Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

BROWNELLS
AR-15/M16 HANDGUARD ALIGNMENT TOOL

050806005990 080000368

Maintains Precise Handguard Alignment While Tightening The Locking Ring

Eyeballing a railed, free-float handguard for perfect alignment with your flattop receiver is only half the battle. Keeping it from going cockeyed as you tighten the locking ring is another story. Talk about frustrating! Avoid the hassle with this handy jig that aligns the top handguard rail with the receiver rail and keeps it there. Just slide the jig on the rails, secure its setscrews, and tighten the locking ring you re done! With the time it saves, this tool will pay for itself the first few times you use it. A must for maintaining handguard alignment to ensure night vision devices, vertical grips, flip-up front sights, and other add-on accessories are also properly aligned. Precision machined from high-quality 6061 billet aluminum, then hardcoat anodized for extra strength and years of wear resistance. Designed for use with railed, free-float tubes that have a locking ring.

SPECS: Aluminum, hardcoat anodized, black. 3½" (8.9cm) long, 1" (2.5cm) wide, 1½" (3.8cm) high.

Más...

Mantiene la Alineación Precisa del Guardamanos Mientras Se Aprieta el Anillo de Bloqueo

Alinear a ojo una guardamanos flotante con rieles para que quede perfecto con tu receptor de plataforma plana es solo la mitad de la batalla. Evitar que se tuerza mientras aprietas el anillo de bloqueo es otra historia. ¡Hablar de frustración! Evita el problema con esta práctica plantilla que alinea el riel superior del guardamanos con el riel del receptor y lo mantiene en su lugar. Simplemente desliza la plantilla en los rieles, asegura sus tornillos de fijación y aprieta el anillo de bloqueo ¡y listo! Con el tiempo que ahorra, esta herramienta se paga por sí misma las primeras veces que la uses. Esencial para mantener la alineación del guardamanos y asegurar que dispositivos de visión nocturna, empuñaduras verticales, miras frontales plegables y otros accesorios adicionales también estén correctamente alineados. Mecanizado con precisión a partir de aluminio billet 6061 de alta calidad, luego anodizado duro para una mayor resistencia y años de resistencia al desgaste. Diseñado para uso con tubos flotantes con rieles que tienen un anillo de bloqueo.

ESPECIFICACIONES: Aluminio, anodizado duro, negro. 3½" (8,9cm) de largo, 1" (2,5cm) de ancho, 1½" (3,8cm) de alto.

Más...

Evaluaciones de clientes para BROWNELLS HANDGUARD ALIGNMENT TOOL

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 2,1

Super Easy To Use (30/06/2009)

Does exactly what they claim. It makes getting your rail perfectly aligned with your flattop receiver a breeze. If you're going to invest [$] in a top of the line rail system it just makes good sense to make sure it's lined up As close to perfectly as humanly possible.Just be careful. Mine had a slight burr that would have scratched the finish if I hadn't caught it.

May be good for some, not others. (24/11/2010)

Found that this tool does not do a good job for screw on free float tubes such as thoses made by DPMS or Yankee Hill (Ones that screw onto a barrel nut that is provided with the tube.) Simply put, it does help line up the rails; however you will not be able to exert enough torque on the jam nut to securely hold the tube. Found out that I had to remove the tool and use a strap wrench and eyeball it as I had always done. It may help with the free float tubes that clamp onto the standard barrel retaining nuts; however, many of these index with the teeth on the nut. If they are not positioned exactly center of the rail when the barrel is installed, the tube will be off as well. Perhaps it was not designed for it, but it does not work on most free float tubes I have experence with. It may work if you are attempting to install a picatinny rail section to a standard round free float tube or some other custom application.

Well Worth The Money (03/02/2012)

I used this tool to install a YHM handguard and completed the job in less than ten minutes. It sure beats trying to keep everything aligned with a ruler while tightening the jam nut.

Hit and miss (03/04/2013)

This product does work - HOWEVER; The design requires that the tool be "slid" down the rail to get it into position and is VERY tight on most rails I've used it with. This COULD cause scratches or marring - nothing that will affect proper function of the completed system but if it's a customers' rifle or one you don't want to scratch/mar, then you'll end up not using this and line up the rails without it.... If both sections were bolt-on instead.... Just sayin'

Worthless (25/09/2014)

The tool that received does not fit on the rails at all. The fit was so tight, all it did was end up scratching up the rails. I finally gave up trying to make it fit. Worthless.

