Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

WILLIAMS GUN SIGHT
MARLIN DOVETAIL FIRE SIGHT SET

053506602179 962602170

Upgrade Your Factory Sights With Easy-To-See, Fiber Optics

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Dovetail replaces factory front and rear sights. Rear sight is screw adjustable for elevation and drift adjustable for windage; has two, green, fiber optic dots. Front has red, fiber optic rod.

SPECS: Aluminum, black anodized. Dovetail fits all Winchester and Marlin lever actions with ramped front sights. FP-94/36 fits Win. 94 top eject and models 55, 63, 64, and 65; Marlin 36, 336, 1894, 1895 and 444. Will not fit Win. 94/22. Requires two holes in the left side of the receiver and will require drilling and tapping on the newer guns. FP-94SE fits Win. 94 angle eject with front ramp, except Big Bore models. FP-336 fits Marlin 36, 336, 1894, 1895 and 444. Attaches to the top of the receiver and bolts up to factory drilled and tapped holes. FP-450 fits Marlin 450. WGRS-336 fits Marlin 336, 444, 44 and 1895. 5D-94 fits Winchester 94 top eject rifles. 5D-336 fits Marlin 336 rifles, mounts using scope mount holes.

Más...

Mejora las miras de fábrica con fibra óptica fácil de ver

Todos los conjuntos cuentan con una mira delantera brillante de fibra óptica en color rojo y una mira trasera completamente ajustable tipo peep o con muesca en U. Los conjuntos de mira trasera con muesca en U utilizan el preciso patrón de 3 puntos con dos puntos de fibra óptica en verde en la parte trasera para un contraste agudo y una rápida adquisición de la mira en todas las condiciones de luz. No se requiere perforación ni roscado para la mayoría de los modelos de rifles. Las miras delantera y trasera con Dovetail pueden requerir un ajuste menor. Para rifles de acción de palanca de Marlin y Winchester. El Dovetail reemplaza las miras delanteras y traseras de fábrica. La mira trasera es ajustable en elevación mediante tornillo y ajustable en deriva para el viento; tiene dos puntos de fibra óptica en verde. La delantera tiene una varilla de fibra óptica en rojo.

ESPECIFICACIONES: Aluminio, anodizado en negro. El Dovetail encaja en todas las acciones de palanca de Winchester y Marlin con miras delanteras con rampa. FP-94/36 es compatible con Win. 94 de eyección superior y modelos 55, 63, 64 y 65; Marlin 36, 336, 1894, 1895 y 444. No es compatible con Win. 94/22. Requiere dos agujeros en el lado izquierdo del receptor y necesitará perforación y roscado en las armas más nuevas. FP-94SE es compatible con Win. 94 de eyección angular con rampa delantera, excepto los modelos Big Bore. FP-336 es compatible con Marlin 36, 336, 1894, 1895 y 444. Se adjunta en la parte superior del receptor y se atornilla a los agujeros perforados y roscados de fábrica. FP-450 es compatible con Marlin 450. WGRS-336 es compatible con Marlin 336, 444, 44 y 1895. 5D-94 es compatible con los rifles Winchester 94 de eyección superior. 5D-336 es compatible con los rifles Marlin 336, se monta utilizando los agujeros para monturas de mira.

Más...

Evaluaciones de clientes para WILLIAMS GUN SIGHT MARLIN FIBER OPTIC DOVETAIL FIRE SIGHT SET MULTI

Número de evaluaciones: 13
De brownells.com: 13
Evaluación media: 2,7

Winchester Model 94 XTR Chambered in 375 (27/01/2010)

I installed the dovetail sight set and was thrilled with the sight picture; the fiber optics really make sight acquisition easy. However, no joy when I took the rifle to the range. I couldn't hit the target at 25 steps...too high. After adjusting the rear sight as low as it would go (i.e. removed the set screw), I just did hit the top of the box to which I had placed a shoot-n-see target. I guess the only option is to raise the front sight, and this will be nothing but a snag in the gun case.

Easy,bright sight (12/06/2010)

Put these sights on a MArlin 1895 Cuide Gun with the ported barrel. Very easy to install and the sight picture is much better than the stock sight. I shoot hot hand loads and sighting in at 100 yards I had to crank the rear sight almost to the very top of the adjustment screw. I will be buying another set for a different 45-70 rifle I have.

Excellent inexpensive sight. (06/12/2010)

I put a set of these on my 1895 45-70 and 1894 44 mag Marlins. The 1895 install corrected a problem the factory sights had, shooting 5" low. The sight set comes with an M type front insert, but the 1894 requires an N width of the same height #34. It is very common to have to juggle front sight insert height on different lever guns chambered for different cartridges, 0.009" per inch of shift at 50 yards.

