Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

M4 BUTTSTOCK TOOL

050806107236 080000291

One Tool For Disassembling & Reassembling Buttstocks

Our handy, compact tool is uniquely designed to combine several tools into one. It has a spanner wrench that fits the receiver extension castle nut on M4-style collapsible buttstocks, with interchangeable pins to fit nuts with both old (round) and new (square) teeth, so you're ready for whatever type of nut is on the gun in front of you. Pins for both styles are included and easily changed by loosening a hex screw in the tool. For fixed rifle buttstocks, there's a screwdriver blade to remove the buttplate screws and a wrench for the nut on the receiver extension (buffer) tube. There's even a ½" square opening for a torque wrench, and even a hole for hanging the tool on your peg-board. Fits easily in a range bag or in your pocket for use outside the shop.

SPECS: Steel, black. 7" (17.8cm) long. Includes pins for old- and new-style stock ring retainers.

Más...

Una Herramienta para Desmontar y Montar Culatas

Nuestra herramienta compacta y práctica está diseñada de manera única para combinar varias herramientas en una sola. Tiene una llave de gancho que se ajusta a la tuerca del castillo de la extensión del receptor en las culatas colapsables estilo M4, con pasadores intercambiables que se adaptan a tuercas con dientes tanto antiguos (redondos) como nuevos (cuadrados), así que estás preparado para cualquier tipo de tuerca que tenga el arma frente a ti. Se incluyen pasadores para ambos estilos y se pueden cambiar fácilmente aflojando un tornillo hexagonal en la herramienta. Para las culatas fijas de rifle, hay una cuchilla de destornillador para quitar los tornillos de la placa de la culata y una llave para la tuerca en el tubo de extensión del receptor (buffer). Incluso hay una abertura cuadrada de ½" para una llave de torque, e incluso un orificio para colgar la herramienta en tu tablero perforado. Cabe fácilmente en una bolsa de tiro o en tu bolsillo para usar fuera del taller.

ESPECIFICACIONES: Acero, negro. 7" (17.8cm) de largo. Incluye pasadores para los retenedores del anillo de la culata de estilo antiguo y nuevo.

Más...

Evaluaciones de clientes para BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 5

Great tool (16/09/2009)

This is a solid and effective tool for its stated purpose.

Awsome (16/09/2011)

This wrench is awsome, perfict fit, works great..

Spend the money to get great tools not cheap ones!

Very nice tool (29/02/2012)

This one works as advertised. It's very durable and functional, though a bit pricey. But you get what you pay for...

Solid Tool! Worth the Price! (23/02/2014)

This wrench is solid! The replacable pin is a great feature. My only recommendation would be to machine a place somewhere on the wrench to store the other pin when not in use.

M16/M4 Buttstock Tool by BROWNELLS (15/03/2014)

If you want the best this is the one to get . Fit, feel and finish is second to none. Well worth the money.

Well made. Inspired confidence. (01/04/2014)

I purchased this tool with some concern. I have an older AR-15 that had a 2 position collapsible stock with the 2 round holes instead of the normal castle nut and were well staked in place. I had been told how difficult some staked castle nuts were to remove. A friend who has built several AR-15's suggested just cutting the castle nut with a dremel which would likely destroy the tube as well. I wanted to remove the parts but retain them for collectors purposes and switch them out for a current 6 position stock tube. I just clamped the lower receiver in a vise using Brownells rubber faced vise jaws and was able to remove the ring without damage to the lower or the castle nut. I did tap the wrench with a plastic mallet several times before attempting to loosen the castle nut. This tool worked like a charm and I have already told several other people how well it worked. Brownells guarantee gave me the confidence to try it myself instead of paying someone else to remove the stock nut for me.

Great tool, just one hiccup (22/11/2015)

So I gave this 5 stars, despite my hiccup.

This tool is great, it's really well made and feels incredibly sturdy.

My hiccup occurred because I used it on a barrel nut, not a buttstock. If you're using this for your buttstock, no need to read any further...

