Gives an instant check to make sure the gun is perfectly level for every shot, so every shot goes where it's aimed. If you sighted in carefully at 100 yards with the crosshairs level, then canted the gun just six degrees you'd move the next shot over 1/2". Not much, but enough to completely miss a small target, or wound a larger one. The problem gets worse at longer ranges. Clamp the ACD on the scope tube where it's visible to the non-sighting eye.
SPECS: Aluminum. Black or silver, anodized, matte finish. Available for 1" or 30mm scopes.
Más...
Mantente en el Objetivo, Disparo Tras Disparo
Ofrece una verificación instantánea para asegurar que el arma está perfectamente nivelada en cada disparo, de modo que cada tiro llegue exactamente donde se apunta. Si ajustaste cuidadosamente a 100 yardas con las retículas niveladas, y luego inclinaste el arma solo seis grados, moverías el siguiente tiro más de 1/2". No parece mucho, pero es suficiente para fallar completamente un objetivo pequeño o herir uno más grande. El problema empeora a distancias más largas. Coloca el ACD en el tubo del visor donde sea visible para el ojo que no está apuntando.
ESPECIFICACIONES: Aluminio. Negro o plateado, anodizado, acabado mate. Disponible para visores de 1" o 30mm.
Más...
Evaluaciones de clientes para MOUNTING SOLUTIONS PLUS 34MM BLACK ANTI CANT DEVICE
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,5
Well made but a little hard to see(02/03/2010)
This is a beautifully made part that actually has better fit and finish than most scope mounting rings. It has a high quality finish and the fasteners are excellent. However, it is somewhat hard to see with the non-scope eye because it must be positioned on TOP of the scope. One of the other brands that Brownells offers mounts on the side of the scope, but requires a dedicated mounting base. The MWG unit easily mounts to the scope tube and gives you the chance to get the rifle straight (less cant) before firing. I don't think it would be useful in off-hand shooting, but for bench rest and testing, it is wonderful and durable. I ordered three more after trying the first one. This one is high quality metal, not plastic, and will last forever.
can't see it, so can't use it. (08/10/2015)
Although it seams to be good quality, I find it hard to determine how you could actually use it. When mounted to my Leupold VX-3 when you are looking through the scope, you just can't see it with either eye.
Useful Accessory (08/01/2016)
Have not fired the rifle with it installed. However, after dry firing off a bipod and shooting sticks, I think it will be useful and practicable even though it is a little hard to see with the non shooting eye. I don't want a level that protrudes from the scope.Two criticisms - The screws are installed from the bottom (why?) which makes it harder to install the level than it would be otherwise. I would like to see the sharp corners rounded. Noting the aforementioned criticisms, I would recommend it to friends and associates.
Product failed to work.(02/07/2017)
One of the screw holes was stripped. It is too small to fit a 1 inch scope.
N.º de producto: 749008955 MOUNTING SOLUTIONS PLUS 34MM BLACK ANTI CANT DEVICE Ref Fabricante: ACD 34MM BLACK Ofrece una verificación instantánea para asegurar que el arma está perfectamente nivelada en cada disparo, de modo que cada tiro llegue exactamente donde se apunta. Si ajustaste cuidadosamente a 100 yardas con las retículas niveladas, y luego inclinaste el arma solo seis grados, moverías el siguiente tiro más de 1/2". No parece mucho, pero es suficiente para fallar completamente un objetivo pequeño o herir uno más grande. El problema empeora a distancias más largas. Coloca el ACD en el tubo del visor donde sea visible para el ojo que no está apuntando.
El ANTI CANT DEVICE asegura que el arma esté perfectamente nivelada en cada disparo, mejorando la precisión.
Se monta en el tubo del visor de 34mm, disponible en acabado negro.
Fabricado en aluminio anodizado, está disponible en negro o plateado y en tamaños de 1" o 30mm.
