)	1.3" (33mm)	1.4oz (40g)
100-005-337	.750"	.95" (24mm)	.90" (23mm)	1.4" (36mm)	1.4oz (40g)
100-005-339	.750"	.95" (24mm)	.90" (23mm)	1.5" (38mm)	1.8oz (51g)
100-008-732	.750"	1.85" (47mm)	.90" (23mm)	1.4" (36mm)	1.9oz (54g)
100-006-900	.875"	.95" (24mm)	1.0" (26mm)	1.4" (36mm)	1.6oz (45g)
100-005-340	.936"	1.4" (36mm)	1.2" (30mm)	1.7" (43mm)	1.4oz (40g)

100-005-342	.936"	1.7" (43mm)	1.2" (30mm)	1.7" (43mm)	2.6oz (74g)

Más...

Evaluaciones de clientes para SADLAK INDUSTRIES EXTENDED NOSE, STEEL

Número de evaluaciones: 21
De brownells.com: 21
Evaluación media: 3,3

Excellent Part (06/07/2014)

Fit and finish were excellent. Dimensional tolerances were exact. Installation was simple with perfect alignment of gas tube / roll pin and perfect barrel fit. A quality part that will go on future builds.

Great replacement for front sight tower (14/05/2015)

Fits perfectly and completely covers notches machined into barrel for the sight tower taper pins. Looks great on Stainless barrel, too.

Fits like a glove (24/11/2015)

This item fits like a glove and is high quality. Installed on a SW Midlength melonite 5R barrel. Snug perfect fit. Covers 100% of surface that the regular sight tower once covered leaving no unfinished metal. Gas roll pin hole is tight.

Quality Gas Block! (23/04/2015)

Been using Sadlak Low Pro gas blocks for a long time, so when I needed one for the .625 profile, this was the one I ordered. Fit was tight on my Brownells barrel, so it needed a bit of fitting to get the perfect fit. About 5 minutes of sanding and test fitting and it was good to go!

1 to 2 thousandths off (04/10/2016)

Gas block would not fit on my barrel. I had a machinist measure and it was 2 thousandths off. It won't fit. I should have gone with a clamp on I guess.

peace of junk (26/05/2015)

it looks good but its a peace of junk. bought this to put on a 50 Beo Wulf and it want even start on the gas block fit on the barrel.my Barrel is right on.875 and the ID of this gas block is .870 that is very poor QC in my book.this thing is good for nothing. maybe a paper weight.but it ant heavy enough for that.

Sending it back to them.!!!!!

Excellent Fit (14/12/2015)

While building a DPMS pattern .308, a local gun smith recommended SADLAK Industries when I told him I was having a bit of trouble finding a good gas block for a .875 barrel. I ordered the .875 ( GB-150 ) low profile and it fits perfectly. Now the package says .8753 > .8758 but I mic'd .8750 and my CRITERION BARRELS INC - 308 AR STAINLESS STEEL BARREL mic'd .8740. Seeing how a regular piece of printer paper is .0040 thick and grocery store receipt paper is .0020. This fit is .0010 or LESS. I'm sure the phosphate style finish accounts for a bit.

<img width="500" src='/userdocs/reviewimages/525d1214-9531-4235-85d8-758f9b010065.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/18b25b14-d53a-45c5-a6e8-10664488c962.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/7ab03931-ae8a-440d-ab89-2059d653d946.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/2578a3e2-882b-4608-a11d-0d1ad76a698d.jpg' alt=''>

Excellent product for low profile apps (12/05/2011)

Well machined, phosphate finish is solid. Fit over .750 barrel in an easy, but tight fit. Held in place by two set screws. Bought to place under a mid-free float Yankee Hill quad rail. Fit under handguard with good clearance. A solid low profile gas block for a reasonable price.

Another Great Gas Block From Sadlak LLC! (10/11/2012)

I specifically ordered this gas block to review for my blog fans and followers. Prior to ordering this gas block, I had already ordered two of Sadlak's Clamp-On style .750 low-pro gas blocks and use them on two of my rifles. When I started building my beater rifle, I decided to go with their simpler slip on low-pro gas block.

