Lighter & Heavier Springs To Tailor Precise Trigger Pull
Lighter hammer springs are required to gain those ultralight trigger pulls demanded by competitive shooters. Heavy springs adjust trigger let-off to individual requirements.
Más...
Resortes Más Ligeros y Más Pesados para Ajustar el Peso del Disparador a la Medida
Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
Más...
Evaluaciones de clientes para WOLFF 17 LB., LIGHT, 1911 AUTO, 3-PAK
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4,4
Nice!(12/07/2016)
Completed my trigger job for a nice clean smooth crisp pull.
Wolff springs rock(29/08/2010)
The quality of Wolff springs is top notch. I have changed all of my factory springs in my 1911 to the Wollf brand. I have been using them for many years and they have never failed me. They work so good that's all I use now.
Think before you leap(10/02/2012)
First, there's nothing wrong with the product; it is as advertised. I would reccommend this to others...as long as they needed a 23lb spring. It is of excellent quality. That's why it got 5 stars. What wasn't of excellent quality was my thought process in purchasing. I had purchased a C&S sear, a Clark sear spring and a Greider trigger earlier so I thought I would purchase a hammer spring without knowing exactly what the weight of the current spring was. Let's just say that 23lbs is way too much for my comfort. It was a stock Springfield 1911A1 spring and I'm guessing (again) that it was about 18lbs or so. I have since swapped the spring back out. Nothing wrong with the new; just my mistake. Installed as advertised, no problems.
Great Product!(14/03/2011)
I replaced my standard (supposedly 23 lbs.) hammer spring with this Wolff spring rated at 20 lbs. The Wolff spring is actually longer than the factory spring, but the feel is so much smoother! From what I can tell, the hammer strike is just as strong, and the primer dents look identical to those of the factory spring. The trigger pull is a perfect 4 lbs. now, and the function (most important) is consistent, positive and flawless. This inexpensive spring makes it feel like an expensive trigger job, without any filing, fitting, or compromise in safety or reliability. And I can always trust the quality of Wolff springs!
Great for light trigger pull(18/06/2015)
Thiis 20lb hammer spring is great for lighter trigger pulls, perfect for competitive shooting or target practice.
If you go to a pistol competition your trigger pull will be tested & must be 5lbs so this will put your trigger pull lighter so great for those looking to lower trigger pull.
This spring is too long and does not work. The spring housing can be slid up the back of the frame almost into position and the hammer can be cocked and release, but when it is moved up just enough to put the housing pin in place the spring is stacked and will not allow the hammer to be cocked. Gun is a Springfield Armory TPR.
Excellent hammer spring!(20/07/2016)
I use this spring in my Kimber TLE II 9mm and Springfield Operator .45. Makes for a much lighter trigger pull, zero problems with light primer strikes to include any factory ammo (CCI, Winchester, Federal). Wish I would've went lighter sooner.
(I use this spring with an aftermarket mainspring housing in my Springfield. I believe the Springfield's ILS system mainspring housing requires a proprietory spring) This is what likely caused a problem for another reviewer.
