Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

RANCH PRODUCTS
10/22® EXTENDED MAGAZINE RELEASE

746122100

Compact Shape Is Faster To Hit; Won't Get In The Way

Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.

SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.

Más...

Forma Compacta Más Rápida de Accionar; No Estorba

Se extiende media pulgada más que el liberador de cargador "al ras" de fábrica, por lo que es más fácil de presionar y operar cuando tienes prisa por cambiar los cargadores. Su forma delgada y compacta no te molestará en la espalda si llevas tu rifle en una bandolera. Se instala sin necesidad de un armero.

ESPECIFICACIONES: Acero CM, azul, acabado mate. Se extiende 0.430" (11mm) desde la parte inferior del receptor.

Más...

Evaluaciones de clientes para RANCH PRODUCTS BLUE EXTENDED MAG RELEASE

Número de evaluaciones: 12
De brownells.com: 12
Evaluación media: 4,3

10/22 SS Ext. Mag Release (02/10/2011)

Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?

Work's great (10/04/2010)

Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.

Size is decieving (28/08/2010)

When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.

Very good for older 10/22's (10/09/2010)

Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?

Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.

Working as expected (02/02/2011)

Easy to install and works like expected.

vast improvement over stock mag. release (18/06/2011)

This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.

Greatly eases releasing a magazine (19/10/2011)

Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key.
This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free.
Basically how the factory release should be, I highly recommend this to anyone with a 10/22.

Great product! (13/06/2012)

It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.

Great design, will last a lifetime (04/01/2014)

All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.

What was looking for (29/11/2016)

Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory

Much needed upgrade (20/02/2017)

Solid replacement for the flimsy plastic and far too small original release.

Easy to swap out and SOLID.

Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.

A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.

Works well, but dimensions are small. (05/09/2018)

Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.

Leer 12 mas calificaciones en brownells.com

39.9 39.9 1 EUR

N.º de producto: 746122100
RANCH PRODUCTS BLUE EXTENDED MAG RELEASE
Ref Fabricante: NONE Se extiende media pulgada más que el liberador de cargador "al ras" de fábrica, por lo que es más fácil de presionar y operar cuando tienes prisa por cambiar los cargadores. Su forma delgada y compacta no te molestará en la espalda si llevas tu rifle en una bandolera. Se instala sin necesidad de un armero.

39.9 EUR 24 39,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: Ruger Modelo: 10/22

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El liberador de cargador se extiende media pulgada más que el de fábrica, facilitando su uso en situaciones de prisa.
Su diseño delgado y compacto no molesta al llevar el rifle en una bandolera.
Instalación sencilla sin necesidad de un armero.

Atributos

Hacer: Ruger Modelo: 10/22 Peso de entrega: 0,023kg Altura de envío: 13mm Ancho de envío: 18mm Longitud de envío: 94mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Mejora tu 10/22® con el liberador de cargador extendido de RANCH PRODUCTS. 🚀 Más fácil de usar y sin complicaciones al instalar.

Compact Shape Is Faster To Hit; Won't Get In The Way

SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.

Más...

Forma Compacta Más Rápida de Accionar; No Estorba

ESPECIFICACIONES: Acero CM, azul, acabado mate. Se extiende 0.430" (11mm) desde la parte inferior del receptor.

Más...

Evaluaciones de clientes para RANCH PRODUCTS BLUE EXTENDED MAG RELEASE

Número de evaluaciones: 12
De brownells.com: 12
Evaluación media: 4,3

10/22 SS Ext. Mag Release (02/10/2011)

Work's great (10/04/2010)

Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.

Size is decieving (28/08/2010)

When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.

Very good for older 10/22's (10/09/2010)

Working as expected (02/02/2011)

Easy to install and works like expected.

vast improvement over stock mag. release (18/06/2011)

This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.

Greatly eases releasing a magazine (19/10/2011)

Great product! (13/06/2012)

It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.

Great design, will last a lifetime (04/01/2014)

What was looking for (29/11/2016)

Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory

Much needed upgrade (20/02/2017)