The RCBS 3-Way Cutter is designed for use on Trim Pro Case Trimmers and reduces the trimming /deburring chore. The 3-Way Cutter not only trims cases to lengths but an inside blade chamfers the case while an outside blade deburrs it. Install on all Trim Pro Case Trimmers. Order one 3-Way Cutter by caliber and then simply order additional chamfer/pilots for other calibers.
Más...
El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
Más...
Evaluaciones de clientes para RCBS 338 CALIBER 3-WAY CUTTER
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4,4
Excellent Product(28/02/2017)
This product produces excellent trimming. Very easily installed and easy to clean.
Outstanding Idea!(25/03/2012)
I use this on the motorized Trim Pro and it significantly reduces the prep time spent on each case. This is a great idea and works great even if you only neck-size your cases.
Great time saver(26/03/2013)
This tool makes a tedious job almost enjoyable. It took about 5 minutes to set up using the supplied instructions, and does a great job of trimming, chamfering and deburring case necks all in one step. As an added bonus, because there is no "flash" around the necks after the cut, the cases just pop right off. I wish I had found this 35 years ago when I started reloading.
On top of that, RCBS service is awesome. I had an older model cutter that does not allow the cutting head to be removed. After over 30 years, it was so dull it just wouldn't cut. I e-mailed RCBS asking if I could purchase a replacement cutter. They sent me a new shaft and removable cutter - FREE! That kind of service keeps me coming back.
Not meant for electric Trim Pro(14/05/2018)
I have a Trim Pro 2 (powered version.) When contacted, RCBS says it is not meant for their power version. I find that with care and extra attention, it will work (cases tend to fly across the room when withdrawing the cutting head and the torque can spin the case even when "securely" locked in position.) They advise the head may wear out more quickly. As stated, with care, it seems to do a good job. I use for .223 and .30 cal. RCBS support is great, a real positive!
Excellent(06/02/2012)
This Could be one of the best time saving tools I have in brass prep. Works precisely as advertised and very easy to replace the standard cutting head and set up. Trim length is adjusted as normal. Inside deburring is accomplished by loosening the pilot and moving in and out to desired cut - then lock in place. Outside chamfer is done by loosening set screw and turning the knob to lower the blade onto the outside rim of the case. Took less than 4-5 minutes to figure out and set up for the first time and every case comes out perfect. Used with my drill on the trim pro shaft, I can easily complete about 8- 10 rounds per minute
Magic(09/02/2011)
Now if you ever want to save yourself many hours at the reloading bench then this is the most magnificant tool one could ever buy. Just screw it onto your existing RCBS Trimmer and adjust to suit your brass and just like magic...Its job done. No more pain involved in deburing by hand... The only downside I can think of is that I didnt get one earlier than I did...
3 way cutter(10/04/2016)
Bought this thinking I would save time on my brand new brass for 6mm br and it scratched the hell out of the inside of the neck on my dollar a piece Lapua brass. Also leaves too much chamfer for my liking, I'll stick with my torpedo chamfer/debur tool.
Would be fine for hunting ammo but not for Benchrest use.
N.º de producto: 749005903 RCBS 338 CALIBER 3-WAY CUTTER Ref Fabricante: 90287076683902870 El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar.
Recorta los casquillos a la longitud deseada mientras que una cuchilla interna escariada y otra cuchilla externa desbarban el casquillo.
Se puede instalar en todas las Recortadoras de Casquillos Trim Pro y se requiere un Cortador 3-Way por calibre.