Atributos
Acabado:
Black
Tamaño tubo:
34mm
Peso de entrega: 0,045kgAltura de envío: 8mmAncho de envío: 109mmLongitud de envío: 142mm
Detalles del artículo
Hecho en USA
N.º de producto: 556200030 MOUNTING SOLUTIONS PLUS 30MM BLACK ANTI CANT DEVICE Ref Fabricante: LOPA30010855426005203 Ofrece una verificación instantánea para asegurar que el arma está perfectamente nivelada en cada disparo, de modo que cada tiro llegue exactamente donde se apunta. Si ajustaste cuidadosamente a 100 yardas con las retículas niveladas, y luego inclinaste el arma solo seis grados, moverías el siguiente tiro más de 1/2". No parece mucho, pero es suficiente para fallar completamente un objetivo pequeño o herir uno más grande. El problema empeora a distancias más largas. Coloca el ACD en el tubo del visor donde sea visible para el ojo que no está apuntando.
N.º de producto: 556200100 MOUNTING SOLUTIONS PLUS 1" BLACK ANTI CANT DEVICE Ref Fabricante: LOPA10010 Ofrece una verificación instantánea para asegurar que el arma está perfectamente nivelada en cada disparo, de modo que cada tiro llegue exactamente donde se apunta. Si ajustaste cuidadosamente a 100 yardas con las retículas niveladas, y luego inclinaste el arma solo seis grados, moverías el siguiente tiro más de 1/2". No parece mucho, pero es suficiente para fallar completamente un objetivo pequeño o herir uno más grande. El problema empeora a distancias más largas. Coloca el ACD en el tubo del visor donde sea visible para el ojo que no está apuntando.
Gives an instant check to make sure the gun is perfectly level for every shot, so every shot goes where it's aimed. If you sighted in carefully at 100 yards with the crosshairs level, then canted the gun just six degrees you'd move the next shot over 1/2". Not much, but enough to completely miss a small target, or wound a larger one. The problem gets worse at longer ranges. Clamp the ACD on the scope tube where it's visible to the non-sighting eye.
SPECS: Aluminum. Black or silver, anodized, matte finish. Available for 1" or 30mm scopes.
Más...
Mantente en el Objetivo, Disparo Tras Disparo
Ofrece una verificación instantánea para asegurar que el arma está perfectamente nivelada en cada disparo, de modo que cada tiro llegue exactamente donde se apunta. Si ajustaste cuidadosamente a 100 yardas con las retículas niveladas, y luego inclinaste el arma solo seis grados, moverías el siguiente tiro más de 1/2". No parece mucho, pero es suficiente para fallar completamente un objetivo pequeño o herir uno más grande. El problema empeora a distancias más largas. Coloca el ACD en el tubo del visor donde sea visible para el ojo que no está apuntando.
ESPECIFICACIONES: Aluminio. Negro o plateado, anodizado, acabado mate. Disponible para visores de 1" o 30mm.
Más...
Evaluaciones de clientes para MOUNTING SOLUTIONS PLUS 34MM BLACK ANTI CANT DEVICE
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,5
Well made but a little hard to see(02/03/2010)
This is a beautifully made part that actually has better fit and finish than most scope mounting rings. It has a high quality finish and the fasteners are excellent. However, it is somewhat hard to see with the non-scope eye because it must be positioned on TOP of the scope. One of the other brands that Brownells offers mounts on the side of the scope, but requires a dedicated mounting base. The MWG unit easily mounts to the scope tube and gives you the chance to get the rifle straight (less cant) before firing. I don't think it would be useful in off-hand shooting, but for bench rest and testing, it is wonderful and durable. I ordered three more after trying the first one. This one is high quality metal, not plastic, and will last forever.
can't see it, so can't use it. (08/10/2015)
Although it seams to be good quality, I find it hard to determine how you could actually use it. When mounted to my Leupold VX-3 when you are looking through the scope, you just can't see it with either eye.
Useful Accessory (08/01/2016)
Have not fired the rifle with it installed. However, after dry firing off a bipod and shooting sticks, I think it will be useful and practicable even though it is a little hard to see with the non shooting eye. I don't want a level that protrudes from the scope.Two criticisms - The screws are installed from the bottom (why?) which makes it harder to install the level than it would be otherwise. I would like to see the sharp corners rounded. Noting the aforementioned criticisms, I would recommend it to friends and associates.
Product failed to work.(02/07/2017)
One of the screw holes was stripped. It is too small to fit a 1 inch scope.