Sight picture is excellent, sights are highly visible and it is nice to have simple windage adjustment.

Not enough adjustment available (09/04/2011)

Tried it on a Marlin 336 and a Winchester model 94. Sight picture and visibility is great! Unfortunately, there's not enough adjustment to get either one of these rifles to hit paper. The front and rear sight heights are made way too far off from each other to get the elevation adjusted correctly. I had to go back to the original sights.

Good Speed Sights (21/06/2012)

Installed on Marlin 1894. As mentioned in GunTech article, also order the the .312 N front blade which fits Marlin better. With rear all the way down and using .312 front, able to tear up the target center at 25 yds. at speed.

Big improvement over factory sights. (09/08/2012)

Needed minor fitting (filing) of the front sight. Rear sight was an easy swap. Took about 30 minutes to install both. Makes for a quick sight picture. Easy to adjust- will need a very small screwdriver to do so. Makes my Marlin 1895G much easier for me to shoot accurately.

Didn't Work (24/09/2012)

Great low light visibility. Installed a set on my Winchester 94 in 356. Shoots 16" high @ 100 meters with rear sight all the way down. Judging by other's comments this is a common scenario. Wish Williams wouldn't have advertised it for this gun. I would have saved myself a lot of time.

not for a marlin 336 (13/06/2013)

Rear sight was easy to install, Front sight took some machining to clear the barrel band. With the rear sight at the lowest setting the gun was 2 feet high at 25 yards. Wasted time and money. Expected more from a williams product.

great sights (29/06/2013)

Well I don't know about other lever guns but they fit my Marlin 1895 guide gun with no issues. I just filed the front sight until it fit like the old one and now it looks like it came that way. Took it out to the range and it sighted in nice and easy.

good for the money (27/12/2013)

good for low light hunting

good sights for Win 94/22M (15/08/2014)

Installed on a 30 yr old Winchester 94/22 in 22M. First shot on the bull at 15yds. A little low at 100. sight picture is incredible good product.

Not for a Marlin 336 (22/02/2016)

I agree with the pervious comment by Earl. I installed these sights om a Marlin 336. Installation was fairly straightforward.

But the rifle shoots 16 inches high at 50 yards. This may fit a variety of rifles, but it just does not work on a 336. Wasted money

gun shoots over 12 high at 100 yds now (09/04/2017)

front sight to low for Winchester 94

Leer 13 mas calificaciones en brownells.com

79.9 79.9 1 EUR

N.º de producto: 962602170
WILLIAMS GUN SIGHT MARLIN FIBER OPTIC DOVETAIL FIRE SIGHT SET MULTI
Ref Fabricante: 60217 053506602179 Todos los conjuntos cuentan con una mira delantera brillante de fibra óptica en color rojo y una mira trasera completamente ajustable tipo peep o con muesca en U. Los conjuntos de mira trasera con muesca en U utilizan el preciso patrón de 3 puntos con dos puntos de fibra óptica en verde en la parte trasera para un contraste agudo y una rápida adquisición de la mira en todas las condiciones de luz. No se requiere perforación ni roscado para la mayoría de los modelos de rifles. Las miras delantera y trasera con Dovetail pueden requerir un ajuste menor. Para rifles de acción de palanca de Marlin y Winchester. El Dovetail reemplaza las miras delanteras y traseras de fábrica. La mira trasera es ajustable en elevación mediante tornillo y ajustable en deriva para el viento; tiene dos puntos de fibra óptica en verde. La delantera tiene una varilla de fibra óptica en rojo.

79.9 EUR 0 79,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Color: Multi Color del punto de mira: Red/Green Estilo: Fiber Optic Hacer: Marlin, Winchester Modelo: Universal Rifles

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El conjunto incluye una mira delantera de fibra óptica roja y una mira trasera ajustable tipo peep o con muesca en U, con puntos verdes para un contraste agudo.
Compatible con rifles de acción de palanca Marlin y Winchester, reemplazando las miras de fábrica sin necesidad de perforación ni roscado en la mayoría de los modelos.
Fabricado en aluminio anodizado negro, el Dovetail encaja en varias series de rifles, incluyendo Win. 94 y Marlin 336, 1894, 1895 y 444, con especificaciones detalladas para cada modelo.

Atributos

Color: Multi Color del punto de mira: Red/Green Estilo: Fiber Optic Hacer: Marlin,Winchester Modelo: Universal Rifles Peso de entrega: 0,032kg Altura de envío: 8mm Ancho de envío: 99mm Longitud de envío: 152mm UPC : 053506602179

Detalles del artículo

Hecho en USA

Mejora tu puntería con el conjunto de mira Dovetail de fibra óptica Marlin 🔴. Compatible con rifles Marlin y Winchester, ¡disfruta de una rápida adquisición de mira!