Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

851100014

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Lets you spend more time practicing with your favorite high-power, match rifle without the recoil. Absolutely no gunsmithing required for amazing muzzle control and greatly reduced felt recoil even on select-fire rifles. Changes the sharp recoil that most shooters experience with the military stock into a soft push. Easily replaces the issue flash hider without alterations and includes the front sight dovetail and castle nut set screw.

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

Más...

Control de Retroceso y Cañón de Fácil Instalación; Compatible con M14/M1A's Nacionales y Chinos

Te permite pasar más tiempo practicando con tu rifle de alta potencia y competición favorito sin el retroceso. Absolutamente no se requiere de armería para un increíble control del cañón y una gran reducción del retroceso percibido, incluso en rifles de fuego selectivo. Cambia el fuerte retroceso que la mayoría de los tiradores experimentan con la culata militar por un suave empuje. Se reemplaza fácilmente el apagallamas de serie sin alteraciones e incluye la ranura para la mira delantera y el tornillo de fijación de la tuerca del castillo.

Nota: NO es compatible con Norinco/Polytech (M305) con rosca M15x.75.

ESPECIFICACIONES: Acero mecanizado, acabado en fosfato de manganeso. 3" (7.6cm) de largo, .862" (21mm) de diámetro, peso de 4.3 oz. (123 g.)

Más...

Evaluaciones de clientes para SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 3,9

Great Product (22/12/2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08/03/2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19/10/2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11/04/2014)

I originally bought this product to give my M1A a different look. I had it installed at my local gun range by a professional gunsmith, shot a few rounds down range just to try this muzzle break, and I can say that it took away the edge of the recoil and made it smoother.I would highly recommend it for all M1A/M14 owners

Disappointing (08/08/2015)

Unlike the Good Iron Muzzle Break for the M1 Garand this is a two piece unit â¦ that is not clear from the description, or pictures, on the web site.

The unit I received had already begun to rust at the point where the rear mount and the break connect. The finish was scratched, dented, and overall the finish was poor.

Perhaps worse than the rust and the finish was that the rear mount and the break were not properly aligned. I didn't break out the protractor to figure out exactly how far, but looking at it from the rear, the break was rotated clockwise 1 to 2 degrees. The interesting thing is that there are alignment marks on both pieces that were apparently not used during assembly. I may have been able to correct the alignment; but with the rust and the poor finish, including burrs and incomplete machining of several of the ports, I returned it.

VERY DISAPPOINTED (03/11/2016)

Highly disappointed!! The muzzle brake I recieved had large amounts of rust on one side, enough that the bag it came in was stained orange. Also there are some scratches. Much like one of the other reviews on this brake mine is also a 2 piece design, both pieces have alignment marks and they are not properly aligned. My biggest issue is the large amount of rust, like it sat in water. Will exchange this one and see how the second one looks.

<img width="500" src='/userdocs/reviewimages/275fafcf-230a-4720-a9c5-6e5bf85ca88b.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/568e58d2-9d4c-40c6-907a-24590b601435.jpg' alt=''>

Settled down the recoil (17/11/2017)

I've got this on my Springfield standard M1A.

Fits on my rifle just fine, turned that recoil down to 3 from a 7, and it looks good.

The timing with the set screw was off a bit so I can't get it in the recess of the castle nut however the set screw it like extra insurance tighten the castlenut to proper and it'll be fine.

Other reviews stated that it was rusty and rusts quickly, my experience with the piece was it came with one small spot with rust. I cleaned and protected it with CLP end of my rusty woes. That was 8 months ago. Also congrats on owning an M1A. I haven't cleaned mine since I put this on it still runs no problems at all!

Leer 7 mas calificaciones en brownells.com

264.9 264.9 1 EUR

N.º de producto: 851100014
SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE
Ref Fabricante: 2001 Te permite pasar más tiempo practicando con tu rifle de alta potencia y competición favorito sin el retroceso. Absolutamente no se requiere de armería para un increíble control del cañón y una gran reducción del retroceso percibido, incluso en rifles de fuego selectivo. Cambia el fuerte retroceso que la mayoría de los tiradores experimentan con la culata militar por un suave empuje. Se reemplaza fácilmente el apagallamas de serie sin alteraciones e incluye la ranura para la mira delantera y el tornillo de fijación de la tuerca del castillo.

264.9 EUR 29 264,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Manganese Phosphate Calibre: 30 Caliber (.308) Hacer: Springfield Material: Stainless Steel Modelo: M14, M1A Roscas: .595-32 Talla: .862

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El SPRINGFIELD M14 MUZZLE BRAKE reduce significativamente el retroceso percibido, permitiendo una práctica más cómoda con rifles de alta potencia.
Fabricado en acero inoxidable con acabado en fosfato de manganeso, es fácil de instalar sin necesidad de armería y reemplaza el apagallamas de serie.
Compatible con los modelos M14 y M1A, cuenta con especificaciones de 3" de largo, .862" de diámetro y un peso de 4.3 oz.

Atributos

Acabado: Manganese Phosphate Calibre: 30 Caliber (.308) Hacer: Springfield Material: Stainless Steel Modelo: M14,M1A Rosca: .595-32 Talla: .862 Peso de entrega: 0,136kg Altura de envío: 23mm Ancho de envío: 25mm Longitud de envío: 94mm

Detalles del artículo

Hecho en USA

Mejora tu tiro con el M14 Muzzle Brake de Springfield. Reduce el retroceso 🎯 y mejora el control sin complicaciones. ¡Practica más y disfruta más!

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

Más...

Control de Retroceso y Cañón de Fácil Instalación; Compatible con M14/M1A's Nacionales y Chinos

Nota: NO es compatible con Norinco/Polytech (M305) con rosca M15x.75.

ESPECIFICACIONES: Acero mecanizado, acabado en fosfato de manganeso. 3" (7.6cm) de largo, .862" (21mm) de diámetro, peso de 4.3 oz. (123 g.)

Más...

Evaluaciones de clientes para SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 3,9

Great Product (22/12/2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08/03/2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19/10/2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11/04/2014)

Disappointing (08/08/2015)

VERY DISAPPOINTED (03/11/2016)

Settled down the recoil (17/11/2017)

Leer 7 mas calificaciones en brownells.com

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

Evaluaciones de clientes para SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

SMITH ENTERPRISE SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

Evaluaciones de clientes para SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER