Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

VOLQUARTSEN
RUGER® 10/22® TRIGGER GUARD 2000

810162010911 930000003

Machined Billet Housing Drops In For Precise, Consistent Trigger Pull

Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002". Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action job. Includes auto bolt release and extended magazine release.

SPECS: Aluminum housing, anodized black or silver, matte finish. Hammer - 440C stainless steel, hardened to Rc 58-59. Sear - A2 tool steel, Rc 60. Ship wt. 2 lb.

Más...

Carcasa de Billet Mecanizado se Instala para un Tirón del Gatillo Preciso y Constante

Completamente nuevo, carcasa de gatillo mecanizada CNC con partes de gatillo EDM de precisión, todas pre-montadas y listas para instalar, para obtener un tirón del gatillo nítido y limpio. El disparador y el desconector EDM endurecidos tienen tolerancias mantenidas a +/- .0002". El martillo de acero inoxidable endurecido tiene muescas rectificadas en superficie para lograr los ángulos de enganche correctos, ofreciendo un rendimiento duradero. Los resortes del martillo y del disparador de potencia reducida aligeran el tirón. El gatillo incluye ajuste de sobre-recorrido. El émbolo del gatillo endurecido y pulido se reposiciona para presionar directamente hacia atrás a medida que se tira del gatillo; el resorte del émbolo está rediseñado para una mejor respuesta. Los pasadores del martillo, disparador y acción sobredimensionados eliminan la holgura que arruina un trabajo de acción excelente. Incluye liberación automática del cerrojo y liberación extendida del cargador.

ESPECIFICACIONES: Carcasa de aluminio, anodizada en negro o plata, acabado mate. Martillo - acero inoxidable 440C, endurecido a Rc 58-59. Disparador - acero de herramientas A2, Rc 60. Peso de envío 2 lb.

Más...

Evaluaciones de clientes para VOLQUARTSEN FITS .22 LONG RIFLE, SILVER

Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4,4

Great Drop-in Trigger (28/02/2013)

No instructions, but trigger module installs just like the Timney Trigger Module except this one has no allenhead screws to install or adjust. Volquartsen may have instructions on their website, but I could not find any. Anyway, an easy install and a super light, smooth trigger for a Ruger 10/22! Brownells Tech Support is always helpful too. I would not hesitate to recommend this trigger to anyone wanting to dramatically improve their stock Ruger 10/22 trigger.

GREAT TRIGGER (10/07/2013)

SUPER EASY to install, GOOD RESULTS should have replaced it earlier.

Excellent Drop-in (18/04/2010)

This will give you the nicest trigger you have ever experienced in a 10/22. Light, crisp, no overtravel. Huge upgrade and well worth the money

Dramaticaly over priced & dissapointing (22/09/2010)

I was very excited to receive this part because it completed a bench rest gun I was building. before I got this part, I was using a Standard trigger group from Ruger with a trigger job & extended mag release. Once I used the Volquarsen trigger group, I realized it didn't do anything my standard trigger group didn't do. Trigger pull wasn't any better, accuracy wasn't better, and IMHO it didn't look any better. In addition, a few of the pins holding the group together were very loose and kept falling out. lastly, the ejector had to be filled down in order for the gun to function reliably. Not what I expected on a drop in unit.

I would recommend anyone wanting a nice trigger group for a 10/22 simply buy a new Ruger factory group, add an extended mag release and have a competent gunsmith do a trigger job on it.

fantastic (01/10/2011)

It arrived, it fit easily and it created a trigger easily as good as many of my bolt action target rifles. AMAZING

Not cheap but it is just so good, I would have at least 5000 rounds through mine now and it has never changed, crisp and light with a short return for fast follow up. Totally reliable.

I have bought a number of products from Volquartsen and their production quality has always been great. I hesitated on this item as it is expensive but it is truly woht the $ once installed.

Excellent drop in replacement.. (06/04/2012)

Perfect fit and crisp break, one of the best triggers I have. I will buy another one.

I was surprised (29/03/2013)

How I use the product: I have been building and shooting the 10/22 for several years. I recently purchased the Volquartsen trigger to build a target rifle. I have been able to easily shoot 250 yards and hit my targets. I was able to do so with the stock trigger but the new unit has taken my shooting and accuracy to an entire new level. Before I was using luck to hit my target in regards to the trigger consistency; now I have a sure thing each and every time I pull the trigger. Consistency is an important thing for me and this trigger delivers it each and every pull.

Things that are great about the product: I have been looking for a new trigger for many months if not years and I recently decided to purchase the Volquartsen trigger for my 10/22. I was somewhat concerned about the negative review posted on this site but chose to follow my gut and purchase it anyways. Once it arrived I immediately stripped down my rifle and put this one in. The unit was a direct replacement from the factory unit it replaced. I was even able to use my Tactical Solutions extended magazine release one this new unit. The trigger pull is a night and day difference. Major improvements compared to the factory set up. I experienced a light, clean and smooth trigger break that had little to no creep straight out of the box. This unit does have adjustments to reduce the creep even more, but I have found it unnecessary due to great settings already. I also found the new trigger to be wider for my finger to allow better finger to trigger feel and placement. This was a nice feature to enhance the comfort of the shooter. The auto bolt release is another nice feature they've added. The factory bolt release was a chore (at times) to release, Volquartsen upgraded this so a simple pull back of the bolt and it will close and function normally. This isn't a huge time saver but it is nice none the less. Overall this is a great product and I WILL purchase another one on my next build!

