Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

JOHN MASEN
SEMI-AUTO RIFLE RECOIL PAD

560153808

Extra-Length Plus No-Slip Surface

Increases stock length to better fit shooters with long arms. Provides a cushioned, recoil absorbing, non-slip surface. Replaces original pad with no permanent alterations. AR-15/M16 model fits A-1 and A-2 trap door buttstocks; adds ¾" length. CAR-15 model fits collapsible stock; adds ¾". M14/M1A adds 7/8". Ruger® model fits 10/22®, Mini-Thirty®, Model 96™, does not fit Mini-14 with serial numbers begining at 580 and higher.

SPECS: Polyethylene rubber, black. Serrated face.

Más...

Longitud Extra y Superficie Antideslizante

Aumenta la longitud de la culata para adaptarse mejor a tiradores con brazos largos. Proporciona una superficie acolchada, que absorbe el retroceso y antideslizante. Reemplaza la almohadilla original sin alteraciones permanentes. El modelo para AR-15/M16 se ajusta a las culatas con puerta trampa A-1 y A-2; añade ¾" de longitud. El modelo para CAR-15 se ajusta a la culata plegable; añade ¾". El modelo para M14/M1A añade 7/8". El modelo Ruger® se ajusta a 10/22®, Mini-Thirty®, Model 96™, no es compatible con Mini-14 con números de serie que comienzan en 580 o superiores.

ESPECIFICACIONES: Caucho de polietileno, negro. Superficie serrada.

Más...

Evaluaciones de clientes para JOHN MASEN M14/M1A RECOIL PAD

Número de evaluaciones: 14
De brownells.com: 14
Evaluación media: 2

This is a GOOD product (28/05/2010)

I had to do a little fitting (I expected that)
and I love it!

waste of money (03/07/2012)

No matter how much trimming and filling I did this thing would not fit well on my USGI stock. Ended up in the garbage.

Ruger Mini-14 Pad Does Not Fit Model 580 (21/07/2010)

It was a very nice looking pad, but it does not fit my Ruger Mini 14 Model 580 Ranch Rifle.

10-22 and model 96 recoil pad (20/08/2010)

I have had one of these on my 10-22 for a few years, i recently purchased a Model 96 in 44mag, the fit up on both guns is excelent, especially for a long armed person like me.

Adds Length of Pull (19/10/2011)

Dense rubber does add in some recoil absorption. I bought this pad to increase my length of pull and to remove the uncomfortable factory hard plastic plate. The pad gives good grip to the shoulder without being overly gripping and grabbing clothing during carry.
The pad is oversized for the 10/22, and will need to be ground down on the sides to fit flush. I like the extra material, so I did not do this step. Otherwise the pad is fitted very well to the 10/22 and attaches securely.

It fit my needs perfectly. But I gave 4 stars for the possible trimming some will want to do.

It's an extention, not a true recoil pad (23/01/2012)

This was installed on a Ruger 99/44 Deerfield .44 Mag carbine.

Let's get right to the biggest wart about this product... as others have said, it is NOT a soft recoil dampening pad like a Pachmayr, it is hard rubber with hardly (if any) any give.

It does a great job in adding length to the "shorty" Ruger carbine stocks, but it should be called/listed as a stock extension instead, and lose the "cushioned, recoil absorbing" claim from the product description.

Tip for installation, attach the top "leg" first, get it aligned with the screw hole and tighten down the screw.

Then you can pull and stretch the pad around and down the back of the stock to get the bottom screw to line up with the existing hole. If you do the bottom first, getting the top leg to fit properly is too difficult.

The pad is a bit oversize and extends between 1/32 - 1/16" from the rest of the stock... others have chosen to leave it that way, I'm going to go through the exercise of fitting like any other after market pad.

Nonsense (27/08/2014)

This doesn't come anywhere close to actually fitting a Mini 30. Not even close. I can't understand how it would be difficult to make a pad that fit. Absolutely silly nonsense.