The Centurion CMR handguard does not come with a tool. Centurion says that you should use a buttstock tool to install the barrel nut since it is the same diameter as the castlenut on a carbine stock. The problem is that you have to use a tool that has one "nub" on it, not three like most others have. These "nubs" aren't meant to torque a barrel nut to 30ft/lbs.

I used my generic amazon AR15 tool to install the barrel nut and caused the "nub" to break off. I bought this thinking it may work for me. This tool has a small replaceable pin (as pictured), which bent and became unusable almost instantly. Luckily, I was able to use a 1/8in punch in the hole perfectly fine.

I'm still 100% happy with this tool, the pin broke because it wasn't designed for the torque but luckily it has a great design where you can replace the pin.

Obviously, the only thing I would change about this is tool is for it to come with a stronger pin. However, if you're building an AR15 you should already have an assortment of punches, which you can use with this tool.

Leer 7 mas calificaciones en brownells.com

79.9 79.9 1 EUR

N.º de producto: 080000291
BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL 050806107236 Nuestra herramienta compacta y práctica está diseñada de manera única para combinar varias herramientas en una sola. Tiene una llave de gancho que se ajusta a la tuerca del castillo de la extensión del receptor en las culatas colapsables estilo M4, con pasadores intercambiables que se adaptan a tuercas con dientes tanto antiguos (redondos) como nuevos (cuadrados), así que estás preparado para cualquier tipo de tuerca que tenga el arma frente a ti. Se incluyen pasadores para ambos estilos y se pueden cambiar fácilmente aflojando un tornillo hexagonal en la herramienta. Para las culatas fijas de rifle, hay una cuchilla de destornillador para quitar los tornillos de la placa de la culata y una llave para la tuerca en el tubo de extensión del receptor (buffer). Incluso hay una abertura cuadrada de ½" para una llave de torque, e incluso un orificio para colgar la herramienta en tu tablero perforado. Cabe fácilmente en una bolsa de tiro o en tu bolsillo para usar fuera del taller.

79.9 EUR 0 79,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Hacer: AR-15

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Herramienta compacta y práctica diseñada para combinar varias funciones en una sola, incluyendo una llave de gancho y una cuchilla de destornillador.
Incluye pasadores intercambiables para tuercas de castillo tanto antiguas (redondas) como nuevas (cuadradas), ajustables con un tornillo hexagonal.
Compatible con culatas colapsables estilo M4 y culatas fijas de rifle, con una abertura cuadrada de ½" para una llave de torque y un orificio para colgar.

Atributos

Hacer: AR-15 Peso de entrega: 0,181kg Altura de envío: 5mm Ancho de envío: 66mm Longitud de envío: 229mm UPC : 050806107236

Detalles del artículo

Hecho en USA

Descubre la herramienta AR-15/M16/M4 de BROWNELLS 🛠️, compacta y versátil, ideal para ajustar tu culata en cualquier situación.

One Tool For Disassembling & Reassembling Buttstocks

SPECS: Steel, black. 7" (17.8cm) long. Includes pins for old- and new-style stock ring retainers.

Más...

Una Herramienta para Desmontar y Montar Culatas

ESPECIFICACIONES: Acero, negro. 7" (17.8cm) de largo. Incluye pasadores para los retenedores del anillo de la culata de estilo antiguo y nuevo.

Más...

Evaluaciones de clientes para BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 5

Great tool (16/09/2009)

This is a solid and effective tool for its stated purpose.

Awsome (16/09/2011)

This wrench is awsome, perfict fit, works great..

Spend the money to get great tools not cheap ones!

Very nice tool (29/02/2012)

This one works as advertised. It's very durable and functional, though a bit pricey. But you get what you pay for...

Solid Tool! Worth the Price! (23/02/2014)

This wrench is solid! The replacable pin is a great feature. My only recommendation would be to machine a place somewhere on the wrench to store the other pin when not in use.

M16/M4 Buttstock Tool by BROWNELLS (15/03/2014)

If you want the best this is the one to get . Fit, feel and finish is second to none. Well worth the money.

Well made. Inspired confidence. (01/04/2014)