Poor Choice (16/01/2017)

Well, I normally would not have purchased this because of the reviews, but I figured âwhy notâ try it. Now that I have tried it, itâs nothing more than an expensive paperweight. It doesnât work on any handguard or receiver I own. It will damage your finish because itâs toooo tight. It was a nice thought to have two adjustment screws on the larger block, but they serve no useful purpose. Would recommend, if Brownells desires, to at least enable the two adjustment screws to be able to tighten around the rails. Overall, just a mistake and would not recommend to anyone.

It will damage upper. (05/05/2017)

Nice idea, but needs serious redesign. Does not fit all rails. Can scar and/or scrape surfaces.

Leer 7 mas calificaciones en brownells.com

79.9 79.9 1 EUR

N.º de producto: 080000368
BROWNELLS HANDGUARD ALIGNMENT TOOL 050806005990 Alinear a ojo una guardamanos flotante con rieles para que quede perfecto con tu receptor de plataforma plana es solo la mitad de la batalla. Evitar que se tuerza mientras aprietas el anillo de bloqueo es otra historia. ¡Hablar de frustración! Evita el problema con esta práctica plantilla que alinea el riel superior del guardamanos con el riel del receptor y lo mantiene en su lugar. Simplemente desliza la plantilla en los rieles, asegura sus tornillos de fijación y aprieta el anillo de bloqueo ¡y listo! Con el tiempo que ahorra, esta herramienta se paga por sí misma las primeras veces que la uses. Esencial para mantener la alineación del guardamanos y asegurar que dispositivos de visión nocturna, empuñaduras verticales, miras frontales plegables y otros accesorios adicionales también estén correctamente alineados. Mecanizado con precisión a partir de aluminio billet 6061 de alta calidad, luego anodizado duro para una mayor resistencia y años de resistencia al desgaste. Diseñado para uso con tubos flotantes con rieles que tienen un anillo de bloqueo.

79.9 EUR 0 79,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Hacer: AR-15

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

La herramienta alinea el riel superior del guardamanos con el riel del receptor y lo mantiene en su lugar, facilitando el apriete del anillo de bloqueo.
Es esencial para asegurar la correcta alineación de accesorios adicionales como dispositivos de visión nocturna, empuñaduras verticales y miras frontales plegables.
Fabricada con aluminio billet 6061 anodizado duro, ofrece alta resistencia y durabilidad, ideal para tubos flotantes con rieles y anillo de bloqueo.

Atributos

Hacer: AR-15 Peso de entrega: 0,249kg Altura de envío: 58mm Ancho de envío: 61mm Longitud de envío: 122mm UPC : 050806005990

Detalles del artículo

Hecho en USA

Alinea tu guardamanos AR-15 con precisión usando la herramienta de Brownells. 🔧 Ahorra tiempo y evita frustraciones en el proceso.

Maintains Precise Handguard Alignment While Tightening The Locking Ring

SPECS: Aluminum, hardcoat anodized, black. 3½" (8.9cm) long, 1" (2.5cm) wide, 1½" (3.8cm) high.

Más...

Mantiene la Alineación Precisa del Guardamanos Mientras Se Aprieta el Anillo de Bloqueo

ESPECIFICACIONES: Aluminio, anodizado duro, negro. 3½" (8,9cm) de largo, 1" (2,5cm) de ancho, 1½" (3,8cm) de alto.

Más...

Evaluaciones de clientes para BROWNELLS HANDGUARD ALIGNMENT TOOL

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 2,1

Super Easy To Use (30/06/2009)

May be good for some, not others. (24/11/2010)

Well Worth The Money (03/02/2012)

I used this tool to install a YHM handguard and completed the job in less than ten minutes. It sure beats trying to keep everything aligned with a ruler while tightening the jam nut.

Hit and miss (03/04/2013)

Worthless (25/09/2014)

The tool that received does not fit on the rails at all. The fit was so tight, all it did was end up scratching up the rails. I finally gave up trying to make it fit. Worthless.

Poor Choice (16/01/2017)

It will damage upper. (05/05/2017)

Nice idea, but needs serious redesign. Does not fit all rails. Can scar and/or scrape surfaces.

Leer 7 mas calificaciones en brownells.com

BROWNELLS
AR-15/M16 HANDGUARD ALIGNMENT TOOL

Evaluaciones de clientes para BROWNELLS HANDGUARD ALIGNMENT TOOL

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para BROWNELLS HANDGUARD ALIGNMENT TOOL

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

BROWNELLS AR-15/M16 HANDGUARD ALIGNMENT TOOL

Evaluaciones de clientes para BROWNELLS HANDGUARD ALIGNMENT TOOL

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para BROWNELLS HANDGUARD ALIGNMENT TOOL

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

BROWNELLS
AR-15/M16 HANDGUARD ALIGNMENT TOOL