Reduced Power Tune-Up Pak fits 10/22® in all calibers. Includes an extra power hammer spring, reduced power trigger spring, and reduced power sear spring to improve let-off and reduce trigger pull, perfect for competition. Tune-Up Pak fits all calibers of 10/22®. Includes an extra power hammer spring, extra power trigger spring, and reduced power sear spring for a clean, crisp trigger pull, perfect for hunting. For an even smoother, lighter-feeling trigger pull, install the reduced power (RP) trigger/sear spring. Tune-Up Paks do not include recoil springs.
Más...
Kits para Mejorar el Funcionamiento
El Reduced Power Tune-Up Pak es compatible con el 10/22® en todos los calibres. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de potencia reducida y un muelle de disparador de potencia reducida para mejorar el desenganche y reducir el peso del disparador, perfecto para competición. El Tune-Up Pak es compatible con todos los calibres del 10/22®. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de extra potencia y un muelle de disparador de potencia reducida para obtener un disparo limpio y nítido, perfecto para la caza. Para un disparo aún más suave y ligero, instala el muelle de gatillo/disparador de potencia reducida (RP). Los Tune-Up Paks no incluyen muelles de retroceso.
Más...
Evaluaciones de clientes para WOLFF REDUCED POWER TUNE-UP PAK
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4,3
This is what you want(10/12/2010)
I add this kit to a Power Custom ADJUSTABLE hammer, sear and trigger kit, then shim with LC Shively shims for the very best OEM 10/22 Trigger Group that I can build. trigger pull is usually 2.5 lbs or less with externally adjustable creep and over travel.
Makes a very crisp trigger.(24/09/2011)
I really like the trigger on my 10/22 now. breaks like glass and is kettle cooked chip crisp!
Wise Choice(07/05/2012)
Intalled and fired hundreds of rounds so far. The trigger pull (after a lot of polishing!) isn't even comparable to stock, and no light strikes.
Reduced Power spring kit by Wolff(14/04/2014)
The factory 10/22 trigger on newer rifles are horrible! Purchased this and installed the sear and trigger return springs. Didn't use the increased hammer spring as I've never had issues with light strikes.
Along with polishing the sear engagements with 4000 grit wet dry it breaks like glass. My trusty trigger pull gauge says 3.1 lbs. That's very acceptable for a plinking / hunting rifle.
For those who might be leary about doing this yourself go to YOUTUBE as there are plenty of videos on disassembly of the trigger group.
Reduced power spring kit(16/07/2015)
My stock trigger measure 6 lb 3 oz and after I installed the kit it went down exactly 1 lb. Its not worth the effort. I used a digital trigger gauge. I took the average of 5 pulls.
Comes w/3 springs, 1 is too long.(22/07/2011)
Comes w/xtra pwr. hammer spring,reduced pwr. sear spring, & xtra pwr. trigger spring, which @ full compression is about 1/12" too long. Though, if you slowly, painstakingly shorten the trigger de-tints nose (yeah, putting that assbly. back together 8-10 times really sucks), to use trigger spring, end result is a custom fit trigger stop (yeah!!) or, order the factory Ruger spring Brownells sells separately. For a full trigger job, decrease sear overlap,hone & polish before setting trigger stop. Don't forget a new factory recoil spring/rod assbly. too!
Easy to install(17/01/2012)
Went in easy with no custom fitting required. Only a slight pull increase so i didn't throw my accuracy at the range when shooting free-hand.
N.º de producto: 969000204 WOLFF REDUCED POWER TUNE-UP PAK Ref Fabricante: 18076 El Reduced Power Tune-Up Pak es compatible con el 10/22® en todos los calibres. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de potencia reducida y un muelle de disparador de potencia reducida para mejorar el desenganche y reducir el peso del disparador, perfecto para competición. El Tune-Up Pak es compatible con todos los calibres del 10/22®. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de extra potencia y un muelle de disparador de potencia reducida para obtener un disparo limpio y nítido, perfecto para la caza. Para un disparo aún más suave y ligero, instala el muelle de gatillo/disparador de potencia reducida (RP). Los Tune-Up Paks no incluyen muelles de retroceso.
Compatible con todos los calibres del 10/22® y mejora el desenganche y el peso del disparador.
Incluye muelles de martillo de extra potencia, de gatillo de potencia reducida y de disparador de potencia reducida.
Perfecto para competición y caza, aunque no incluye muelles de retroceso.