Since I was building a beater rifle, I did not care if the set screws marked or scratch my phosphate barrel. So I ordered the gas block and when it arrived, it was exactly as described. It had a very good finish and the machining appeared to be done very well. It came with two small Allen stylke set screws found at the bottom of the block.

It slipped effortlessly onto the barrel of my rifle, but was still tight enough that it fit very well. Once I got it lined up, I tightened the set screws and even added a little Blue Loc-Tite to make it extra secure. The roll pin hole lined up perfectly with my gas tube and the roll pin installed just as easy as the block itself.

After installing the gas block, I slipped on my Yankee Hill Diamond Series Free-Float Quad Rail. The gas block had plenty of clearance under the rail and gave it a very discreet look. You could barely notice the gas block once the rail was installed.

All in all, I was very satisfied with this gas block. I would have liked for the set screws to be a little more heavy duty, but they worked well. If you are looking for a gas block that will not take away from the look of your rifle, let me suggest this one. Another excellent product from Sadlak Industries LLC.!!!

-Michael Sapp

You get what you pay for (30/11/2012)

This gas block is cheap...that's the best thing about it. The downside is that the hole for the gas tube roll pin is off center from the hole for the tube itself. This makes it impossible to install the roll pin through the gas block, through the gas tube, and then through the other side of the gas block. I had to enlarge the hole to make the gas block useable. That is not a proper fix though, and the only reason I'm using the gas block at all is because it's installed on a range gun and not one that I intend to depend on.

Good design poor machining (18/04/2013)

Ordered this gas block for an AR build. When I received it it looked awesome and I couldn't wait to install. When I went to install the gas tube I found like a customer in another review the roll pin hole was off center on one side. This was very slightly off and just by looking you could not see it. Tried to remove the roll pin and ended up breaking one and bending two of the Brownells roll pin punches. If your going to purchase this check the alignment before installing the roll pin. Other than the roll pin issue fit and finish seem to be very good.

Don't judge a book by its cover (25/07/2013)

I gave this gas block a 5 star because, for the price you will not find anything better. Fit like a glove on my AR-Stoner barrel. The only little problem I had was once again Brownells shipped me a product missing the rowpin. Not a real problem I just used one from an old gas block that I had. Just really disapointed with Brownells QC.

Very disappointed with this product! (18/02/2014)

It wouldn't fit on my AR-Stoner barrel. I should have spent a little more and bought a YHM low profile gas glock instead.

Great product! (27/06/2014)

I have used many of these and each one was great. Nice fit, easy to install, looks good, and it works.

Decent (25/07/2014)

Sadlak makes some good quality parts, Unfortunately this gas block has some flaws. Like others have said the inner diameter is a few thousands of an inch too small. I don't think the engineers or machinest remembered to account for the buildup from the parkerizing. I had to take some red scotchbrite attached to a rod and chucked into a drill to quickly remove the coating before it slipped onto my bead blasted stainless barrel. If I had a coated barrel I'm not sure if it would even fit. I didn't have any issues with the roll pin hole however. The pin went on nice and easy. Overall I'll give it 4 starts because it worked for my application.

Won't fit. (13/09/2014)

Out of spec. only .745 inside diameter won't fit the brownells .750 barrel.

Does not fit (05/10/2016)

Does not fit. Previous reviews state this issue.

Not for AR 308 great for AR 15 (29/06/2012)

Solid steel

Favorite Gas Block!! Good Job Sadlak!! (10/11/2012)

I specifically ordered this gas block to use when I was building my VLTOR Short Barreled Rifle. I was looking for a low-profile gas block that clamped on versus screwing down onto the barrel.

The reason why is because my 7.5" Barrel was a match stainless barrel and I did not want to mark or scratch my barrel with Allen screws as are found on most low-pro gas blocks.

