Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

BROWNELLS
1911 AUTO MAINSPRING HOUSING REBUILD KIT

050806006362 080000549

Helps Keep Your Pistol Running Reliably

Handy kit contains all the parts you need to mount a new mainspring housing on your 1911, or reburish the internal components to factory-new condition. Includes standard, factory weight (23 lb.) hammer spring to help ensure positive ignition and restore your pistol s reliability by replacing an old, weak spring. Also includes mainspring cap, cap pin, and retaining pin, so you don t ruin a good-looking new housing s appearance with old, dinged hardware. Kit available with blued or stainless external components to match your pistol s finish. Installation instructions included.

SPECS: Kit contains factory weight hammer spring, mainspring cap, cap pin, mainspring housing retainer pin, and instructions. Fits full-size 1911 Government Model, Commander, and clones.

Más...

Ayuda a Mantener Tu Pistola Funcionando de Manera Fiable

Este práctico kit contiene todas las piezas que necesitas para montar una nueva carcasa del resorte principal en tu 1911, o para renovar los componentes internos a condiciones como nuevas de fábrica. Incluye un resorte de martillo estándar de peso de fábrica (23 lb.) para ayudar a asegurar una ignición positiva y restaurar la fiabilidad de tu pistola reemplazando un resorte viejo y débil. También incluye la tapa del resorte principal, el pasador de la tapa y el pasador de retención, para que no arruines la apariencia de una nueva carcasa con hardware viejo y abollado. Kit disponible con componentes externos azulados o de acero inoxidable para que coincida con el acabado de tu pistola. Instrucciones de instalación incluidas.

ESPECIFICACIONES: El kit contiene un resorte de martillo de peso estándar de fábrica, tapa del resorte principal, pasador de la tapa, pasador de retención de la carcasa del resorte principal e instrucciones. Compatible con modelos 1911 Government de tamaño completo, Commander y clones.

Más...

Evaluaciones de clientes para BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT BLUED

Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 5

SA mil spec and ed brown flat ms housing (15/04/2012)

Bought this and the ed brown flat mainspring housing to replace the ILS housing on the back of my SA mil spec. the parts are perfect, no flaws. FYI this kit is not needed if wanting to change out the ILS housing with something else, you can use the stock parts provided in the SA ILS housing with another housing... but these parts are nice and are a welcome upgrade. Make sure you wear safety glasses while messing with your MS housing, especially if you're not using a bench vise!!

1911 Mainspring Housing rebuild kit (23/06/2018)

I recently purchased three of the SS spring sets for my SA 1911-A1 in 9mm and 45 ACP plus my older Ruger 1911 45 ACP. I installed the spring kits in new Ed Brown arched mainspring housings. The ones with the vertical grooves. What a difference. The arched grip feels so much more comfortable over a flat housing design. Plus the bottom of the frame / grip no longer digs into the palm of my hand. I was contemplating doing a "Bobtail" on each of my pistols but this was a much easier and cheaper solution with great results. The spring kit is everything you need to rebuild a mainspring housing. As a kit the overall price is cheaper than purchasing each component on their own. Good product and a great price. Thanks Brownells.

It's perfect (24/08/2010)

Drops right in to your mainspring housing if you need to replace the spring, pins, all the internals. Handy if you want to delete any safety lock mechanisms that are associated with the MSH like the Springfield Armory ILS.

The spring is a 23# (the spec rating) Wolff Spring

Very helpful, complete kit. (25/03/2011)

Used in conjunction with a new Springfield Armory 20 LPI Flat Mainspring Housing without ILS. Replaced the Arched ILS Mainspring Housing/ Mainspring hardware that came with my SA 1911-A1 GI Model.

Kit allowed me to rid the gun of this silly "safety" feature, and get that classic slim look and feel that 1911's were meant to have. Parts were well-packaged, well-labeled, and the mainspring is a Wolff 23 lb'er. Easy 4 minute install with common hand tools and a little patience. Hammer fall and trigger pull are slightly more crisp, and I now have full confidence in the parts in the Mainspring housing area.

Very good kit (09/04/2011)

I like it, comes with every thing you need to replace your factory set up. This is a good replacement for pistols equipped with the ISL in the mainspring housing. This kit gets the job done.

Great. (10/04/2011)

Got this with my new mainspring housing/magwell. Works and fits great.

Perfect (07/03/2013)

Great little kit. Just drop it in and go. Perfect.

Springfield Owners:
This will work with the Springfield ILS,and includes a mainspring cap, which Springfield's don't have, so if you change out to an Ed Brown or S&A magwell, this makes it super easy.

Easy ILS replacement (24/02/2014)

Bought this to replace ILS internals when replacing MSH for a magwell setup on a Springer Loaded. Easy to install with a little patience in installing housing pin. Used 18 lb hammer spring instead of the factory 23 lb spring which was included. Nice kit and handy to have on handif you own several 1911s.

Great all-around kit! (17/06/2014)

These parts fit wonderfully in my newly purchased Ed Brown Blank MSH! What is great about this kit is that they didn't just take parts from "no name" manufacturers; they took some of the best parts they could find and combined them into one package! The mainspring was a little stiff at first but, after cocking the hammer about 50 times, it loosened up. The only real con I can give about this kit is that it is a little tricky to install without a vice (Had to have another person hold the mainspring down while I installed the pin). But, I'm not going to deduct a star because of that. Overall, this is a great kit for those who are either buying a new MSH or just want to replace worn parts.

