Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

MAGPUL
GL ENHANCED MAGAZINE WELLS FOR GLOCK® 17 GEN 3

840815117520 100900004

Ensure Mag Insertion in Stressful Situations

The Magpul GL Enhanced Magazine Well for GLOCK 17 GEN 3 is a high performance, purpose-built GLOCK frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events. The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity GLOCK factory magazines, Magpul GL9® PMAGs®, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory GLOCK magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere. Due to inherent variances in GLOCK frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force, Magpul recommend that a professional gunsmith complete the installation to mitigate the potential for frame damage. Made in the USA. FEATURES Reinforced polymer construction Easy installation Rugged polymer formula holds up to rough handling Large ramp area for easier reloading External dimensions ensure minimal printing during concealed carry Compatible with Magpul, OEM and most aftermarket floor plates and magazine extensions COMPATIBILITY Fits GEN 3 versions of the: G17, G17L, G22, G24, G31, G34, G35, G37. Compatible with Magpul, OEM and most aftermarket magazine floor plates. Compatible with most common after-market magazine extensions. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. Neither Brownells nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.m.b.H. products and parts visit www.glock.com.

Más...

Asegura la inserción del cargador en situaciones de estrés

El Magpul GL Enhanced Magazine Well está optimizado para su uso con cargadores estándar de Glock, cargadores Magpul GL y una variedad de bases y extensiones de cargadores aftermarket disponibles para ambos. Las generaciones recientes de cargadores de Glock de capacidad reducida (10 rd) tienen varias diferencias dimensionales que pueden interferir con cualquier pozo de cargador, incluido el Magpul GL Enhanced Magazine Well. Algunas bases de cargadores aftermarket de gran tamaño también pueden interferir.

Más...

Evaluaciones de clientes para MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK

Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,8

Be Careful (02/10/2017)

Will not work if you're using Glock backstraps, unless you are willing to modify.

Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.

DANGER/RIP OFF (30/09/2018)

There are three things wrong with this product that kills any usefulness. 1) Once installed, it will eliminate any ability to strip a stuck mag. The magpul part fills the magwell so that there is no room to gab the floor plate to assist in removing the mag. You will be at the total mercy of the mag free falling. 2) once installed, you will not be able to use any aftermarket mag floor plates, not even minimal ones from Vickers 3) It is not compatible with backstraps. You can file and file away to get it to fit, but chances are that you will do a poor job and it will have thrown away $20.

Mines defective! (18/06/2017)

This unit was super easy to install, it took me less than 15 seconds. The build quality appears good, until you insert a magazine. It does NOT go in easy! You literally have to slam it in hard for the magazine to properly catch,10 magazines later my palm couldn't take it no more! The next morning I called Magpul, they're sending me a replacement unit, but they claim this is normal, ??? If the new unit works, then I will update my review.

Another GREAT product from Magpul (29/06/2017)

It's a great mag-well! I installed them on all of my Gen-3's. They take about 30 seconds to install. They do make it easier and faster to do slide-lock (emergency) reloads. My only issue was that, some of my Gen-3's were a bit older and had a cutout on the front strap of the frame. I didn't care for the gap, so I contacted Glock USA and inquired into getting new frames, without the cutout. I followed their instructions, and in less than 10 days I had new replacement frames, without the cutout. I have to say, I was very impressed with Glock's service! All is good now!

Leer 4 mas calificaciones en brownells.com

39.9 39.9 1 EUR

New

N.º de producto: 100900004
MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK
Ref Fabricante: MAG908-BLK 840815117520 El Magpul GL Enhanced Magazine Well está optimizado para su uso con cargadores estándar de Glock, cargadores Magpul GL y una variedad de bases y extensiones de cargadores aftermarket disponibles para ambos. Las generaciones recientes de cargadores de Glock de capacidad reducida (10 rd) tienen varias diferencias dimensionales que pueden interferir con cualquier pozo de cargador, incluido el Magpul GL Enhanced Magazine Well. Algunas bases de cargadores aftermarket de gran tamaño también pueden interferir.

39.9 EUR 37 39,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Black Hacer: Glock Modelo: 17

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El Magpul GL Enhanced Magazine Well está optimizado para cargadores estándar de Glock y Magpul GL.
Puede haber interferencias con cargadores de capacidad reducida (10 rd) y bases de cargadores aftermarket de gran tamaño.
Compatible con una variedad de bases y extensiones de cargadores aftermarket.

Atributos

Acabado: Black Hacer: Glock Modelo: 17 Peso de entrega: 0,027kg Altura de envío: 159mm Ancho de envío: 44mm Longitud de envío: 44mm UPC : 840815117520

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.y.1

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Mejora tu Glock 17 con el Magpul GL Enhanced Magazine Well. Optimizado para cargadores estándar y aftermarket. 🚀 ¡Mejora tu experiencia de tiro!

Ensure Mag Insertion in Stressful Situations

Más...

Asegura la inserción del cargador en situaciones de estrés

Más...

Evaluaciones de clientes para MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK

Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,8

Be Careful (02/10/2017)

Will not work if you're using Glock backstraps, unless you are willing to modify.

Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.

DANGER/RIP OFF (30/09/2018)