Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

PHASE 5 TACTICAL
AR-15/M16 V1 EXTENDED BOLT RELEASE

813318020192 100004898

Catch & Release Bolt With Trigger Finger For Faster Mag Changes & Jam Clearing

Extended release lever speeds magazine changes and enhances the shooter’s ability to clear jams, double feeds, and malfunctions quickly and safely. Lets you catch and release the bolt with the trigger finger inside the triggerguard, instead of with your off hand. Push upward on the lever to lock the bolt rearward; push lightly downward to release it. Both operations can be performed without removing your hand from the pistol grip. EBRv1 clamps to your rifle’s existing bolt release. Can be installed or removed in minutes with no permanent alteration to your rifle.

SPECS: Machined steel, matte black finish. 2¼" (5.3cm) long. ½ oz. (14g) wt.

Más...

Atrapar y Liberar el Cerrojo con el Dedo del Gatillo para Cambios de Cargador Más Rápidos y Despejar Atascos

El palanca de liberación extendida agiliza los cambios de cargador y mejora la capacidad del tirador para despejar atascos, alimentaciones dobles y fallos de manera rápida y segura. Te permite atrapar y liberar el cerrojo con el dedo del gatillo dentro del guardamonte, en lugar de con la mano opuesta. Empuja hacia arriba la palanca para bloquear el cerrojo hacia atrás; empuja ligeramente hacia abajo para liberarlo. Ambas operaciones se pueden realizar sin retirar la mano del pistolete. El EBRv1 se sujeta al liberador de cerrojo existente de tu rifle. Se puede instalar o quitar en minutos sin alteraciones permanentes en tu rifle.

ESPECIFICACIONES: Acero mecanizado, acabado mate negro. 2¼" (5.3cm) de largo. ½ oz. (14g) de peso.

Más...

Evaluaciones de clientes para PHASE 5 TACTICAL EBRV1 EXTENDED BOLT RELEASE

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,8

ONE OF THE VERY FEW AR MUST HAVES (05/06/2010)

THIS IS ABSOLUTELY ONE OF THE VERY FEW MUST HAVES OUT OF ALL THE JUNK YOU CAN BOLT ONTO THE AR THIS SMALL PART IS PHENOMENAL. A MUST HAVE FOR THE AVID AR SHOOTER ALMOST CUTS RELOAD TIME IN HALF. BECAUSE YOU CAN KEEP BOTH HANDS ON THE RIFLE WHERE THEY BELONG AND DONT HAVE TO BREAK YOUR GRIP IS WHAT MAKES THIS SMALL PART AMAZING. THE POSITION OF THE END OF THE RELEASE IS SO NATURAL ITS RIGHT NEXT TO THE MAG RELEASE. WITH YOUR TRIGGER FINGER STRAIGHT ALONG THE SIDE OF THE GUN DURING A MAG CHANGE ALL YOU HAVE TO DO TO RELEASE THE BOLT IS TO SWEEP YOUR TRIGGER FINGER DOWNWARD ABOUT 1/2" AND YOUR READY TO GO. CANT SAY ENOUGH GOOD THINGS ABOUT THIS SMALL PART. BUY IT!! BUY IT!!

wont fit dpms lr308 (12/09/2011)

wont fit the dpms 308 because of the indentation of the bolt release

Worth It (23/12/2013)

Fast and easy install * Works like designed * Will be getting more for other AR's. Be careful you don't loose the spring when taking off the original bolt release.