I have used several Sadlak Industries products, especially for my M1A Socom II. I have always loved the quality and high attention to detail offered by Sadlak LLC. So I decided to give it a shot and ordered it for my AR-15.

Once it arrived I couldn't have been happier and it was a lot heavier and beefier than I imagined it would be. The Allen screws were thick and a bit larger than normal screws found on gas blocks. I also loved the fact that the clamp style cut was done at an angel versus straight up and down.

As advertised, the low pro gas block fit easily on my barrel and was easy to install. It literally took me about 5 minutes to install. I did use a small bit of blue Loc-Tite when tightening the screws just for a little bit of re-assurance. After clamping the gas block on my barrel, it fit perfectly under my VLTOR CAS-V handguard and gave my rifle an awesome look.

This was my first experience with an AR-15 type product from Sadlak. I liked it so much that I ended up ordering another and using on one of my other rifles. This gas block now has well over 2k rounds through it with no issues, malfunctions and has not lost its grip with my barrel.

Overall I was very happy with this gas block and will continue to use Sadlak LLC.'s products for both my M1A's and my AR-15s. Get one, you will love it!

-Michael Sapp

my go-to block (13/08/2014)

I prefer clamp blocks when pinning is not convenient and while I really like the Geiselle pinable block this one is slimmer and causes less issues with skinny free float handguards. I have had zero issues with screws stripping and recommend this over any set screw block (which I would never use without dimpling)

Not impressed (25/05/2016)

Paid extra for two day shipping for this "low profile" block so I could finish my AR in time, but this clamp on style was to tall on the bottom and hit on my BCM KMR hand guard. VERY irritating paying extra to get it then paying to send it back for a part that was suppose to be low profile.

Leer 21 mas calificaciones en brownells.com

29.9 49.9 4 EUR

N.º de producto: 100008732
SADLAK INDUSTRIES EXTENDED NOSE, STEEL
Ref Fabricante: GB121 Todos los Gas Blocks de SADLAK están fabricados en EE.UU. por artesanos con años de experiencia, entregando una calidad constante. Todos los orificios están precisamente bruñidos y todas las medidas críticas son inspeccionadas al 100% para asegurar la consistencia y calidad. Disponibles en una multitud de tamaños y estilos, los Gas Blocks de Sadlak son una excelente opción si estás construyendo un AR o si simplemente buscas mejorar. Los Gas Blocks están disponibles en .625”, .750”, .875”, o .936”. También ofrecen opciones como de Estilo Abrazadera, Deslizante, Esqueletizado o Ajustable, e incluyen todo el hardware de montaje. Todos los Gas Blocks, excepto el Gas Block con Rail Picatinny, son de Perfil Bajo. Los acabados incluyen Nitruro Negro o Fosfato de Manganeso. Los Gas Blocks de Sadlak se montan de manera segura al cañón con tornillos de ajuste incluidos. Los modelos de abrazadera se cierran alrededor del cañón a medida que aprietas los tornillos de ajuste laterales. Los modelos deslizantes están anclados por tornillos de ajuste en la parte inferior. Perfil Bajo se ajusta debajo de una guardamanos flotante y permite usar un guardamanos más largo en cañones de longitud de carabina para un aspecto limpio y aerodinámico con más superficie de agarre. Nariz Extendida es como el Perfil Bajo, pero con una manga extendida que cubre los agujeros de los pasadores cónicos dejados por la torreta de mira estilo A2 de serie.

49.9 EUR 0 49,90 € *

Notificar sobre disponibilidad

No disponible.

Caracteristicas: Diametro interior: .750 Estilo: Low-Profile Hacer: AR-15 Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Los Gas Blocks de SADLAK están hechos en EE.UU. con inspección al 100% de todas las medidas críticas para garantizar calidad y consistencia.
Disponibles en varios tamaños (.625”, .750”, .875”, .936”) y estilos (Abrazadera, Deslizante, Esqueletizado, Ajustable), con acabados en Nitruro Negro o Fosfato de Manganeso.
El modelo de Nariz Extendida cubre los agujeros de los pasadores cónicos de la torreta de mira estilo A2, proporcionando un aspecto limpio y aerodinámico.

