Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

DOUBLE STAR
AR-15/M16 SLING ADAPTER END PLATE

841348100478 100004533

Increases Sling-Attachment Versatility On Collapsible-Stock Rifles & Carbines

Machined steel replacement for the factory receiver plate gives an AR fitted with an M4-type collapsible buttstock a convenient, low-profile attachment point for clip-on, single-point slings. Precision machined from 1018 carbon steel for superior strength and an exact fit, with a durable manganese phosphate Parkerized finish that resists surface abrasion and corrosion, and matches the finish on mil-spec anodized receivers. Available in single-loop Right-Hand (RH) as well as a convenient, versatile Ambidextrous configuration that lets you swap the sling from one side of the receiver to the other. An adapter that is designated as a right hand (RH) adapter is for right handed shooters and will be mounted on the left side of the gun. Photos are of viewing the sling adapter from the rear.

SPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.

Más...

Aumenta la Versatilidad de Puntos de Sujeción de Correas en Rifles y Carabinas con Culata Plegable

Placa de acero mecanizado de reemplazo para la placa receptora de fábrica que proporciona a un AR equipado con una culata plegable tipo M4, un punto de sujeción discreto y de perfil bajo para correas de un solo punto que se enganchan. Mecanizado con precisión a partir de acero al carbono 1018 para una resistencia superior y un ajuste exacto, con un duradero acabado Parkerizado de fosfato de manganeso que resiste la abrasión superficial y la corrosión, y coincide con el acabado de los receptores anodizados mil-spec. Disponible en configuración de un solo bucle para diestros (RH) así como en una conveniente y versátil configuración ambidiestra que te permite cambiar la correa de un lado del receptor al otro. Un adaptador que se designa como adaptador para diestros (RH) es para tiradores diestros y se montará en el lado izquierdo del arma. Las fotos muestran el adaptador de la correa visto desde la parte trasera.

ESPECIFICACIONES: Acero 1018, acabado Parkerizado, mate negro. Compatible con AR-15/M16/M4 y clones equipados con culata plegable estilo M4.

Más...

Evaluaciones de clientes para DOUBLE STAR RH SLING ADAPTER PLATE

Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 3,4

Solid (18/03/2010)

Purchased two Right hand sets to complete Aero Precision lowers. They are thicker than standard receiver plates and seem like a nice addition for a single point sling set up. The lower sections and loop are a bit too "squared" and don't fully compliment its attachment to lower receiver.Just a small disappointment to an otherwise solid product at a great price.

Good product (04/02/2011)

Recently purchased 50 of these to outfit department's new Patrol Rifles. With the exception of two, they fit the mil-spec diameter buffer tubes. The remaining two only required minor adjustment of the indexing stud with a file. They do their job at an excellent price.

Worth every penny (19/04/2011)

Own 6 AR15s now, and have customized literally HUNDREDS of them for friends. ANY of them with colapsable stocks get this modification. for a few bucks, why NOT, add to it a inexpensive single point sling and your ready to go, wether its hunting, competative shooting, or just for the comfort of carry. Im sold on them !!

Flawless Install (25/10/2011)

Just installed this on my TROY MOD 1 M14/M1A build. Installs flawlessly and is really sturdy!

Great Product (06/11/2011)

Works great with the 1 1/4" HK-Style Sling Snap Hook (product 080-000-797). Solid and silent. It's all you need for the right price!

Cheap for a reason (24/12/2011)

Cheap steel. the single point sling i have dug into the steel of the end plate easily no matter how it was configured. Don't buy, you will just have to buy another one.

Poor fit for a mil-spec Armalite tube (08/06/2012)

I tried to fit this end plate on the mil-spec tube that came with my Armalite rifle, but it would not fit over the threads.

Okay (11/05/2013)

It works for single point slings HK style hooks real well. It looks to be cheaply made, and unfortunately I had to file it a bit to get it to fit on my buffer tube alignment notch. I tried 3 different tubes I had and it wouldn't slip over and align with the notch on the tubes until I filed it only just a little bit. It does not fit with certain pistol grips like the Magpul MIAD or others that have the bit that extends over the lower receiver.

works on pistol buffer tube (12/03/2016)

i needed an ambi single pt adapter for an AR pistol buffer tube setup. no one talks about fit for the pistol buffer tubes. this worked like a champ with minor modification - filling down the notch - which coincidentally makes the notch look like receiver plate that came with the pistol setup. the steel is soft enough that a hand file was sufficient to the task in a matter of minutes; so it may not last, but the price was good and it appears to working for now. i am buying more for other builds. it does not get in the way of the charging handle or forward assist.

Functional at a good price (26/06/2017)

I purchased this item for a carbine rifle build. The item is constructed well and fits nicely. It came packed with no instructions on how to install, which for me was not a problem, but someone who does not know what they are doing it might pose an issue. I am a certified AR-15 / M-16 Armorer and I am the police department armorer I use a single point sling on my rifle and this item will be utilized and works well for my law enforcement job.