AR-15 Ambi Fitment (20/10/2014)

Purchased this to try on several AR-15 lowers. Sig 516, Sig M400 (it uses the same lower at the 516), a Windham lower and, a Rock River Lower. It works on all of them. Drops in easily. But, use caution when you are trying to use a small punch to remove the roll pin. Put a cloth or something round the entire area or you'll get to bare metal at the speed of light! Suggest save your pin. The one that normally comes with this EBRv1 may or, may not be in the package......And, slowly does it and, it'll drop right in. Also, use caution you don't lose the pin and spring under the latch......it can fly out or fall out and, they are small......hard to find etc. It is well designed in my opinion, solid and does it's job. but, I docked it a star because for my taste.....I would like the part that goes thru the trigger housing area, to be about 1/8" longer and, it should be bent down a few degree's to keep it down slightly lower for ease of operation. I also have a nice slip over one I bought from Tactical Link on the M400, I found that I had to bend that Tac Link one slightly out away from the lower, in order to keep it from contacting the lower where it goes thru the trigger housing......Before I did that, I was having trouble with the system failing to lock back the bolt after the mag was empty. Which is a pain because you're never sure if you had a FTF or, not. The Sig's (M400/516) need a straight down handle so it doesn't hit the left side mag release. The ambi bolt release I like the best, I bought from Troy industries.......the handles slight longer and, on the Windham and RRA's lowers it doesn't touch anything. If anyone would like to know the number of that my email is below, or they are easily found at both sites......Hope this helps.......

Not impressed, rather have the BAD lever (31/01/2017)

Not impressed with it. I installed it and fit was not quite right. I feel the Magpul was better and easier to install. I wanted to give it a chance and its not for me. Will get Magpul for the next one.

Leer 5 mas calificaciones en brownells.com

69.9 69.9 1 EUR

N.º de producto: 100004898
PHASE 5 TACTICAL EBRV1 EXTENDED BOLT RELEASE
Ref Fabricante: EBRV1 813318020192 El palanca de liberación extendida agiliza los cambios de cargador y mejora la capacidad del tirador para despejar atascos, alimentaciones dobles y fallos de manera rápida y segura. Te permite atrapar y liberar el cerrojo con el dedo del gatillo dentro del guardamonte, en lugar de con la mano opuesta. Empuja hacia arriba la palanca para bloquear el cerrojo hacia atrás; empuja ligeramente hacia abajo para liberarlo. Ambas operaciones se pueden realizar sin retirar la mano del pistolete. El EBRv1 se sujeta al liberador de cerrojo existente de tu rifle. Se puede instalar o quitar en minutos sin alteraciones permanentes en tu rifle.

69.9 EUR 0 69,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Hacer: AR-15

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

La palanca de liberación extendida EBRv1 permite cambios de cargador más rápidos y despeje de atascos sin retirar la mano del pistolete.
Se puede instalar o quitar en minutos sin alteraciones permanentes en tu rifle AR-15.
Fabricada en acero mecanizado con acabado mate negro, mide 2¼" de largo y pesa ½ oz.

Atributos

Hacer: AR-15 Peso de entrega: 0,045kg Altura de envío: 1mm Ancho de envío: 79mm Longitud de envío: 152mm UPC : 813318020192

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Mejora tu AR-15 con el EBRV1 Extended Bolt Release 🔧. Cambios rápidos de cargador y fácil liberación del cerrojo. ¡Instalación en minutos!

Catch & Release Bolt With Trigger Finger For Faster Mag Changes & Jam Clearing

SPECS: Machined steel, matte black finish. 2¼" (5.3cm) long. ½ oz. (14g) wt.

Más...

Atrapar y Liberar el Cerrojo con el Dedo del Gatillo para Cambios de Cargador Más Rápidos y Despejar Atascos

ESPECIFICACIONES: Acero mecanizado, acabado mate negro. 2¼" (5.3cm) de largo. ½ oz. (14g) de peso.

Más...

Evaluaciones de clientes para PHASE 5 TACTICAL EBRV1 EXTENDED BOLT RELEASE

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,8

ONE OF THE VERY FEW AR MUST HAVES (05/06/2010)

wont fit dpms lr308 (12/09/2011)

wont fit the dpms 308 because of the indentation of the bolt release

Worth It (23/12/2013)

Fast and easy install * Works like designed * Will be getting more for other AR's. Be careful you don't loose the spring when taking off the original bolt release.

AR-15 Ambi Fitment (20/10/2014)