The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro
El soporte de óptica offset Arisaka, con patente pendiente, es una solución de montaje modular que permite al usuario seleccionar una posición de offset de 35 o 45 grados para una mira red dot sin necesidad de componentes adicionales. La posición de 35 grados acerca la mira red dot a visores más delgados y pequeños, mientras que la posición de 45 grados proporciona mayor espacio alrededor de torretas más anchas o visores de mayor aumento. El soporte de óptica offset Arisaka está diseñado para ser montado en la riel Picatinny superior de un rifle AR15. Cuando el rifle se inclina para utilizar la mira red dot offset, el óptico permanece centrado sobre el cañón y mantiene una altura de co-witness de 1/3 más baja. La base y las placas ópticas se pueden invertir, permitiendo su uso en el lado izquierdo o derecho. La base y las placas se pueden comprar por separado o como combinación, ofreciendo una opción de actualización en el futuro a medida que los usuarios adquieran nuevas miras red dot. Peso: 1.9 oz sin óptica. Longitud: 1.0" para la base, que ocupa tres ranuras Picatinny (dos lengüetas de retroceso y tornillo de sujeción). Altura: La base se sitúa a 0.180" por encima de la superficie de la riel Picatinny. El soporte está mecanizado CNC a partir de aluminio 6061-T6 y anodizado con recubrimiento duro MIL-A-8625 Tipo III. Se incluyen controladores de bits Torx Plus IP20 e IP27 con cada base. Altura estándar (para montajes de visores de 1.5" a 1.8"): Placa 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Placa 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Placa 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Placa 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (no 5X), Holosun HS403 (no A), HS503, HS515, HS530 Placa 6: Aimpoint Acro Altura alta (1.9" a 2.2" para montajes de visores): Placa 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Placa 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Placa 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Placa 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (no 5X), Holosun HS403 (no A), HS503, HS515, HS530 Placa 12: Aimpoint Acro