Atributos

Diametro interior: .750 Estilo: Low-Profile Hacer: AR-15 Material: Steel Peso de entrega: 0,068kg Altura de envío: 25mm Ancho de envío: 76mm Longitud de envío: 122mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

N.º de producto: 100005339
SADLAK INDUSTRIES LOW-PROFILE, CLAMP, STEEL
Ref Fabricante: GB-130 Todos los Gas Blocks de SADLAK están fabricados en EE.UU. por artesanos con años de experiencia, entregando una calidad constante. Todos los orificios están precisamente bruñidos y todas las medidas críticas son inspeccionadas al 100% para asegurar la consistencia y calidad. Disponibles en una multitud de tamaños y estilos, los Gas Blocks de Sadlak son una excelente opción si estás construyendo un AR o si simplemente buscas mejorar. Los Gas Blocks están disponibles en .625”, .750”, .875”, o .936”. También ofrecen opciones como de Estilo Abrazadera, Deslizante, Esqueletizado o Ajustable, e incluyen todo el hardware de montaje. Todos los Gas Blocks, excepto el Gas Block con Rail Picatinny, son de Perfil Bajo. Los acabados incluyen Nitruro Negro o Fosfato de Manganeso. Los Gas Blocks de Sadlak se montan de manera segura al cañón con tornillos de ajuste incluidos. Los modelos de abrazadera se cierran alrededor del cañón a medida que aprietas los tornillos de ajuste laterales. Los modelos deslizantes están anclados por tornillos de ajuste en la parte inferior. Perfil Bajo se ajusta debajo de una guardamanos flotante y permite usar un guardamanos más largo en cañones de longitud de carabina para un aspecto limpio y aerodinámico con más superficie de agarre. Nariz Extendida es como el Perfil Bajo, pero con una manga extendida que cubre los agujeros de los pasadores cónicos dejados por la torreta de mira estilo A2 de serie.

49.9 EUR 7 49,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Diametro interior: .750 Estilo: Low-Profile Hacer: AR-15 Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

N.º de producto: 100005337
SADLAK INDUSTRIES LOW-PROFILE, SLIP-ON, STEEL
Ref Fabricante: GB-100 Todos los Gas Blocks de SADLAK están fabricados en EE.UU. por artesanos con años de experiencia, entregando una calidad constante. Todos los orificios están precisamente bruñidos y todas las medidas críticas son inspeccionadas al 100% para asegurar la consistencia y calidad. Disponibles en una multitud de tamaños y estilos, los Gas Blocks de Sadlak son una excelente opción si estás construyendo un AR o si simplemente buscas mejorar. Los Gas Blocks están disponibles en .625”, .750”, .875”, o .936”. También ofrecen opciones como de Estilo Abrazadera, Deslizante, Esqueletizado o Ajustable, e incluyen todo el hardware de montaje. Todos los Gas Blocks, excepto el Gas Block con Rail Picatinny, son de Perfil Bajo. Los acabados incluyen Nitruro Negro o Fosfato de Manganeso. Los Gas Blocks de Sadlak se montan de manera segura al cañón con tornillos de ajuste incluidos. Los modelos de abrazadera se cierran alrededor del cañón a medida que aprietas los tornillos de ajuste laterales. Los modelos deslizantes están anclados por tornillos de ajuste en la parte inferior. Perfil Bajo se ajusta debajo de una guardamanos flotante y permite usar un guardamanos más largo en cañones de longitud de carabina para un aspecto limpio y aerodinámico con más superficie de agarre. Nariz Extendida es como el Perfil Bajo, pero con una manga extendida que cubre los agujeros de los pasadores cónicos dejados por la torreta de mira estilo A2 de serie.

