Gives Your AK The Adjustability & Convenience Of An M4 Stock
Aluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware.
SPECS: Aluminum, hardcoat anodized, matte black finish. 8 (cm) overall length. Fits most AK-47/AKM/AKS rifles with stamped receivers, except the Yugo RPK and Iraqi Tabuk. Accepts Colt and other mil-spec collapsible buttstocks that fit a 1.14 dia. buffer tube. Kit includes stock extension, end cap, mounting bolts, nut, (3) dust plates, and installation instructions.
Más...
Dale a tu AK la Ajustabilidad y Comodidad de una Culata M4
La extensión del receptor de aluminio reemplaza la culata fija estándar de tu AK-47 para que puedas instalar una culata plegable M4 en tu rifle. Ofrece cinco posiciones de bloqueo; los números de índice blancos correspondientes son visibles a través del orificio de acceso del pasador de liberación que se encuentra en muchas culatas. Las tomas cercanas al receptor en cada lado de la extensión aceptan eslingas de punto único con enganches rápidos de botón para sujeción. Un compartimento interno de almacenamiento es accesible al retirar la tapa con tornillo de la parte trasera de la extensión. Incluye herrajes de montaje.
ESPECIFICACIONES: Aluminio, anodizado duro, acabado mate negro. 8 (cm) de longitud total. Apto para la mayoría de los rifles AK-47/AKM/AKS con receptores estampados, excepto el Yugo RPK y el Tabuk iraquí. Acepta culatas plegables Colt y otras de especificaciones militares que se ajustan a un tubo amortiguador con diámetro de 1.14. El kit incluye extensión de la culata, tapa final, tornillos de montaje, tuerca, (3) placas antipolvo e instrucciones de instalación.
Más...
Evaluaciones de clientes para VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 5
VLTOR simply makes great products(22/02/2010)
Extremely well made, solid, and super easy to install. One of the best upgrades I have ever been able to simply bolt onto a gun. With the newly adjusted LOP on an AK platform, coupled with the Ultimak rail system, I am able to fully utilize a stubby vertical foregrip without any compromise to easy mag changes or a good solid shooting stance.
AWESOME!(08/03/2010)
Quick, easy and SOLID install! Best part about it...IT'S METAL! None of this polymer junk that will break if you ever have to use the butt of your weapon instead.
AWESOME!(08/03/2010)
Quick, easy and SOLID installation and the best part about it... IT'S METAL! None of this polymer junk that will break if you need to use the butt of your weapon instead.
Drop in on Saiga 12(18/09/2010)
Excellent quality, perfect fit on my Saiga 12 shotgun. O-ring on rear cap seals storage area. Magpul MOE fits very well.
WASR 10/63(07/03/2011)
The most sturdy stock system available for an ak47 platform. Really improves feel of the rifle! Would recommend to anyone looking to get an ak to compete with the functionality of the ar15.
Absolutely Outstanding(24/06/2011)
Pleased with this product is an understatement! The hardest part of the install was getting the old stock off! Seriously well made, looks good, and looks like it will last a very long time. I used a Mag pul MOE stock. The rifle looks great. At first I thought I was spending too much money but not anymore. It's well worth the price.
Great Product(25/03/2012)
Just arrived and it took me about 5 minutes to put this on my Mac 90, perfect fit, it took me longer to take off the original stock, strong and looks great, beats a plastic one any day, I will buy more.
Excellent accessory addition to AK(31/08/2013)
Installed easily. Fit perfect, no play like that of a folding stock. Adjustable for pull length. When combined with a Magpul Butt Stock (MIL-SPEC) you made a new AMERICAN FURNITURE version of the AK.
Mak90(15/09/2013)
I put this on a Mak90 (stamped) it fit great easy install . I shoot allot have many AK's Norinco is a bit hard to find parts that work well do to the heavy receiver and berral but this product works well . I like how stought the butt stock is and allows for AR type stock which most of us are use to allows for close combat or distance unlike what was on their.
A must for every tactical rigged AK.(06/06/2015)
Already have one on my WASR-10(also has an eotech exps 3-4). Transition from clearing rooms to engaging longer range targets in seconds. This will be my second VLTOR AK buffer tube. This one is going on my Saiga 12.
N.º de producto: 100003177 VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER Ref Fabricante: RE-47 La extensión del receptor de aluminio reemplaza la culata fija estándar de tu AK-47 para que puedas instalar una culata plegable M4 en tu rifle. Ofrece cinco posiciones de bloqueo; los números de índice blancos correspondientes son visibles a través del orificio de acceso del pasador de liberación que se encuentra en muchas culatas. Las tomas cercanas al receptor en cada lado de la extensión aceptan eslingas de punto único con enganches rápidos de botón para sujeción. Un compartimento interno de almacenamiento es accesible al retirar la tapa con tornillo de la parte trasera de la extensión. Incluye herrajes de montaje.
La extensión del receptor de aluminio permite instalar una culata plegable M4 en tu AK-47, con cinco posiciones de bloqueo y números de índice visibles.
