Extended base pads of machined aluminum or Delrin® clamp securely to the magazine with an aluminum retainer plate, eliminating unexpected “speed-unloads” when a plastic snap-on extender fails. Designed to keep magazine overall length within the 140mm and 170mm USPSA and IPSC limits. Glock® models include extended magazine spring, and are available in Drop configuration that fits “drop-free” magazines or Non-Drop Pad that fits original, non-drop magazines.
Las almohadillas de base extendidas de aluminio mecanizado o Delrin® se sujetan de forma segura al cargador con una placa de retención de aluminio, eliminando las "descargas rápidas" inesperadas cuando falla un extensor de plástico a presión. Diseñadas para mantener la longitud total del cargador dentro de los límites de 140mm y 170mm de USPSA e IPSC. Los modelos para Glock® incluyen un resorte de cargador extendido, y están disponibles en la configuración Drop que encaja en los cargadores "drop-free" o en el Non-Drop Pad que se ajusta a los cargadores originales, no drop.
ESPECIFICACIONES: Aluminio mecanizado, anodizado duro, o Delrin (solo para Glock), negro. Abrazadera de aluminio, plata natural.
Más...
Evaluaciones de clientes para TAYLOR FREELANCE DROP MAG PAD +12 170MM FOR GLOCK®
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,1
Can't get plus 8(30/09/2012)
I put the long extension on a 22 round Glock .40S&W magazine, can only get 5 extra rounds in mag. Otherwise nice product.
I would buy more of this(10/11/2012)
Great product to increase magazine capacity for your Glock. Made for competition shooting. Bought one for my Glock 17 and after contouring the follower, it works flawlessly. Will be buying more of these.
Good and Bad(25/06/2016)
I have tried many brands of mag extensions while shooting USPSA and 3 gun matches. I purchased 2 of these for shooting open division with my Glock G17. They are easy to install and I was able to get 27 rounds in one and 28 in another when added to a factory G17 mag. I start a stage with these mags and don't reload them during a stage. The 28 rounder can be harder to seat on a closed slide so would have to download one round for reloads. Many of the local range surfaces can be rocky and we also shoot indoor matches in the winter. Both magazines have broken where it attaches to the G17 mag. Although this is extreme conditions to expect equipment to operate in, I have never had this problem with any other mag extensions. My favorites are the Taran Tacticals however since I am not aware of any other +8s for the Glock I will purchase 2 more.
Nice but can only fit 4(04/11/2009)
Cannot seem to get the last round in my G22 magazine to make it +5.
Works!(18/09/2010)
20 rounds fit in the mag, but good luck getting that magazine to seat. Loaded with 20, it runs flawlessly when inserted at slide lock. Bought one to test first. Now I'm buying more.
Great Product(29/12/2010)
Bought four and installed without issue. Were hard to load to capacity at first. No issues after one session at range. No issue seating on closed slide. Functioned flawlessly. Tried the other popular versions but had endless issues. Strongly recommend.
Love these!(20/09/2011)
I love these things, by far one of my favorite improvements to my Glocks. Yes, it is difficult to load it to capacity but with the Glock loading tool I had no problems. If you are not able to fit all +5 rounds into the mags then you might want to disassemble the mags again and make sure that there are no bur's or edges catching on the spring. I had this issue with one of my mags, and it was quickly remedied with a little smoothing.
Good Extender(16/11/2016)
I have several of these & they work fine. Getting a stock Glock magazine baseplate is the hardest part of the installation. After that, it takes only a few moments to complete. It's well-made & looks OK; and it works.
Feeding problems (23/11/2016)
I put these on a M&P 9 without any problems. I and another person put them on our mags for gen 4 Glock 22 pistols and both of us had numerous feeding issues. I haven't tried them in a Gen 3 Glock as of yet to see if that makes a difference yet.
N.º de producto: 100000035 TAYLOR FREELANCE DROP MAG PAD +12 170MM FOR GLOCK® Las almohadillas de base extendidas de aluminio mecanizado o Delrin® se sujetan de forma segura al cargador con una placa de retención de aluminio, eliminando las "descargas rápidas" inesperadas cuando falla un extensor de plástico a presión. Diseñadas para mantener la longitud total del cargador dentro de los límites de 140mm y 170mm de USPSA e IPSC. Los modelos para Glock® incluyen un resorte de cargador extendido, y están disponibles en la configuración Drop que encaja en los cargadores "drop-free" o en el Non-Drop Pad que se ajusta a los cargadores originales, no drop.
Las almohadillas de base extendidas están hechas de aluminio mecanizado o Delrin®, y se sujetan con una placa de retención de aluminio para evitar descargas rápidas inesperadas.
