English-made with heat-treated, flat-nosed jaws. Smooth-jawed model gives a tight, non-marking grip. Serrated model holds tightly and includes a lengthwise groove to hold wire or drilled rod.
SPECS: Both; 5" (12.7cm) long, 1-1/8" (2.9cm) deep throat, open to 7/16" (11.1mm) wide. Nickel plated handles, blued jaws.
Más...
Los alicates de mandíbulas paralelas más "paralelos" que hemos encontrado
Fabricado en Inglaterra con mordazas planas tratadas térmicamente. El modelo con mordazas lisas proporciona un agarre firme y sin marcas. El modelo serrado sujeta con firmeza e incluye una ranura longitudinal para sostener alambre o varilla perforada.
ESPECIFICACIONES: Ambos; 5" (12.7cm) de largo, 1-1/8" (2.9cm) de profundidad de garganta, se abren hasta 7/16" (11.1mm) de ancho. Mangos niquelados, mordazas azuladas.
Más...
Evaluaciones de clientes para GROBET FILE CO. OF AMERICA INC SERRATED PARALLEL PLIERS
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 5
Would buy this product again and again(14/10/2009)
Excellent quality..The best I've seen in a long time..The jaws are perfectly parralel the full length and come together so perfectly they will hold a single piece of paper!Perfect size for working with guns of any kind. A little pricey but worth it for the quality!
Smooth Jaw Pliers(20/01/2016)
I have several sets of Barnard Pliers that I have been lucky enough to source from the U.S.A.
Most of these pliers have serrated jaws, which are fine for most work and with the addition of a smooth jaw set I have all of the bases covered. There is no substitute for quality tools.
I use my serrated parallels for precise placement of dowel pins when I get ready to press them into place, and also to extract pins too. I have carefully shaped small diameter spring wire using them as well. I keep them very close nearby my vise because I reach for them all the time. The jaws are tough and the handles fit well into the palm of my hand.
Serrated parallel jaw pliers(01/09/2011)
The description needs to have a drawing or picture of serrations and groove dimensions
NICE tool!(25/01/2013)
Recently, I used the serrated jaw pliers to install a Badger Ordinance Tactical Latch lever (093-249-020WB). The pin/wire relief in the one jaw made the job a cinch.
(If you're interested, I reviewed my installation and use of the pliers on that page.)
While a bit pricey, having the right tool for the job--and a well-made tool--is priceless. They are heavy for being so small, but just the right size for firearms work.
N.º de producto: 348181103 GROBET FILE CO. OF AMERICA INC SERRATED PARALLEL PLIERS Ref Fabricante: 1811030501869500071 Fabricado en Inglaterra con mordazas planas tratadas térmicamente. El modelo con mordazas lisas proporciona un agarre firme y sin marcas. El modelo serrado sujeta con firmeza e incluye una ranura longitudinal para sostener alambre o varilla perforada.
38.9EUR038,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Las pinzas tienen mordazas tratadas térmicamente y están fabricadas en Inglaterra.
El modelo serrado incluye una ranura longitudinal para sostener alambre o varilla perforada.
Especificaciones: 5" de largo, 1-1/8" de profundidad de garganta, se abren hasta 7/16" de ancho, mangos niquelados y mordazas azuladas.
Atributos
Peso de entrega: 0,068kgAltura de envío: 13mmAncho de envío: 81mmLongitud de envío: 160mm
UPC
: 501869500071
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
N.º de producto: 348181105 GROBET FILE CO. OF AMERICA INC FLAT NOSE SMOOTH JAW PARALLEL PLIERS Ref Fabricante: 46.512501869500054 Fabricado en Inglaterra con mordazas planas tratadas térmicamente. El modelo con mordazas lisas proporciona un agarre firme y sin marcas. El modelo serrado sujeta con firmeza e incluye una ranura longitudinal para sostener alambre o varilla perforada.
49.9EUR049,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
English-made with heat-treated, flat-nosed jaws. Smooth-jawed model gives a tight, non-marking grip. Serrated model holds tightly and includes a lengthwise groove to hold wire or drilled rod.
SPECS: Both; 5" (12.7cm) long, 1-1/8" (2.9cm) deep throat, open to 7/16" (11.1mm) wide. Nickel plated handles, blued jaws.
Más...
Los alicates de mandíbulas paralelas más "paralelos" que hemos encontrado
Fabricado en Inglaterra con mordazas planas tratadas térmicamente. El modelo con mordazas lisas proporciona un agarre firme y sin marcas. El modelo serrado sujeta con firmeza e incluye una ranura longitudinal para sostener alambre o varilla perforada.
ESPECIFICACIONES: Ambos; 5" (12.7cm) de largo, 1-1/8" (2.9cm) de profundidad de garganta, se abren hasta 7/16" (11.1mm) de ancho. Mangos niquelados, mordazas azuladas.
Más...
Evaluaciones de clientes para GROBET FILE CO. OF AMERICA INC SERRATED PARALLEL PLIERS
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 5
Would buy this product again and again(14/10/2009)
Excellent quality..The best I've seen in a long time..The jaws are perfectly parralel the full length and come together so perfectly they will hold a single piece of paper!Perfect size for working with guns of any kind. A little pricey but worth it for the quality!
Smooth Jaw Pliers(20/01/2016)
I have several sets of Barnard Pliers that I have been lucky enough to source from the U.S.A.
Most of these pliers have serrated jaws, which are fine for most work and with the addition of a smooth jaw set I have all of the bases covered. There is no substitute for quality tools.
I use my serrated parallels for precise placement of dowel pins when I get ready to press them into place, and also to extract pins too. I have carefully shaped small diameter spring wire using them as well. I keep them very close nearby my vise because I reach for them all the time. The jaws are tough and the handles fit well into the palm of my hand.
Serrated parallel jaw pliers(01/09/2011)
The description needs to have a drawing or picture of serrations and groove dimensions
NICE tool!(25/01/2013)
Recently, I used the serrated jaw pliers to install a Badger Ordinance Tactical Latch lever (093-249-020WB). The pin/wire relief in the one jaw made the job a cinch.
(If you're interested, I reviewed my installation and use of the pliers on that page.)
While a bit pricey, having the right tool for the job--and a well-made tool--is priceless. They are heavy for being so small, but just the right size for firearms work.