Low silhouette, all steel front sight with eight interchangeable sight inserts that are locked into place by threaded cap. Sight includes insert set.
SPECS: Sight tube- 9/16" (14.3mm) dia.. Dovetail base is 3/8" (9.5mm) wide for standard dovetail. Use 17AML with 57SML Receiver sight. 17 ATC is for use with factory vernier tang sight on T/C muzzleloaders. 17AEU fits European 9mm (nominal .360Ó x .070Ó) dovetail. HEIGHT is from bottom of dovetail to center of aperture.
Más...
Bajo Perfil, Todo en Acero con Siete Insertos
Mira delantera de bajo perfil, toda en acero, con ocho insertos intercambiables de mira que se aseguran en su lugar mediante una tapa roscada. La mira incluye el conjunto de insertos.
ESPECIFICACIONES: Tubo del visor - 9/16" (14.3mm) de diámetro. La base de cola de milano mide 3/8" (9.5mm) de ancho para cola de milano estándar. Utiliza 17AML con la mira receptora 57SML. 17 ATC es para uso con mira tang vernier de fábrica en armas de avancarga T/C. 17AEU se ajusta a la cola de milano europea de 9mm (nominal .360Ó x .070Ó). La ALTURA es desde la parte inferior de la cola de milano hasta el centro de la apertura.
Más...
Evaluaciones de clientes para LYMAN .404" TARGET FRONT SIGHT 17 AHB STEEL BLACK
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
45/70 buffalo classic(30/01/2012)
I have a H&R buffalo clasic in 45/70 with a williams rear sight this sight allowed me to lower the rear sight enough to give me room for eleavation for longer shots if so i chose to
Perfect Fit on Henry H001T Series(27/04/2012)
On my Henry H001TV, I replaced the original Marbles Bead front sight with this Lyman 17A-HB Globe sight. It took some minor filing on the sight dovetail base to get a nice fit into the barrel dovetail, yet this is normal. The sight works great with the Marbles Tang Peep Sight I also have mounted for a rear sight. The inserts that came with the 17A-HB were somewhat course or fat, so I upgraded to a set of Lee Shaver inserts for the 17A. These are finer and provide a better front sight picture by obscuring less of the target. The sight is well made, smooth surface with nice bluing.
N.º de producto: 539017360 LYMAN .404" TARGET FRONT SIGHT 17 AHB STEEL BLACK Ref Fabricante: 3171076011516310767 Mira delantera de bajo perfil, toda en acero, con ocho insertos intercambiables de mira que se aseguran en su lugar mediante una tapa roscada. La mira incluye el conjunto de insertos.
Low silhouette, all steel front sight with eight interchangeable sight inserts that are locked into place by threaded cap. Sight includes insert set.
SPECS: Sight tube- 9/16" (14.3mm) dia.. Dovetail base is 3/8" (9.5mm) wide for standard dovetail. Use 17AML with 57SML Receiver sight. 17 ATC is for use with factory vernier tang sight on T/C muzzleloaders. 17AEU fits European 9mm (nominal .360Ó x .070Ó) dovetail. HEIGHT is from bottom of dovetail to center of aperture.
Más...
Bajo Perfil, Todo en Acero con Siete Insertos
Mira delantera de bajo perfil, toda en acero, con ocho insertos intercambiables de mira que se aseguran en su lugar mediante una tapa roscada. La mira incluye el conjunto de insertos.
ESPECIFICACIONES: Tubo del visor - 9/16" (14.3mm) de diámetro. La base de cola de milano mide 3/8" (9.5mm) de ancho para cola de milano estándar. Utiliza 17AML con la mira receptora 57SML. 17 ATC es para uso con mira tang vernier de fábrica en armas de avancarga T/C. 17AEU se ajusta a la cola de milano europea de 9mm (nominal .360Ó x .070Ó). La ALTURA es desde la parte inferior de la cola de milano hasta el centro de la apertura.
Más...
Evaluaciones de clientes para LYMAN .404" TARGET FRONT SIGHT 17 AHB STEEL BLACK
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
45/70 buffalo classic(30/01/2012)
I have a H&R buffalo clasic in 45/70 with a williams rear sight this sight allowed me to lower the rear sight enough to give me room for eleavation for longer shots if so i chose to
Perfect Fit on Henry H001T Series(27/04/2012)
On my Henry H001TV, I replaced the original Marbles Bead front sight with this Lyman 17A-HB Globe sight. It took some minor filing on the sight dovetail base to get a nice fit into the barrel dovetail, yet this is normal. The sight works great with the Marbles Tang Peep Sight I also have mounted for a rear sight. The inserts that came with the 17A-HB were somewhat course or fat, so I upgraded to a set of Lee Shaver inserts for the 17A. These are finer and provide a better front sight picture by obscuring less of the target. The sight is well made, smooth surface with nice bluing.