Diseñadas para cumplir con los límites de longitud de cargador de 140mm y 170mm según las normas de USPSA e IPSC.
Incluyen un resorte de cargador extendido y están disponibles en configuraciones Drop y Non-Drop para cargadores Glock®.
Atributos
Estilo:
Base Pads
Hacer:
Glock
Modelo:
17,17L,18,19,22,23,24,24C
Peso de entrega: 0,068kgAltura de envío: 30mmAncho de envío: 74mmLongitud de envío: 315mm
Detalles del artículo
Hecho en USA
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
¡Mejora tu Glock® con el EXTENDED MAG PAD de Taylor Freelance! 🚀 Diseño seguro y duradero para cargadores de hasta 170mm. ¡Consíguelo ya!
Extended base pads of machined aluminum or Delrin® clamp securely to the magazine with an aluminum retainer plate, eliminating unexpected “speed-unloads” when a plastic snap-on extender fails. Designed to keep magazine overall length within the 140mm and 170mm USPSA and IPSC limits. Glock® models include extended magazine spring, and are available in Drop configuration that fits “drop-free” magazines or Non-Drop Pad that fits original, non-drop magazines.
Las almohadillas de base extendidas de aluminio mecanizado o Delrin® se sujetan de forma segura al cargador con una placa de retención de aluminio, eliminando las "descargas rápidas" inesperadas cuando falla un extensor de plástico a presión. Diseñadas para mantener la longitud total del cargador dentro de los límites de 140mm y 170mm de USPSA e IPSC. Los modelos para Glock® incluyen un resorte de cargador extendido, y están disponibles en la configuración Drop que encaja en los cargadores "drop-free" o en el Non-Drop Pad que se ajusta a los cargadores originales, no drop.
ESPECIFICACIONES: Aluminio mecanizado, anodizado duro, o Delrin (solo para Glock), negro. Abrazadera de aluminio, plata natural.
Más...
Evaluaciones de clientes para TAYLOR FREELANCE DROP MAG PAD +12 170MM FOR GLOCK®
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,1
Can't get plus 8(30/09/2012)
I put the long extension on a 22 round Glock .40S&W magazine, can only get 5 extra rounds in mag. Otherwise nice product.
I would buy more of this(10/11/2012)
Great product to increase magazine capacity for your Glock. Made for competition shooting. Bought one for my Glock 17 and after contouring the follower, it works flawlessly. Will be buying more of these.
Good and Bad(25/06/2016)
I have tried many brands of mag extensions while shooting USPSA and 3 gun matches. I purchased 2 of these for shooting open division with my Glock G17. They are easy to install and I was able to get 27 rounds in one and 28 in another when added to a factory G17 mag. I start a stage with these mags and don't reload them during a stage. The 28 rounder can be harder to seat on a closed slide so would have to download one round for reloads. Many of the local range surfaces can be rocky and we also shoot indoor matches in the winter. Both magazines have broken where it attaches to the G17 mag. Although this is extreme conditions to expect equipment to operate in, I have never had this problem with any other mag extensions. My favorites are the Taran Tacticals however since I am not aware of any other +8s for the Glock I will purchase 2 more.
Nice but can only fit 4(04/11/2009)
Cannot seem to get the last round in my G22 magazine to make it +5.
Works!(18/09/2010)
20 rounds fit in the mag, but good luck getting that magazine to seat. Loaded with 20, it runs flawlessly when inserted at slide lock. Bought one to test first. Now I'm buying more.
Great Product(29/12/2010)
Bought four and installed without issue. Were hard to load to capacity at first. No issues after one session at range. No issue seating on closed slide. Functioned flawlessly. Tried the other popular versions but had endless issues. Strongly recommend.
Love these!(20/09/2011)
I love these things, by far one of my favorite improvements to my Glocks. Yes, it is difficult to load it to capacity but with the Glock loading tool I had no problems. If you are not able to fit all +5 rounds into the mags then you might want to disassemble the mags again and make sure that there are no bur's or edges catching on the spring. I had this issue with one of my mags, and it was quickly remedied with a little smoothing.
Good Extender(16/11/2016)
I have several of these & they work fine. Getting a stock Glock magazine baseplate is the hardest part of the installation. After that, it takes only a few moments to complete. It's well-made & looks OK; and it works.
Feeding problems (23/11/2016)
I put these on a M&P 9 without any problems. I and another person put them on our mags for gen 4 Glock 22 pistols and both of us had numerous feeding issues. I haven't tried them in a Gen 3 Glock as of yet to see if that makes a difference yet.