Atributos
Calibre:
338 Caliber (.338)
Peso de entrega: 0,091kgAltura de envío: 51mmAncho de envío: 57mmLongitud de envío: 89mm
UPC
: 076683902870
Detalles del artículo
Hecho en USA
N.º de producto: 749006053 RCBS 22 CALIBER 3-WAY CUTTER Ref Fabricante: 90278076683902788 El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
N.º de producto: 749006054 RCBS 30 CALIBER 3-WAY CUTTER Ref Fabricante: 90284076683902849 El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
N.º de producto: 749006061 RCBS 6MM TRIM PRO 3-WAY CUTTER Ref Fabricante: 90279076683902795 El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
N.º de producto: 749006007 RCBS 6.5MM 3-WAY CUTTER Ref Fabricante: 90281076683902818 El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
N.º de producto: 749006008 RCBS 7MM 3-WAY CUTTER Ref Fabricante: 90283076683902832 El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
The RCBS 3-Way Cutter is designed for use on Trim Pro Case Trimmers and reduces the trimming /deburring chore. The 3-Way Cutter not only trims cases to lengths but an inside blade chamfers the case while an outside blade deburrs it. Install on all Trim Pro Case Trimmers. Order one 3-Way Cutter by caliber and then simply order additional chamfer/pilots for other calibers.
Más...
El Cortador 3-Way de RCBS está diseñado para usarse en las Recortadoras de Casquillos Trim Pro y reduce la tarea de recortar/desbarbar. El Cortador 3-Way no solo recorta los casquillos a la longitud deseada, sino que una cuchilla interna escariada el casquillo mientras que otra cuchilla externa lo desbarba. Instálalo en todas las Recortadoras de Casquillos Trim Pro. Pide un Cortador 3-Way por calibre y luego simplemente solicita chamfer/pilots adicionales para otros calibres.
Más...
Evaluaciones de clientes para RCBS 338 CALIBER 3-WAY CUTTER
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4,4
Excellent Product(28/02/2017)
This product produces excellent trimming. Very easily installed and easy to clean.
Outstanding Idea!(25/03/2012)
I use this on the motorized Trim Pro and it significantly reduces the prep time spent on each case. This is a great idea and works great even if you only neck-size your cases.
Great time saver(26/03/2013)
This tool makes a tedious job almost enjoyable. It took about 5 minutes to set up using the supplied instructions, and does a great job of trimming, chamfering and deburring case necks all in one step. As an added bonus, because there is no "flash" around the necks after the cut, the cases just pop right off. I wish I had found this 35 years ago when I started reloading.
On top of that, RCBS service is awesome. I had an older model cutter that does not allow the cutting head to be removed. After over 30 years, it was so dull it just wouldn't cut. I e-mailed RCBS asking if I could purchase a replacement cutter. They sent me a new shaft and removable cutter - FREE! That kind of service keeps me coming back.
Not meant for electric Trim Pro(14/05/2018)
I have a Trim Pro 2 (powered version.) When contacted, RCBS says it is not meant for their power version. I find that with care and extra attention, it will work (cases tend to fly across the room when withdrawing the cutting head and the torque can spin the case even when "securely" locked in position.) They advise the head may wear out more quickly. As stated, with care, it seems to do a good job. I use for .223 and .30 cal. RCBS support is great, a real positive!
Excellent(06/02/2012)
This Could be one of the best time saving tools I have in brass prep. Works precisely as advertised and very easy to replace the standard cutting head and set up. Trim length is adjusted as normal. Inside deburring is accomplished by loosening the pilot and moving in and out to desired cut - then lock in place. Outside chamfer is done by loosening set screw and turning the knob to lower the blade onto the outside rim of the case. Took less than 4-5 minutes to figure out and set up for the first time and every case comes out perfect. Used with my drill on the trim pro shaft, I can easily complete about 8- 10 rounds per minute
Magic(09/02/2011)
Now if you ever want to save yourself many hours at the reloading bench then this is the most magnificant tool one could ever buy. Just screw it onto your existing RCBS Trimmer and adjust to suit your brass and just like magic...Its job done. No more pain involved in deburing by hand... The only downside I can think of is that I didnt get one earlier than I did...
3 way cutter(10/04/2016)
Bought this thinking I would save time on my brand new brass for 6mm br and it scratched the hell out of the inside of the neck on my dollar a piece Lapua brass. Also leaves too much chamfer for my liking, I'll stick with my torpedo chamfer/debur tool.
Would be fine for hunting ammo but not for Benchrest use.