33.9 EUR 18 33,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Diametro interior: .750 Estilo: Low-Profile Hacer: AR-15 Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

N.º de producto: 100006899
SADLAK INDUSTRIES LOW-PROFILE, .625" BORE DIA., STEEL
Ref Fabricante: GB060 Todos los Gas Blocks de SADLAK están fabricados en EE.UU. por artesanos con años de experiencia, entregando una calidad constante. Todos los orificios están precisamente bruñidos y todas las medidas críticas son inspeccionadas al 100% para asegurar la consistencia y calidad. Disponibles en una multitud de tamaños y estilos, los Gas Blocks de Sadlak son una excelente opción si estás construyendo un AR o si simplemente buscas mejorar. Los Gas Blocks están disponibles en .625”, .750”, .875”, o .936”. También ofrecen opciones como de Estilo Abrazadera, Deslizante, Esqueletizado o Ajustable, e incluyen todo el hardware de montaje. Todos los Gas Blocks, excepto el Gas Block con Rail Picatinny, son de Perfil Bajo. Los acabados incluyen Nitruro Negro o Fosfato de Manganeso. Los Gas Blocks de Sadlak se montan de manera segura al cañón con tornillos de ajuste incluidos. Los modelos de abrazadera se cierran alrededor del cañón a medida que aprietas los tornillos de ajuste laterales. Los modelos deslizantes están anclados por tornillos de ajuste en la parte inferior. Perfil Bajo se ajusta debajo de una guardamanos flotante y permite usar un guardamanos más largo en cañones de longitud de carabina para un aspecto limpio y aerodinámico con más superficie de agarre. Nariz Extendida es como el Perfil Bajo, pero con una manga extendida que cubre los agujeros de los pasadores cónicos dejados por la torreta de mira estilo A2 de serie.

29.9 EUR 9 29,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Diametro interior: .625 Estilo: Low-Profile Hacer: AR-15 Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Mejora tu AR-15 con los Gas Blocks de SADLAK. Calidad superior 🇺🇸 y múltiples opciones para un ajuste perfecto. ¡Descúbrelos!.

Minimal Profile to Fit Under Handguard Or With Integral Accessory Rail

SPECS: 6061 T6 aluminum, hardcoat anodized, black, or 1018 alloy steel, Parkerized, black. Barrel O.D. measured at gas port.

SKU	BBL. DIA.	LENGTH	WIDTH	HEIGHT	WEIGHT
100-006-899	.625"	.95" (24mm)	.775" (20mm)	1.3" (33mm)	1.4oz (40g)
100-005-337	.750"	.95" (24mm)	.90" (23mm)	1.4" (36mm)	1.4oz (40g)
100-005-339	.750"	.95" (24mm)	.90" (23mm)	1.5" (38mm)	1.8oz (51g)
100-008-732	.750"	1.85" (47mm)	.90" (23mm)	1.4" (36mm)	1.9oz (54g)
100-006-900	.875"	.95" (24mm)	1.0" (26mm)	1.4" (36mm)	1.6oz (45g)
100-005-340	.936"	1.4" (36mm)	1.2" (30mm)	1.7" (43mm)	1.4oz (40g)

100-005-342	.936"	1.7" (43mm)	1.2" (30mm)	1.7" (43mm)	2.6oz (74g)

Más...

Perfil Mínimo para Ajustar Debajo del Guardamanos o con Riel de Accesorios Integral

ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro, o acero aleado 1018, Pavonado, negro. Diámetro exterior del cañón medido en el puerto de gas.

SKU	DIA. DEL CAÑÓN	LARGO	ANCHO	ALTO	PESO
100-006-899	.625"	.95" (24mm)	.775" (20mm)	1.3" (33mm)	1.4oz (40g)
100-005-337	.750"	.95" (24mm)	.90" (23mm)	1.4" (36mm)	1.4oz (40g)
100-005-339	.750"	.95" (24mm)	.90" (23mm)	1.5" (38mm)	1.8oz (51g)
100-008-732	.750"	1.85" (47mm)	.90" (23mm)	1.4" (36mm)	1.9oz (54g)
100-006-900	.875"	.95" (24mm)	1.0" (26mm)	1.4" (36mm)	1.6oz (45g)
100-005-340	.936"	1.4" (36mm)	1.2" (30mm)	1.7" (43mm)	1.4oz (40g)

100-005-342	.936"	1.7" (43mm)	1.2" (30mm)	1.7" (43mm)	2.6oz (74g)

Más...