SUPERB Quality (01/08/2017)

I used this mainspring build kit to build up a Ruger flat mainspring housing. I have to say I was much more than just pleased by the parts that were included. Everything fit perfectly and effortlessly into the MS housing and works great. While the pins are all high quality and came in Brownells labeled bags, the mainspring itself is (at least in my kit and another reviewerâs) a Wolf spring.

All the parts you may lose (04/09/2018)

A nice kit to rebuild or replace lost parts of the 1911 Main Spring Housing. I had to build a lanyard loop housing for my Walther Colt 22LR 1911. Rail Gun and this kit has all the parts

Leer 11 mas calificaciones en brownells.com

19.9 29.9 2 EUR

N.º de producto: 080000549
BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT BLUED 050806006362 Este práctico kit contiene todas las piezas que necesitas para montar una nueva carcasa del resorte principal en tu 1911, o para renovar los componentes internos a condiciones como nuevas de fábrica. Incluye un resorte de martillo estándar de peso de fábrica (23 lb.) para ayudar a asegurar una ignición positiva y restaurar la fiabilidad de tu pistola reemplazando un resorte viejo y débil. También incluye la tapa del resorte principal, el pasador de la tapa y el pasador de retención, para que no arruines la apariencia de una nueva carcasa con hardware viejo y abollado. Kit disponible con componentes externos azulados o de acero inoxidable para que coincida con el acabado de tu pistola. Instrucciones de instalación incluidas.

19.9 EUR 1 19,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: 1911

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El kit incluye todas las piezas necesarias para montar o renovar la carcasa del resorte principal de una pistola 1911.
Contiene un resorte de martillo estándar de 23 lb., tapa del resorte principal, pasador de la tapa y pasador de retención, con opciones de acabado azulados o de acero inoxidable.
Compatible con modelos 1911 Government de tamaño completo, Commander y clones, e incluye instrucciones de instalación.

Atributos

Hacer: 1911 Peso de entrega: 0,023kg Altura de envío: 8mm Ancho de envío: 109mm Longitud de envío: 198mm UPC : 050806006362

Detalles del artículo

Hecho en USA

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

N.º de producto: 080000550
BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT STAINLESS 050806006379 Este práctico kit contiene todas las piezas que necesitas para montar una nueva carcasa del resorte principal en tu 1911, o para renovar los componentes internos a condiciones como nuevas de fábrica. Incluye un resorte de martillo estándar de peso de fábrica (23 lb.) para ayudar a asegurar una ignición positiva y restaurar la fiabilidad de tu pistola reemplazando un resorte viejo y débil. También incluye la tapa del resorte principal, el pasador de la tapa y el pasador de retención, para que no arruines la apariencia de una nueva carcasa con hardware viejo y abollado. Kit disponible con componentes externos azulados o de acero inoxidable para que coincida con el acabado de tu pistola. Instrucciones de instalación incluidas.

29.9 EUR 2 29,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: 1911

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El kit incluye todas las piezas necesarias para montar o renovar la carcasa del resorte principal de una pistola 1911, incluyendo un resorte de martillo de 23 lb.
Viene con componentes externos en acabado azul o acero inoxidable y contiene instrucciones de instalación.
Compatible con modelos 1911 Government de tamaño completo, Commander y clones.

Atributos

Hacer: 1911 Peso de entrega: 0,023kg Altura de envío: 15mm Ancho de envío: 64mm Longitud de envío: 130mm UPC : 050806006379

Detalles del artículo

Hecho en USA

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Renueva tu 1911 con el kit de reconstrucción de carcasa de resorte principal de Brownells. Incluye todo lo necesario para restaurar su fiabilidad. 🔧

Helps Keep Your Pistol Running Reliably

SPECS: Kit contains factory weight hammer spring, mainspring cap, cap pin, mainspring housing retainer pin, and instructions. Fits full-size 1911 Government Model, Commander, and clones.

Más...

Ayuda a Mantener Tu Pistola Funcionando de Manera Fiable

Más...

Evaluaciones de clientes para BROWNELLS 1911 MAINSPRING HOUSING REBUILD KIT BLUED

Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 5

SA mil spec and ed brown flat ms housing (15/04/2012)

1911 Mainspring Housing rebuild kit (23/06/2018)

It's perfect (24/08/2010)

Very helpful, complete kit. (25/03/2011)

Very good kit (09/04/2011)

I like it, comes with every thing you need to replace your factory set up. This is a good replacement for pistols equipped with the ISL in the mainspring housing. This kit gets the job done.

Great. (10/04/2011)

Got this with my new mainspring housing/magwell. Works and fits great.

Perfect (07/03/2013)

Easy ILS replacement (24/02/2014)

Great all-around kit! (17/06/2014)

SUPERB Quality (01/08/2017)

All the parts you may lose (04/09/2018)

A nice kit to rebuild or replace lost parts of the 1911 Main Spring Housing. I had to build a lanyard loop housing for my Walther Colt 22LR 1911. Rail Gun and this kit has all the parts

Leer 11 mas calificaciones en brownells.com