Not Good is too high of a rating (22/11/2010)

I installed 150 of these on our departments rifles. Within 45 days the slings had wore through the sling mount and we had rifles falling to the floor. 1018 steel is too weak. Do not buy this product.

Leer 11 mas calificaciones en brownells.com

21.9 25.9 2 EUR

N.º de producto: 100004533
DOUBLE STAR RH SLING ADAPTER PLATE
Ref Fabricante: JT345R 841348100478 Placa de acero mecanizado de reemplazo para la placa receptora de fábrica que proporciona a un AR equipado con una culata plegable tipo M4, un punto de sujeción discreto y de perfil bajo para correas de un solo punto que se enganchan. Mecanizado con precisión a partir de acero al carbono 1018 para una resistencia superior y un ajuste exacto, con un duradero acabado Parkerizado de fosfato de manganeso que resiste la abrasión superficial y la corrosión, y coincide con el acabado de los receptores anodizados mil-spec. Disponible en configuración de un solo bucle para diestros (RH) así como en una conveniente y versátil configuración ambidiestra que te permite cambiar la correa de un lado del receptor al otro. Un adaptador que se designa como adaptador para diestros (RH) es para tiradores diestros y se montará en el lado izquierdo del arma. Las fotos muestran el adaptador de la correa visto desde la parte trasera.

25.9 EUR 2 25,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Rifle Sling Adapter Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Placa de acero mecanizado 1018 con acabado Parkerizado, resistente a la abrasión y corrosión.
Proporciona un punto de sujeción discreto para correas de un solo punto en AR-15/M16/M4 con culata plegable.
Disponible en configuración diestro (RH) y ambidiestra, permite cambiar la correa de un lado al otro.

Atributos

Color: Black Estilo: Rifle Sling Adapter Material: Steel Peso de entrega: 0,045kg Altura de envío: 18mm Ancho de envío: 99mm Longitud de envío: 122mm UPC : 841348100478

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

N.º de producto: 100004532
DOUBLE STAR AMBIDEXTROUS SLING ADAPTER PLATE
Ref Fabricante: JT345 841348100454 Placa de acero mecanizado de reemplazo para la placa receptora de fábrica que proporciona a un AR equipado con una culata plegable tipo M4, un punto de sujeción discreto y de perfil bajo para correas de un solo punto que se enganchan. Mecanizado con precisión a partir de acero al carbono 1018 para una resistencia superior y un ajuste exacto, con un duradero acabado Parkerizado de fosfato de manganeso que resiste la abrasión superficial y la corrosión, y coincide con el acabado de los receptores anodizados mil-spec. Disponible en configuración de un solo bucle para diestros (RH) así como en una conveniente y versátil configuración ambidiestra que te permite cambiar la correa de un lado del receptor al otro. Un adaptador que se designa como adaptador para diestros (RH) es para tiradores diestros y se montará en el lado izquierdo del arma. Las fotos muestran el adaptador de la correa visto desde la parte trasera.

21.9 EUR 39 21,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Rifle Sling Adapter Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Mejora tu AR-15 con el Sling Adapter End Plate de DOUBLE STAR. 🔧 Resistente, discreto y perfecto para tiradores diestros. ¡Consíguelo ya!

Increases Sling-Attachment Versatility On Collapsible-Stock Rifles & Carbines

SPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.

Más...

Aumenta la Versatilidad de Puntos de Sujeción de Correas en Rifles y Carabinas con Culata Plegable

ESPECIFICACIONES: Acero 1018, acabado Parkerizado, mate negro. Compatible con AR-15/M16/M4 y clones equipados con culata plegable estilo M4.

Más...

Evaluaciones de clientes para DOUBLE STAR RH SLING ADAPTER PLATE

Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 3,4

Solid (18/03/2010)

Good product (04/02/2011)

Worth every penny (19/04/2011)

Flawless Install (25/10/2011)

Just installed this on my TROY MOD 1 M14/M1A build. Installs flawlessly and is really sturdy!

Great Product (06/11/2011)

Works great with the 1 1/4" HK-Style Sling Snap Hook (product 080-000-797). Solid and silent. It's all you need for the right price!

Cheap for a reason (24/12/2011)

Cheap steel. the single point sling i have dug into the steel of the end plate easily no matter how it was configured. Don't buy, you will just have to buy another one.

Poor fit for a mil-spec Armalite tube (08/06/2012)

I tried to fit this end plate on the mil-spec tube that came with my Armalite rifle, but it would not fit over the threads.

Okay (11/05/2013)

works on pistol buffer tube (12/03/2016)

Functional at a good price (26/06/2017)

Not Good is too high of a rating (22/11/2010)

I installed 150 of these on our departments rifles. Within 45 days the slings had wore through the sling mount and we had rifles falling to the floor. 1018 steel is too weak. Do not buy this product.

Leer 11 mas calificaciones en brownells.com