Evaluaciones de clientes para SADLAK INDUSTRIES EXTENDED NOSE, STEEL

Número de evaluaciones: 21
De brownells.com: 21
Evaluación media: 3,3

Excellent Part (06/07/2014)

Great replacement for front sight tower (14/05/2015)

Fits perfectly and completely covers notches machined into barrel for the sight tower taper pins. Looks great on Stainless barrel, too.

Fits like a glove (24/11/2015)

Quality Gas Block! (23/04/2015)

1 to 2 thousandths off (04/10/2016)

Gas block would not fit on my barrel. I had a machinist measure and it was 2 thousandths off. It won't fit. I should have gone with a clamp on I guess.

peace of junk (26/05/2015)

Excellent Fit (14/12/2015)

Excellent product for low profile apps (12/05/2011)

Another Great Gas Block From Sadlak LLC! (10/11/2012)

You get what you pay for (30/11/2012)

Good design poor machining (18/04/2013)

Don't judge a book by its cover (25/07/2013)

Very disappointed with this product! (18/02/2014)

It wouldn't fit on my AR-Stoner barrel. I should have spent a little more and bought a YHM low profile gas glock instead.

Great product! (27/06/2014)

I have used many of these and each one was great. Nice fit, easy to install, looks good, and it works.

Decent (25/07/2014)

Won't fit. (13/09/2014)

Out of spec. only .745 inside diameter won't fit the brownells .750 barrel.

Does not fit (05/10/2016)

Does not fit. Previous reviews state this issue.

Not for AR 308 great for AR 15 (29/06/2012)

Solid steel

Favorite Gas Block!! Good Job Sadlak!! (10/11/2012)

my go-to block (13/08/2014)

Not impressed (25/05/2016)

Leer 21 mas calificaciones en brownells.com

Los clientes compraron

TTI INTL

TTI INTL FIRING PIN RETAINER PIN
AR-15/M16 FIRING PIN RETAINING PIN FIVE PACK

Retenedores del pasador percutor

4,5

Reordenado

21,90 €

TTI INTL

TTI INTL BOLT CATCH PIN
GAS TUBE PIN

Trigger Guard Pins | Pasadores del estractor

Reordenado

21,90 € 16,90 € - 21,90 €

COLT

HINGE PIN RETAINING RING FOR COLT AR15-A4
AR15A4 HINGE PIN RETAINING RING

Ejection Port Cover Assemblies

En stock

9,90 €

COLT

EJECTION PORT COVER FOR COLT AR15-A4 BLACK
AR15A4 EJECTION PORT COVER

Ejection Port Covers

Reordenado

22,90 €

COLT

COLT AR15A4 FIRING PIN
AR15A4 FIRING PIN

Pasador de cerrojos

Reordenado

28,90 €

SADLAK INDUSTRIES
AR-15/M16 GAS BLOCKS

Evaluaciones de clientes para SADLAK INDUSTRIES EXTENDED NOSE, STEEL

Top takeaways

Atributos

Detalles del artículo

Operador económico responsable según el reglamento de la UE

Evaluaciones de clientes para SADLAK INDUSTRIES EXTENDED NOSE, STEEL

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

SADLAK INDUSTRIES AR-15/M16 GAS BLOCKS

Evaluaciones de clientes para SADLAK INDUSTRIES EXTENDED NOSE, STEEL

Top takeaways

Atributos

Detalles del artículo

Operador económico responsable según el reglamento de la UE

Evaluaciones de clientes para SADLAK INDUSTRIES EXTENDED NOSE, STEEL

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

SADLAK INDUSTRIES
AR-15/M16 GAS BLOCKS