N.º de producto: 969263170 WOLFF 17 LB., LIGHT, 1911 AUTO, 3-PAK Ref Fabricante: 26317 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
Hacer:
1911
Modelo:
Commander,Government
Peso de entrega: 0,023kgAltura de envío: 13mmAncho de envío: 64mmLongitud de envío: 130mm
Detalles del artículo
Hecho en USA
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
N.º de producto: 969262170 WOLFF 17 LB., LIGHT, 1911 AUTO, 1 EACH Ref Fabricante: 26217 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
N.º de producto: 969262200 WOLFF 20 LB., LIGHT, 1911 AUTO, 1 EACH Ref Fabricante: 26220 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
N.º de producto: 969262230 WOLFF 23 LB., FACTORY, 1911 AUTO, 1 EACH Ref Fabricante: 26223 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
N.º de producto: 969263180 WOLFF 18 LB., LIGHT, 1911 AUTO, 3-PAK Ref Fabricante: 26318 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
N.º de producto: 969263200 WOLFF 20 LB., LIGHT, 1911 AUTO, 3-PAK Ref Fabricante: 26320 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
N.º de producto: 969263230 WOLFF 23 LB., FACTORY, 1911 AUTO, 3-PAK Ref Fabricante: 26323 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
N.º de producto: 969263250 WOLFF 25 LB., HEAVY, 1911 AUTO, 3-PAK Ref Fabricante: 26325 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
N.º de producto: 969262180 WOLFF 18 LB., LIGHT, 1911 AUTO, 1 EACH Ref Fabricante: 26218 Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
18.9EUR018,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Lighter & Heavier Springs To Tailor Precise Trigger Pull
Lighter hammer springs are required to gain those ultralight trigger pulls demanded by competitive shooters. Heavy springs adjust trigger let-off to individual requirements.
Más...
Resortes Más Ligeros y Más Pesados para Ajustar el Peso del Disparador a la Medida
Se requieren resortes de martillo más ligeros para obtener esos disparadores ultraligeros que demandan los tiradores competitivos. Los resortes más pesados ajustan el punto de liberación del disparador a los requisitos individuales.
Más...
Evaluaciones de clientes para WOLFF 17 LB., LIGHT, 1911 AUTO, 3-PAK
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4,4
Nice!(12/07/2016)
Completed my trigger job for a nice clean smooth crisp pull.
Wolff springs rock(29/08/2010)
The quality of Wolff springs is top notch. I have changed all of my factory springs in my 1911 to the Wollf brand. I have been using them for many years and they have never failed me. They work so good that's all I use now.
Think before you leap(10/02/2012)
First, there's nothing wrong with the product; it is as advertised. I would reccommend this to others...as long as they needed a 23lb spring. It is of excellent quality. That's why it got 5 stars. What wasn't of excellent quality was my thought process in purchasing. I had purchased a C&S sear, a Clark sear spring and a Greider trigger earlier so I thought I would purchase a hammer spring without knowing exactly what the weight of the current spring was. Let's just say that 23lbs is way too much for my comfort. It was a stock Springfield 1911A1 spring and I'm guessing (again) that it was about 18lbs or so. I have since swapped the spring back out. Nothing wrong with the new; just my mistake. Installed as advertised, no problems.
Great Product!(14/03/2011)
I replaced my standard (supposedly 23 lbs.) hammer spring with this Wolff spring rated at 20 lbs. The Wolff spring is actually longer than the factory spring, but the feel is so much smoother! From what I can tell, the hammer strike is just as strong, and the primer dents look identical to those of the factory spring. The trigger pull is a perfect 4 lbs. now, and the function (most important) is consistent, positive and flawless. This inexpensive spring makes it feel like an expensive trigger job, without any filing, fitting, or compromise in safety or reliability. And I can always trust the quality of Wolff springs!
Great for light trigger pull(18/06/2015)
Thiis 20lb hammer spring is great for lighter trigger pulls, perfect for competitive shooting or target practice.
If you go to a pistol competition your trigger pull will be tested & must be 5lbs so this will put your trigger pull lighter so great for those looking to lower trigger pull.
This spring is too long and does not work. The spring housing can be slid up the back of the frame almost into position and the hammer can be cocked and release, but when it is moved up just enough to put the housing pin in place the spring is stacked and will not allow the hammer to be cocked. Gun is a Springfield Armory TPR.
Excellent hammer spring!(20/07/2016)
I use this spring in my Kimber TLE II 9mm and Springfield Operator .45. Makes for a much lighter trigger pull, zero problems with light primer strikes to include any factory ammo (CCI, Winchester, Federal). Wish I would've went lighter sooner.
(I use this spring with an aftermarket mainspring housing in my Springfield. I believe the Springfield's ILS system mainspring housing requires a proprietory spring) This is what likely caused a problem for another reviewer.