Atributos
Hacer:
Ruger
Modelo:
10/22
Peso de entrega: 0,018kgAltura de envío: 5mmAncho de envío: 89mmLongitud de envío: 178mm
Detalles del artículo
Hecho en USA
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
N.º de producto: 969180750 WOLFF KIT 18075 TUNE-UP PAK Ref Fabricante: 18075 El Reduced Power Tune-Up Pak es compatible con el 10/22® en todos los calibres. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de potencia reducida y un muelle de disparador de potencia reducida para mejorar el desenganche y reducir el peso del disparador, perfecto para competición. El Tune-Up Pak es compatible con todos los calibres del 10/22®. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de extra potencia y un muelle de disparador de potencia reducida para obtener un disparo limpio y nítido, perfecto para la caza. Para un disparo aún más suave y ligero, instala el muelle de gatillo/disparador de potencia reducida (RP). Los Tune-Up Paks no incluyen muelles de retroceso.
26.9EUR026,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Reduced Power Tune-Up Pak fits 10/22® in all calibers. Includes an extra power hammer spring, reduced power trigger spring, and reduced power sear spring to improve let-off and reduce trigger pull, perfect for competition. Tune-Up Pak fits all calibers of 10/22®. Includes an extra power hammer spring, extra power trigger spring, and reduced power sear spring for a clean, crisp trigger pull, perfect for hunting. For an even smoother, lighter-feeling trigger pull, install the reduced power (RP) trigger/sear spring. Tune-Up Paks do not include recoil springs.
Más...
Kits para Mejorar el Funcionamiento
El Reduced Power Tune-Up Pak es compatible con el 10/22® en todos los calibres. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de potencia reducida y un muelle de disparador de potencia reducida para mejorar el desenganche y reducir el peso del disparador, perfecto para competición. El Tune-Up Pak es compatible con todos los calibres del 10/22®. Incluye un muelle de martillo de extra potencia, un muelle de gatillo de extra potencia y un muelle de disparador de potencia reducida para obtener un disparo limpio y nítido, perfecto para la caza. Para un disparo aún más suave y ligero, instala el muelle de gatillo/disparador de potencia reducida (RP). Los Tune-Up Paks no incluyen muelles de retroceso.
Más...
Evaluaciones de clientes para WOLFF REDUCED POWER TUNE-UP PAK
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4,3
This is what you want(10/12/2010)
I add this kit to a Power Custom ADJUSTABLE hammer, sear and trigger kit, then shim with LC Shively shims for the very best OEM 10/22 Trigger Group that I can build. trigger pull is usually 2.5 lbs or less with externally adjustable creep and over travel.
Makes a very crisp trigger.(24/09/2011)
I really like the trigger on my 10/22 now. breaks like glass and is kettle cooked chip crisp!
Wise Choice(07/05/2012)
Intalled and fired hundreds of rounds so far. The trigger pull (after a lot of polishing!) isn't even comparable to stock, and no light strikes.
Reduced Power spring kit by Wolff(14/04/2014)
The factory 10/22 trigger on newer rifles are horrible! Purchased this and installed the sear and trigger return springs. Didn't use the increased hammer spring as I've never had issues with light strikes.
Along with polishing the sear engagements with 4000 grit wet dry it breaks like glass. My trusty trigger pull gauge says 3.1 lbs. That's very acceptable for a plinking / hunting rifle.
For those who might be leary about doing this yourself go to YOUTUBE as there are plenty of videos on disassembly of the trigger group.
Reduced power spring kit(16/07/2015)
My stock trigger measure 6 lb 3 oz and after I installed the kit it went down exactly 1 lb. Its not worth the effort. I used a digital trigger gauge. I took the average of 5 pulls.
Comes w/3 springs, 1 is too long.(22/07/2011)
Comes w/xtra pwr. hammer spring,reduced pwr. sear spring, & xtra pwr. trigger spring, which @ full compression is about 1/12" too long. Though, if you slowly, painstakingly shorten the trigger de-tints nose (yeah, putting that assbly. back together 8-10 times really sucks), to use trigger spring, end result is a custom fit trigger stop (yeah!!) or, order the factory Ruger spring Brownells sells separately. For a full trigger job, decrease sear overlap,hone & polish before setting trigger stop. Don't forget a new factory recoil spring/rod assbly. too!
Easy to install(17/01/2012)
Went in easy with no custom fitting required. Only a slight pull increase so i didn't throw my accuracy at the range when shooting free-hand.