Old-school Solution, Rather 50% Of One (29/07/2018)

This is one of the original slip-on recoil pad designs. Note that it ONLY works with the flat-back CAR stock, not the angled "LE" style stock. That being said, it will generally slide right on and over. What this will NOT do is stay on properly. You'll want to route a ziptie through the sling loop and the middle of the stock to hold the pad on securely, or use copious amounts of adhesive.

If you want to add length of pull or tame the limb-destroying 'recoil' of a 5.56mm cartridge, this is a decent choice. I think a better stock would be my first upgrade, but for a 'retro' USASOC SMU build these are essential.

let down (13/08/2009)

stock screws pull through the pad ,too bad as is a good alt. for ar15 build project ,hope they can remedy problem

Worst product ever bought (28/08/2009)

Absolutely the worst product I have ever bought from Brownells. Top screw pulls through the rubber without ever tightening the buttstock to rifle. If sent to me free, I would not accept it given what I know now.
DO NOT BUY THIS!!!

Masen recoil pad (13/07/2010)

Same as everyone else top screw pulls through pad and it doesn't secure the A2 stock to the rifle. absolute junk, I wouldn't put it on an airsoft rifle.

Do not buy (06/12/2010)

Wish I had read the reviews before purchasing. Does not add .75 inches to stock, it is .75 thick, but the stock buttplate is .5 inches. So it would only add .25 inches. Also, as noted by other reviewers the screws pull through when tightened. Junk!

Very flawed design (14/02/2012)

Beware that the only thing holding your stock to the receiver will be this rubber butt pad. My customer bought this from me for his AR and after proper tightening the stock began twisting and this butt pad FELL OFF the rifle which in turn destroyed the rear take-down detent spring. Upon inspection the was a small, thin washer molded into the rubber that pulled out of the butt pad. I wouldn't trust this in the field or on the range.

JUNK PURE JUNK (19/03/2012)

Cant tighten this down because the screws pull through the rubber pad. This is junk! Dont waste your time or money.

Leer 14 mas calificaciones en brownells.com

28.9 36.9 4 EUR

N.º de producto: 560153808
JOHN MASEN M14/M1A RECOIL PAD
Ref Fabricante: BW08 Aumenta la longitud de la culata para adaptarse mejor a tiradores con brazos largos. Proporciona una superficie acolchada, que absorbe el retroceso y antideslizante. Reemplaza la almohadilla original sin alteraciones permanentes. El modelo para AR-15/M16 se ajusta a las culatas con puerta trampa A-1 y A-2; añade ¾" de longitud. El modelo para CAR-15 se ajusta a la culata plegable; añade ¾". El modelo para M14/M1A añade 7/8". El modelo Ruger® se ajusta a 10/22®, Mini-Thirty®, Model 96™, no es compatible con Mini-14 con números de serie que comienzan en 580 o superiores.

33.9 EUR 2 33,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Standard Material: Rubber

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Aumenta la longitud de la culata para adaptarse mejor a tiradores con brazos largos, proporcionando una superficie acolchada y antideslizante.
El modelo para M14/M1A añade 7/8" de longitud y reemplaza la almohadilla original sin alteraciones permanentes.
Fabricado en caucho de polietileno negro con superficie serrada, ofreciendo durabilidad y absorción del retroceso.

Atributos

Color: Black Estilo: Standard Material: Rubber Peso de entrega: 0,045kg Altura de envío: 13mm Ancho de envío: 56mm Longitud de envío: 135mm

Detalles del artículo

Hecho en USA

N.º de producto: 560153700
JOHN MASEN AR-15/M16 RECOIL PAD
Ref Fabricante: 1537 Aumenta la longitud de la culata para adaptarse mejor a tiradores con brazos largos. Proporciona una superficie acolchada, que absorbe el retroceso y antideslizante. Reemplaza la almohadilla original sin alteraciones permanentes. El modelo para AR-15/M16 se ajusta a las culatas con puerta trampa A-1 y A-2; añade ¾" de longitud. El modelo para CAR-15 se ajusta a la culata plegable; añade ¾". El modelo para M14/M1A añade 7/8". El modelo Ruger® se ajusta a 10/22®, Mini-Thirty®, Model 96™, no es compatible con Mini-14 con números de serie que comienzan en 580 o superiores.

