Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

HORNADY
CAM-LOCK PULLER

090255500950 749003707

The Hornady Cam-Lock Bullet Puller is the nicest collet style puller we have used.The cam feature locks the collet around the bullet and uses your press leverage to pull the bullet. We are really impressed with the quality of this tool and smoothness of operation.

Más...

El Hornady Cam-Lock Bullet Puller es el extractor de tipo collet más agradable que hemos utilizado. La característica de bloqueo por leva asegura el collet alrededor de la bala y utiliza la palanca de tu prensa para extraerla. Estamos realmente impresionados con la calidad de esta herramienta y la suavidad de su funcionamiento.

Más...

Evaluaciones de clientes para HORNADY CAM-LOCK BULLET PULLER

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4

Not well made (21/12/2010)

I purchased this bullet puller 3 weeks ago and after pulling less than 100 bullets (I screwed up a bunch of 6mm reloads), the handle broke. With the bullet stuck in the collet, I have no way to remove the broken part and replace it. Save your money and go with the RCBS puller.

Nice Tool (11/01/2011)

This puller was easy to use in my Forster co-ax press. The Forster puller is well made, but it's a bit hard to hold the die and tighten the collet with a wrench. (pehaps I need to read the directions) This Hornady puller is simple, easy to use and it works FAST in my co-ax press. (1) Adjust the die locking ring height on the puller die so it fits in your press. (2) Adjust the tension on the collet for the specific bullet. (3) Cylcle the press half way to pull the case and bullet into Hornady puller die. (4) Tighten the cam lever on the puller and cycle the press back. 5 STARS from Kepp in Texas

Works as advertised (16/01/2011)

Hornady has had a few issues with bubbles in Turkey-manufactured castings that weaken the product. They replaced my arm on their trimmer within a week. This puller makes it a one-step-job to pull a bullet, rather than having to ratchet the lug to grab the bullet. You may not use it for a year, but when you need one, this is the tool to make it easy.

Only Universal if you buy collets (09/06/2014)

Puller works well but only after you purchase individual caliber specific collets (@$11/ea)
None of the literature or other reviews included the fact that additional collets were needed to utilize the puller. No Collet comes with puller

The Bees Knees (11/06/2018)

After doing some sage rat shooting recently, I realized I had loaded my .20 Practical wildcat cartridges a bit too hot. I had several hundred rounds already loaded and I didn't relish the idea of days using the traditional bullet pulling hammer to unload them all.

A buddy brought over his RCBS bullet puller and immediately the collet started excessively marring the bullets and generally being a pain to use. Now, I have a lot of RCBS gear, so I'm not going to knock them. Every company has a lemon every now and again and they generally have good quality stuff.

I bought the HORNADY CAM-LOCK PULLER and could not be more impressed -- this puppy is the "Bees Knees". Super easy, fast, and no bullet marring. In just a couple of hours using my Rock Chucker, I made it through the several hundred+ rounds and am now ready for reload (I think I'll test with 2-grains less this time). I am super happy with this purchase. Easy to setup, easy to adjust, fast and easy to use with very little force required. Works exactly as advertised.

Leer 5 mas calificaciones en brownells.com

0 0 2 EUR

Sale

N.º de producto: 749003707
HORNADY CAM-LOCK BULLET PULLER
Ref Fabricante: 050095 090255500950 El Hornady Cam-Lock Bullet Puller es el extractor de tipo collet más agradable que hemos utilizado. La característica de bloqueo por leva asegura el collet alrededor de la bala y utiliza la palanca de tu prensa para extraerla. Estamos realmente impresionados con la calidad de esta herramienta y la suavidad de su funcionamiento.

Notificar sobre disponibilidad

No disponible.

Caracteristicas: Calibre: Universal

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El Hornady Cam-Lock Bullet Puller es un extractor de tipo collet con una característica de bloqueo por leva.
Utiliza la palanca de la prensa para extraer la bala, ofreciendo un funcionamiento suave y de alta calidad.
Es adecuado para cualquier calibre, siendo una herramienta universal y altamente eficiente.

Atributos

Calibre: Universal Peso de entrega: 0,227kg Altura de envío: 36mm Ancho de envío: 36mm Longitud de envío: 185mm UPC : 090255500950

Detalles del artículo

Hecho en USA

N.º de producto: 100203146
HORNADY REPLACEMENT CAM-LOCK
Ref Fabricante: 050094 090255500943 El Hornady Cam-Lock Bullet Puller es el extractor de tipo collet más agradable que hemos utilizado. La característica de bloqueo por leva asegura el collet alrededor de la bala y utiliza la palanca de tu prensa para extraerla. Estamos realmente impresionados con la calidad de esta herramienta y la suavidad de su funcionamiento.

Notificar sobre disponibilidad

No disponible.

Caracteristicas:

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El Hornady Cam-Lock Bullet Puller es un extractor de tipo collet muy eficiente y agradable de usar.
La característica de bloqueo por leva asegura el collet alrededor de la bala y utiliza la palanca de la prensa para extraerla.
La herramienta destaca por su alta calidad y suavidad en el funcionamiento.