Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

SINCLAIR INTERNATIONAL
SINCLAIR RIMFIRE GUIDES FOR 22 LONG RIFLE

749002590

We have a large assortment of rod guides that we make for popular target/varmint rimfire rifles and are constantly adding more models to our selection. Rimfire guides can’t have an O-ring due to the dimensions we are working with. Making rod guides to allow you to clean from the breech on rimfires is a little more complex due to the ejectors and trigger parts that are in the way. All of our rimfire rod guides will accept our Sinclair Solvent Ports, except for the Anschutz Model 54 guide. Does not include integral solvent port.

Más...

Contamos con una amplia variedad de guías para varillas que fabricamos para los rifles de fuego anular de tiro al blanco/varmint más populares y estamos agregando constantemente más modelos a nuestra selección. Las guías para fuego anular no pueden tener un anillo O debido a las dimensiones con las que estamos trabajando. Fabricar guías para varillas que te permitan limpiar desde la recámara en los rifles de fuego anular es un poco más complejo debido a los eyectores y partes del gatillo que están en el camino. Todas nuestras guías para varillas de fuego anular aceptarán nuestros Puertos de Solvente Sinclair, excepto la guía para el modelo Anschutz 54. No incluye puerto de solvente integrado.

Más...

Evaluaciones de clientes para SINCLAIR INTERNATIONAL REMINGTON MODEL 37 RIMFIRE ROD GUIDE

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,5

Nice guide (21/04/2011)

Fits nicely in my savage mark II

Savage Mark 1 (27/02/2012)

Works also well for the single shot Savage Mark 1

Savage Mark II TR (03/07/2014)

I bought this thinking it would fit my Savage Mark II TR, it did not. It is possible I can modify/file it to work at some point, but that is not the point. It is too tight to go all the way in. I did not think there was any differences between the the different mark II receivers... figured they were all the same. There may or may not be. But I know this does not fit in a Savage Mark II TR. Booo

It works on Savage Mark I FVT (09/06/2016)

I have a new Savage FVT for teaching the Boy Scout Merit Badge Program. I needed a bore guide and ordered this one. It fits great, you just need to pull the trigger to get it all the way in.

Doesn't fit the Savage Mark II (11/05/2017)

I should have read the reviews first. I bought this for my Savage Mark II BTV and it doesn't fit as another reviewer has said.

I plan on keeping it to see if it can be modified but it doesn't work as is. The diameter is correct but it gets hung up on something, I believe the ejector but haven't had time to look as yet.

Not sure what savage rifles this thing is supposed to fit but certainly not the Mark II

REALLY DISSAPONTED!!!!!!!!!!!!!!!!!! (16/10/2010)

The rod guide is so tight in the action that I cannot get it seated against the breech. The bottom is completely open, so that it can clear the fixed portion of the feed ramp. This would allow solvent to run into the magazine well and stock.
The "protection" provided for the chamber against "cleaning rod damage" is completely offset by the fact I HAD TO BEAT IT OUT OF THE ACTION WITH A BRASS DRIFT.

Great Product (24/03/2012)

Makes Cleaning a Pleasure, as ALL SINCLAIR Product. work Great

Works fine with CZ455 (08/08/2011)

I wasn't sure if this product will be useful on a CZ455 due to the protruding ejector that can scratch your stainless steel rod. Given several forums discussion, I went anyway purchasing it. On my CZ455 .22lr, I use this bore guide along with a .17mm rod. It works perfectly.

Works, but could be better (05/02/2012)

Works fine on my CZ452 varmint using a .17 cal. Dewie coated rod & using a thread adapter & a .22 cal. jag or brush. But, I have to hold the guide from comming out when I pull the rod out, but, I can live with that.

Works like a charm (05/12/2013)

I bought this to see if it would fit my Remington model 510 Targetmaster after talking to a representative from Brownell's. It fits perfectly, slips right into the space available, and works great. And as usual, customer service at Brownell's was awesome. The rep looked up both the model 504 and 510 to compare their designs, and was very honest and helpful. Another great buy from Brownell's/Sinclair.

Leer 10 mas calificaciones en brownells.com

19.9 26.9 14 EUR

N.º de producto: 749002590
SINCLAIR INTERNATIONAL REMINGTON MODEL 37 RIMFIRE ROD GUIDE Contamos con una amplia variedad de guías para varillas que fabricamos para los rifles de fuego anular de tiro al blanco/varmint más populares y estamos agregando constantemente más modelos a nuestra selección. Las guías para fuego anular no pueden tener un anillo O debido a las dimensiones con las que estamos trabajando. Fabricar guías para varillas que te permitan limpiar desde la recámara en los rifles de fuego anular es un poco más complejo debido a los eyectores y partes del gatillo que están en el camino. Todas nuestras guías para varillas de fuego anular aceptarán nuestros Puertos de Solvente Sinclair, excepto la guía para el modelo Anschutz 54. No incluye puerto de solvente integrado.

19.9 EUR 0 19,90 € *

Notificar sobre disponibilidad

No disponible.

Caracteristicas: Valido para: Remington Model 37

SINCLAIR INTERNATIONAL SINCLAIR RIMFIRE GUIDES FOR 22 LONG RIFLE

Evaluaciones de clientes para SINCLAIR INTERNATIONAL REMINGTON MODEL 37 RIMFIRE ROD GUIDE

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para SINCLAIR INTERNATIONAL REMINGTON MODEL 37 RIMFIRE ROD GUIDE

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

SINCLAIR INTERNATIONAL
SINCLAIR RIMFIRE GUIDES FOR 22 LONG RIFLE