Mantiene el resorte principal alineado, evitando torceduras y atascos para un golpe de martillo consistente.
Preensamblado con un resorte de martillo Wolff de 17 libras y listo para instalar, ahorrando tiempo y esfuerzo.
Compatible con Blackhawk, Super Blackhawk y Old Vaquero, pero no adecuado para New Vaquero.
Atributos
Modelo:Blackhawk
Tipo de arma:Ruger
Peso de entrega:0,023kg
Altura de envío:5mm
Ancho de envío:76mm
Longitud de envío:175mm
UPC:050806104952
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Especificaciones:
Hacer: Ruger
Modelo: Blackhawk
42.942.91EUR
42.9EUR42,90 €
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.
N.º de producto: 078000019
050806104952 Mantiene el resorte principal alineado, previene el torcimiento y el bloqueo del resorte para un descenso del martillo consistente y una mejor ignición. La estructura redonda ayuda a proporcionar una sensación más suave y que inspira confianza al amartillar. Ahorra tiempo y esfuerzo, elimina el limado y pulido necesarios para quitar las rebabas y bordes ásperos de la pieza estampada de fábrica. Viene preensamblada con un resorte de martillo Wolff de 17 libras y lista para instalar.
Pedido pendiente
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Holds mainspring in alignment, prevents spring kink and binding for consistent hammer drop and improved ignition. Round strut helps provide a confidence-inspiring, smoother feel when cocking. Saves time and effort, eliminates the filing and polishing necessary to remove the burrs and rough edges on the stamped, factory part. Pre-assembled with a 17 pound Wolff hammer spring and ready to drop in.
Proporciona un Amartillado Más Suave y un Descenso de Martillo Consistente
Mantiene el resorte principal alineado, previene el torcimiento y el bloqueo del resorte para un descenso del martillo consistente y una mejor ignición. La estructura redonda ayuda a proporcionar una sensación más suave y que inspira confianza al amartillar. Ahorra tiempo y esfuerzo, elimina el limado y pulido necesarios para quitar las rebabas y bordes ásperos de la pieza estampada de fábrica. Viene preensamblada con un resorte de martillo Wolff de 17 libras y lista para instalar.
Top takeaways
Mantiene el resorte principal alineado, evitando torceduras y atascos para un golpe de martillo consistente.
Preensamblado con un resorte de martillo Wolff de 17 libras y listo para instalar, ahorrando tiempo y esfuerzo.
Compatible con Blackhawk, Super Blackhawk y Old Vaquero, pero no adecuado para New Vaquero.
Atributos
Modelo:Blackhawk
Tipo de arma:Ruger
Peso de entrega:0,023kg
Altura de envío:5mm
Ancho de envío:76mm
Longitud de envío:175mm
UPC:050806104952
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Opiniones de clientes
Calificaciones de clientes (3)
5 / 5
Claramente recomendable
Works great! Drop In Part 29/11/2010
This part works great. I have a limited edition "Flat Top" Bisley .44 special. The stock mainspring was way to heavy resulting in a significant effort to work the hammer back along with heavy hammer fall that tends to jar the sight alignment on impact to the firing pin. This drop in part works as advertised---easy to install and makes a big difference in level of effort to work the hammer and smoothness of the hammer fall. I've had no issues with "light strikes" I handload all my ammo with Federal primers. Combine this part with a Wolff 30 ounce trigger return spring and you'll have a decent trigger. Buyer beware--this part may not work on the limited edition XR-3 frames with the modular trigger lock inside the grip frame.
Claramente recomendable
Should be factory standard! 09/02/2010
Bought this to replace the Ruger factory part that was a joke. The head of the strut was poorly ground and had flat facets on it. I made an attempt to smooth it, and it did help some, it was still somewhat "gritty" feeling when cocking. I also didn't care for the wear patterns of the flat shank that the spring rode upon. This Brownell's part having a smooth consistent finish over the entire part has made a world of difference in and of itself. The head is smooth and well polished which aids in smooth, consistent cocking. The body being well rounded has no edges or corners to snag the spring improving the overal general feel of the revolver. My trigger pull has gone from a gritty 5 lbs to a crisp, clean 3.5 lbs. Cocking the revolver is smooth and easy though for my tastes the 17lb spring is a bit light. I replaced it with a 19lb Power Custom spring. I have been tempted to try out the factory spring to see how smooth it feels.
Claramente recomendable
Easiest upgrade for New Model Blackhawks 24/08/2009
Being a captured spring, removal of the old and installation of the new is easy. A tiny drop of oil on the round end where it meets the hammer helps. Still plenty of spring power compared to the stock 24 pound spring to reliably ignite the hard primers of .45ACP GI rounds. This will also take off about 2 pounds of trigger pull due to reduced pressure on the sear surfaces.
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
Vistos recientemente
¡Ups! Algo salió mal.
Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.
Mejora tu Ruger® con el Hammer Strut de Brownells. 🔧 Fácil instalación y rendimiento superior para un disparo más confiable.
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.