29.9 EUR 2 29,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Standard Material: Rubber

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

N.º de producto: 560153800
JOHN MASEN CAR-15 RECOIL PAD
Ref Fabricante: BW1538 Aumenta la longitud de la culata para adaptarse mejor a tiradores con brazos largos. Proporciona una superficie acolchada, que absorbe el retroceso y antideslizante. Reemplaza la almohadilla original sin alteraciones permanentes. El modelo para AR-15/M16 se ajusta a las culatas con puerta trampa A-1 y A-2; añade ¾" de longitud. El modelo para CAR-15 se ajusta a la culata plegable; añade ¾". El modelo para M14/M1A añade 7/8". El modelo Ruger® se ajusta a 10/22®, Mini-Thirty®, Model 96™, no es compatible con Mini-14 con números de serie que comienzan en 580 o superiores.

28.9 EUR 55 28,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Standard Material: Rubber

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

N.º de producto: 560153807
JOHN MASEN RUGER RECOIL PAD
Ref Fabricante: BW07 Aumenta la longitud de la culata para adaptarse mejor a tiradores con brazos largos. Proporciona una superficie acolchada, que absorbe el retroceso y antideslizante. Reemplaza la almohadilla original sin alteraciones permanentes. El modelo para AR-15/M16 se ajusta a las culatas con puerta trampa A-1 y A-2; añade ¾" de longitud. El modelo para CAR-15 se ajusta a la culata plegable; añade ¾". El modelo para M14/M1A añade 7/8". El modelo Ruger® se ajusta a 10/22®, Mini-Thirty®, Model 96™, no es compatible con Mini-14 con números de serie que comienzan en 580 o superiores.

36.9 EUR 0 36,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Color: Black Estilo: Standard Material: Rubber

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Mejora tu tiro con el Recoil Pad John Masen M14/M1A. 🛡️ Aumenta la longitud y absorbe el retroceso para una mejor experiencia de disparo.

Extra-Length Plus No-Slip Surface

SPECS: Polyethylene rubber, black. Serrated face.

Más...

Longitud Extra y Superficie Antideslizante

ESPECIFICACIONES: Caucho de polietileno, negro. Superficie serrada.

Más...

Evaluaciones de clientes para JOHN MASEN M14/M1A RECOIL PAD

Número de evaluaciones: 14
De brownells.com: 14
Evaluación media: 2

This is a GOOD product (28/05/2010)

I had to do a little fitting (I expected that)
and I love it!

waste of money (03/07/2012)

No matter how much trimming and filling I did this thing would not fit well on my USGI stock. Ended up in the garbage.

Ruger Mini-14 Pad Does Not Fit Model 580 (21/07/2010)

It was a very nice looking pad, but it does not fit my Ruger Mini 14 Model 580 Ranch Rifle.

10-22 and model 96 recoil pad (20/08/2010)

I have had one of these on my 10-22 for a few years, i recently purchased a Model 96 in 44mag, the fit up on both guns is excelent, especially for a long armed person like me.

Adds Length of Pull (19/10/2011)

It's an extention, not a true recoil pad (23/01/2012)

Nonsense (27/08/2014)

This doesn't come anywhere close to actually fitting a Mini 30. Not even close. I can't understand how it would be difficult to make a pad that fit. Absolutely silly nonsense.

Old-school Solution, Rather 50% Of One (29/07/2018)

let down (13/08/2009)

stock screws pull through the pad ,too bad as is a good alt. for ar15 build project ,hope they can remedy problem

Worst product ever bought (28/08/2009)

Masen recoil pad (13/07/2010)

Same as everyone else top screw pulls through pad and it doesn't secure the A2 stock to the rifle. absolute junk, I wouldn't put it on an airsoft rifle.

Do not buy (06/12/2010)