Acepta eslingas de punto único con enganches rápidos de botón y tiene un compartimento interno de almacenamiento accesible.
Incluye herrajes de montaje y es compatible con la mayoría de los rifles AK-47/AKM/AKS con receptores estampados, exceptuando el Yugo RPK y el Tabuk iraquí.
Atributos
Acabado:
Matte
Color:
Black
Estilo:
Collapsible
Hacer:
AK-47
Material:
Aluminio
Modelo:
AK-47
Peso de entrega: 0,249kgAltura de envío: 33mmAncho de envío: 58mmLongitud de envío: 251mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Transforma tu AK-47 con el adaptador de culata plegable VLTOR. ✨ Fácil instalación, cinco posiciones y almacenamiento interno. ¡Mejora tu rifle hoy!
Gives Your AK The Adjustability & Convenience Of An M4 Stock
Aluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware.
SPECS: Aluminum, hardcoat anodized, matte black finish. 8 (cm) overall length. Fits most AK-47/AKM/AKS rifles with stamped receivers, except the Yugo RPK and Iraqi Tabuk. Accepts Colt and other mil-spec collapsible buttstocks that fit a 1.14 dia. buffer tube. Kit includes stock extension, end cap, mounting bolts, nut, (3) dust plates, and installation instructions.
Más...
Dale a tu AK la Ajustabilidad y Comodidad de una Culata M4
La extensión del receptor de aluminio reemplaza la culata fija estándar de tu AK-47 para que puedas instalar una culata plegable M4 en tu rifle. Ofrece cinco posiciones de bloqueo; los números de índice blancos correspondientes son visibles a través del orificio de acceso del pasador de liberación que se encuentra en muchas culatas. Las tomas cercanas al receptor en cada lado de la extensión aceptan eslingas de punto único con enganches rápidos de botón para sujeción. Un compartimento interno de almacenamiento es accesible al retirar la tapa con tornillo de la parte trasera de la extensión. Incluye herrajes de montaje.
ESPECIFICACIONES: Aluminio, anodizado duro, acabado mate negro. 8 (cm) de longitud total. Apto para la mayoría de los rifles AK-47/AKM/AKS con receptores estampados, excepto el Yugo RPK y el Tabuk iraquí. Acepta culatas plegables Colt y otras de especificaciones militares que se ajustan a un tubo amortiguador con diámetro de 1.14. El kit incluye extensión de la culata, tapa final, tornillos de montaje, tuerca, (3) placas antipolvo e instrucciones de instalación.
Más...
Evaluaciones de clientes para VLTOR WEAPON SYSTEMS AK-47 STOCK ADAPTER
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 5
VLTOR simply makes great products(22/02/2010)
Extremely well made, solid, and super easy to install. One of the best upgrades I have ever been able to simply bolt onto a gun. With the newly adjusted LOP on an AK platform, coupled with the Ultimak rail system, I am able to fully utilize a stubby vertical foregrip without any compromise to easy mag changes or a good solid shooting stance.
AWESOME!(08/03/2010)
Quick, easy and SOLID install! Best part about it...IT'S METAL! None of this polymer junk that will break if you ever have to use the butt of your weapon instead.
AWESOME!(08/03/2010)
Quick, easy and SOLID installation and the best part about it... IT'S METAL! None of this polymer junk that will break if you need to use the butt of your weapon instead.
Drop in on Saiga 12(18/09/2010)
Excellent quality, perfect fit on my Saiga 12 shotgun. O-ring on rear cap seals storage area. Magpul MOE fits very well.
WASR 10/63(07/03/2011)
The most sturdy stock system available for an ak47 platform. Really improves feel of the rifle! Would recommend to anyone looking to get an ak to compete with the functionality of the ar15.
Absolutely Outstanding(24/06/2011)
Pleased with this product is an understatement! The hardest part of the install was getting the old stock off! Seriously well made, looks good, and looks like it will last a very long time. I used a Mag pul MOE stock. The rifle looks great. At first I thought I was spending too much money but not anymore. It's well worth the price.
Great Product(25/03/2012)
Just arrived and it took me about 5 minutes to put this on my Mac 90, perfect fit, it took me longer to take off the original stock, strong and looks great, beats a plastic one any day, I will buy more.
Excellent accessory addition to AK(31/08/2013)
Installed easily. Fit perfect, no play like that of a folding stock. Adjustable for pull length. When combined with a Magpul Butt Stock (MIL-SPEC) you made a new AMERICAN FURNITURE version of the AK.
Mak90(15/09/2013)
I put this on a Mak90 (stamped) it fit great easy install . I shoot allot have many AK's Norinco is a bit hard to find parts that work well do to the heavy receiver and berral but this product works well . I like how stought the butt stock is and allows for AR type stock which most of us are use to allows for close combat or distance unlike what was on their.
A must for every tactical rigged AK.(06/06/2015)
Already have one on my WASR-10(also has an eotech exps 3-4). Transition from clearing rooms to engaging longer range targets in seconds. This will be my second VLTOR AK buffer tube. This one is going on my Saiga 12.