Things that are not so great about the product: I had little to say about the negatives on this product. Like any quality trigger, you're going to spend some money. The one issue I did have: the pins that hold the internals (springs, hammer, etc.) in were somewhat loose and attempted to fall out while the unit was out of the gun and tipped on its side. This was not an issue once installed on the gun but found it noteworthy for my review.

Leer 7 mas calificaciones en brownells.com

419.9 419.9 2 EUR

N.º de producto: 930000003
VOLQUARTSEN FITS .22 LONG RIFLE, SILVER
Ref Fabricante: VCTP-1-S-10 810162010911 Completamente nuevo, carcasa de gatillo mecanizada CNC con partes de gatillo EDM de precisión, todas pre-montadas y listas para instalar, para obtener un tirón del gatillo nítido y limpio. El disparador y el desconector EDM endurecidos tienen tolerancias mantenidas a +/- .0002". El martillo de acero inoxidable endurecido tiene muescas rectificadas en superficie para lograr los ángulos de enganche correctos, ofreciendo un rendimiento duradero. Los resortes del martillo y del disparador de potencia reducida aligeran el tirón. El gatillo incluye ajuste de sobre-recorrido. El émbolo del gatillo endurecido y pulido se reposiciona para presionar directamente hacia atrás a medida que se tira del gatillo; el resorte del émbolo está rediseñado para una mejor respuesta. Los pasadores del martillo, disparador y acción sobredimensionados eliminan la holgura que arruina un trabajo de acción excelente. Incluye liberación automática del cerrojo y liberación extendida del cargador.

419.9 EUR 5 419,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: Ruger Modelo: 10/22

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Carcasa de gatillo mecanizada CNC con partes de gatillo EDM de precisión, pre-montadas y listas para instalar.
Martillo de acero inoxidable endurecido con muescas rectificadas en superficie para ángulos de enganche correctos y rendimiento duradero.
Incluye liberación automática del cerrojo y liberación extendida del cargador, mejorando la funcionalidad del arma.

Atributos

Hacer: Ruger Modelo: 10/22 Peso de entrega: 0,181kg Altura de envío: 28mm Ancho de envío: 86mm Longitud de envío: 145mm UPC : 810162010911

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.c

N.º de producto: 930000001
VOLQUARTSEN FITS .22 LONG RIFLE, BLACK
Ref Fabricante: VCTP-1-B-10 810162010904 Completamente nuevo, carcasa de gatillo mecanizada CNC con partes de gatillo EDM de precisión, todas pre-montadas y listas para instalar, para obtener un tirón del gatillo nítido y limpio. El disparador y el desconector EDM endurecidos tienen tolerancias mantenidas a +/- .0002". El martillo de acero inoxidable endurecido tiene muescas rectificadas en superficie para lograr los ángulos de enganche correctos, ofreciendo un rendimiento duradero. Los resortes del martillo y del disparador de potencia reducida aligeran el tirón. El gatillo incluye ajuste de sobre-recorrido. El émbolo del gatillo endurecido y pulido se reposiciona para presionar directamente hacia atrás a medida que se tira del gatillo; el resorte del émbolo está rediseñado para una mejor respuesta. Los pasadores del martillo, disparador y acción sobredimensionados eliminan la holgura que arruina un trabajo de acción excelente. Incluye liberación automática del cerrojo y liberación extendida del cargador.

419.9 EUR 14 419,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: Ruger Modelo: 10/22

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Carcasa de gatillo mecanizada CNC con partes de gatillo EDM de precisión, todas pre-montadas y listas para instalar.
Martillo de acero inoxidable endurecido con muescas rectificadas en superficie para lograr los ángulos de enganche correctos, ofreciendo un rendimiento duradero.
Incluye liberación automática del cerrojo y liberación extendida del cargador, con pasadores sobredimensionados que eliminan la holgura.

Atributos

Hacer: Ruger Modelo: 10/22 Peso de entrega: 0,204kg Altura de envío: 36mm Ancho de envío: 86mm Longitud de envío: 145mm UPC : 810162010904

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.c

Mejora tu Ruger 10/22 con el Trigger Guard de Volquartsen. 🎯 Instalación fácil y tirón limpio para un rendimiento excepcional.

Machined Billet Housing Drops In For Precise, Consistent Trigger Pull

SPECS: Aluminum housing, anodized black or silver, matte finish. Hammer - 440C stainless steel, hardened to Rc 58-59. Sear - A2 tool steel, Rc 60. Ship wt. 2 lb.

Más...

Carcasa de Billet Mecanizado se Instala para un Tirón del Gatillo Preciso y Constante

Más...